Good Andn Easy Diy Roller Blind Motor Controller Board Kit Opener
motorized automatic roller shutter, blind, window curtain, drapes, shade
Power supply and wiring
|Working power||connect port|
|220vac||L,N, UP, COM.DOWN|
L:220V Live wire
- Wiring chart
N:220V Neutral wire
UP:uplink of motor
DWN:downlink of motor
Connect the COM of motor with the 220V Neutral wire.
Press the button P of the new remote control and then power up the receiver, 5s later receiver will buzz "BI BI" which indicates the receiver is into programming mode
- Remote control programming
If the remote control have been programmed before, receiver is powered up and into normal work status and then press the button P on the remote control exceed 5s, receiver will buzz "BI BI" and into learn mode.
In the programming mode, press the UP button of the remote which you want to program and the receiver buzz 3 time shortly indicates programming is successful. The receiver will exit programming mode if there is no more remote control programmed within 10s.
If the receiver works conversely as expected, press button P exceed 5s, receiver will buzz "BI BI" and then press Down button, receiver will buzz "BI BI" 3 times , then the uplink and downlink have been switched.
- Memory clearance
Receiver powered up and into normal working status, press the Stop button of the programmed remote control exceed 8s, the LED light of the remote control will stop for 2s and then flash quickly, wait for another 5s and receiver will buzz 3 times shortly, all memory on the receiver have been erased.