Basic Info.
Measuring Range
Max +/-90deg
Wide Temperature Working
-40-+85c
Highly Anti-Vibration Performance
>100g
Transport Package
1PCS in Each Inner Box, 100PCS /CTN
Product Description
General Description
HCA716S/HCA726S is a small volume high accuracy inclinometer launched by RION company to the industrial field control , using RS485/RS232 Serial interface , MODBUS RTU standard protocol format .Built-in high-precision 24bit A /D differential converter, by 5 filtering algorithm, which can measure the angle of sensor output relative to the horizontal tilt and pitch tilt.The product integration of the latest technology to the main MEMS tilt unit, measuring range of +-180 degrees, full range accuracy of 0.01 degrees, can easily achieve biaxial and uniaxial inclination measurement .The products are truly industrial-grade products, reliable performance, scalability, and a variety of output options. The utility model is suitable for the control of the angle of the photovoltaic cell board, the orientation of the photovoltaic cell board, the measurement of the angle of various thermal power generation mirrors, and the large range high precision measurement of industrial sites.
Features:
Single/dual Axis Inclinometer
Measuring Range :±1~±90° optional
Accuracy: refer to the technical data
Wide voltage input: 9~36V
Wide temperature working: -40~+85ºC
Resolution: 0.001°
IP67 protection class
Highly anti-vibration performance >100g
Direct lead cable interface
Small size : 54×44×18mm(customized)
Output mode: MODBUS
Application:
Satellite positioning Search
Rail-mobile monitoring
engineering mechanical measurement of dip angle
oil-well drilling equipment
Radar detection of vehicle platform
Underground drill posture navigation
Gun Barrel angle measurement in early shooting
Based on the angle direction measurement
Satellite communications vehicle posture detection
Shield pipe jacking application
Ship's navigation posture measurement
Geological equipment inclined monitoring
Technical Data
Parameters | Conditions | HCA726S-15 | HCA726S-45 | HCA726S-60 | HCA716V-180 | Unit |
Measuring range | | ±15 | ±45 | ±60 | ±180 | ° |
Measuring axis | | X,Y | X,Y | X,Y | Vertical X axis | |
Resolution | | 0.001 | 0.001 | 0.001 | 0.001 | ° |
Absolute accuracy | @25ºC | ±0.008 | ±0.01 | ±0.01 | ±0.01 | ° RMS |
Long term stability | | <0.02 | <0.02 | <0.02 | <0.02 | ° |
Zero temperature coefficient | -40~85° | ±0.0005 | ±0.0005 | ±0.0005 | ±0.0005 | °/ºC |
Sensitivity temperature coefficient | -40~85° | ≤0.01 | ≤0.01 | ≤0.01 | ≤0.01 | %/ºC |
Power on time | | 0.5 | 0.5 | 0.5 | 0.5 | S |
Response time | | 0.02 | 0.02 | 0.02 | 0.02 | s |
Response frequency | >20HZ |
Output signal | RS232 or RS485 (MODBUS RTU) |
EMC | According to EN61000 and GBT17626 |
MTBF | ≥50000 Hours/times |
Insulation Resistance | ≥100M |
Shockproof | 100g@11ms,3Times/Axis(half sinusoid)) |
Anti-vibration | 10grms,10~1000Hz |
Protection glass | IP67 |
Cables | Standard 1M length,wearproof,grease proofing,wide temperature, Shielded cables 4*0.2mm2 |
Weight | 120g( without cable) |
Electronic Characteristics
Parameters | Conditions | Min | Standard | Max | Unit |
Power supply | Standard | 9 | 12,24 | 36 | V |
Working current | non-loaded | | 40 | | mA |
Working temperature | | -40 | | +85 | ºC |
Store temperature | | -40 | | +85 | ºC |
Working Principle
Adopt the European import of core control unit, using the capacitive micro pendulum principle and the earth gravity principle, when the the inclination unit is tilted, the Earth's gravity on the corresponding pendulum will produce a component of gravity, corresponding to the electric capacity will change,, by enlarge the amount of electric capacity , filtering and after conversion then get the inclination.
Measuring Directions&Fix
The installation must guarantee the product bottom is parallel to measured face,and reduce the influence of dynamic and acceleration to the sensor. This product can be installed horizontally or mounted vertically (mounted vertically selection is only applicable to the single axis), for installation please refer to the following scheme.
Address:
4th Floor Block 1, Cofco(Fuan) Robot Industry Park, Da Yang Road 90, Fuyong Distict, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other, Group Corporation
Business Range:
Instruments & Meters
Management System Certification:
ISO 9001, ISO 9000, ISO 14000
Company Introduction:
RION Technology Co., Ltd. Is located in a fantastic city - Shenzhen. Our company is a high technology company that integrates research, development, production and sale, and is mainly engaged in the sale of inclinometer sensors, digital compasses, digital dipmeters and acceleration sensors. These products are widely used in many industrial control fields, such as automobiles, ships, airplanes, railways, medical facilities, dam safety monitoring, oil drilling, coal mining and ocean surveying. Our company has established good business relationships with many international famous companies.
We adhere to the service guideline of "Client-centered". "Client uppermost, credit first, service best" is our business philosophy. Our company provides accurate, efficient, civilized and complete services for clients.
Let us provide you with the best products. To save purchasing cost and time, contact us now.