Basic Info.
Function
Didactic Equipment for University
Purpose
Vocational Training Equipment for University
Product Description
MR321E Minrry Solar Power Generation Training
Equipment Electronic Trainer Digital Education Laboratory Equipment
I. Equipment Overview
1 Introduction
1.1 Overview
This training system simulate demo solar generate electricity process, enable students to
learn solar generate electricity. Solar energy panel is driven by high work power metal
halide. This trainer cultivate students hand on ability, it's suitable for engineering university,
training institute, technical schools.
1.2 Feature
(1)This trainer use aluminum column structure, with inner integrated measurement meters, there is universal wheels at the bottom, it's easy to move.
(2) It can do many experiment circuit and components, students can combine them to
different circuit, do different experiments and training content.
(3) Training workbench with safety protection system.
2. Performance parameter
(1) Solar power generation device: full aluminum structure, adjustable photovoltaic panel, boundary dimension is 800mm*800mm*1200mm(length× width× height).
(2) Power box unit: aluminum profile structure, aluminum hanging box , boundary dimension 1080mm×300mm×740mm(length× width× height).
(3) Single solar energy cell plate:
(4) Battery technical specification:
(5) Work condition:
(6) Power:
3. System introduction
This system is consisted of four parts: photovoltaic power generation system, control system and inverter system. The photovoltaic power system is consisted of photovoltaic cell panel and battery. Control system is made up of solar power generation controller. Inverter system is made up of frequency inverter and load unit.
1. Simulative photovoltaic power generation system: this system adopts three pieces of 18V,20W solar panel, it can carry out series and parallel connection according to different system voltage, it can simulate the sunlight location through adjusting the relative location with photovoltaic panel, then it's easy to simulate demonstration of various sunlight condition. Simulation photovoltaic power generator as shown below.
The output of photovoltaic cell panel connect to connecting box which located in the rear of device, output it through safety terminal. The rated output voltage of single block photovoltaic cell panel is 18V, three pieces of cell panel can operate individual, and it also can operate in parallel.
MR010E Programmable Logic Control Trainer
Input power | three phases, five wires, 380V±10% 50Hz |
Dimension | 1600mm×800mm×1300mm(desktop type) |
Weight | <100kg |
Whole capacity | <1.5KVA |
Environment temperature | -10ºC~+40ºC |
Relative humidity | <85%(25ºC) |
Simulation photovoltaic power generatorIndicator light condition explanation 3.2 Power control panel(1) Voltage, current output indicator (2) Equip with power indicator, safety power output terminal. (3) Inner with AC power source, with short circuit protection function. And students can observe inner power box structure through transparent window.3.3 Equip components (1) Controller hanging box 1 piece (2) Inverter hanging box 1 piece(3) Meter box hanging box 2 pieces(4) Terminal load hanging box 2 pieces(5) 4mm safety electrical connection cable 40 eas
4 Experiment list (1) Battery feature test:1) electricity technical parameter 2) Battery connect in series and parallel(2) Charge controller experiment:1) connect inversed protection experiment 2) Controller protection on battery overcharge 3) Controller protection on battery over discharging experiment 4) Anti charge experiment(3) Generator work power test experiment (4) Photovoltaic battery open circuit voltage test experiment (5) Photovoltaic battery short circuit current test experiment (6) Photovoltaic battery work power test experiment (7) To test photovoltaic battery different maximum test experiment under different illumination(8) Photovoltaic battery output feature experiment (9) Photovoltaic battery charging control principle experiment (10)Photovoltaic battery anti charging experiment (11) Photovoltaic battery connect in series and parallel experiment (12) Inverter basic principle experiment (13) Simple inverter output waveform test experiment (14) Photovoltaic battery connect in series and in parallel experiment (15) Inverter basic principle experiment (16) Simple inverter output waveform test experiment (17) Inverter power drive AC load experiment 3 Product composition3.1 Power control screenThe power control panel adopts aluminum alloy profile panel, closed box body structure, and the lower shelf is connected to one.3.2 Training benchThe actual training table is supported by the aluminum profile column, and the bottom wanxiang wheel brake is flexible and can be moved and positioned flexibly. The tabletop uses the high density base plate of 25mm thick, the surface high temperature and high pressure fire prevention board face treatment, complete with three guide type drawer 2, sliding door type bottom cabinet 2 pieces, the structure is firm, beautiful and generous.3.3 Power control screen configuration(1) The input of three-phase five-wire power supply, controlled by the leakage circuit breaker, has the emergency stop control button, and in case of emergency, press the emergency stop button breaker to cut off the power supply.(2) Equipped with power indicator, power output socket and secure type power supply terminal.(3) Configuration ac motor special protection switch, built-in ac power supply, short circuit protection function.(4) Built-in AC power and short circuit protection.
Power supply box, AC 1ph & 3ph and DC outputs:- 01 output variable DC 0 to 230V / 10A min, with security socket and protected by circuit breaker- 01 output variable DC 0 to 230V / 1A for rotor excitation, protected by circuit breaker- 01 output variable AC 3ph, with protected sockets, 0 to 430V + N / 5A protected by circuit breaker- 01 output constant AC 3ph, with protected sockets, 400V + N / 10A protected by circuit breaker- 04 outputs at least on single phase sockets 230V + Ground, 16A protected by circuit breakerThe box must be protected by a differential circuit breaker with high sensibility, emergency push button and key switch. It should be also protected against DC motor run-away by general cut-off, a synoptic in front illustrate the cabling drawing and light indicators which indicate voltage presence4.Equipped components(1)1 field rheostat for DC machines(2)1 starting rheostat for DC motors(3)1 rheostat for rotoric start for slip rings motor(4)1 resistive load 3ph variable by rows (by switches), having same power as the required machines (DC and AC generator)(5) 1 capacitive load 3ph variable by rows (by switches or hand wheel), having same power as the required machines DC and AC generator)(6)1 inductive load 3ph variable by rows (by switches), having same power as the required machines (DC and AC generator)(7)1 DC machine with shunt excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(8)1 DC machine with serial excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(9) 1 DC machine with combined excitation, minimal power 0.75 kW, 220V, 1500 rpm can operate as motor and generator(10)1 asynchronous motor, cage rotor 3ph, 220/380V 50Hz, 1500rpm, 0.75kW min
(11)1 DAHLANDER double speed asynchronous motor cage rotor, 380V 50Hz, 0.75kW min, 1500 and 3000 rpm(12)1 synchronous reversible motor, 220/380V 50Hz, 1500rpm 0.75kW(13)1 single phase asynchronous motor, with auxiliary pole, with starting condenser, cage rotor, 230V/50Hz, 1500rpm, 0.75kW(14)1 universal single phase motor, powered by DC and AC 230V 50Hz, 1500 rpm, 0.75kW(15)1 set of connection wires with different lengthsMachines must have the same shaft height, with didactic connection boxes having synoptic with connection schema.(16)1 brake to simulate mechanic loads, adequate speed and power for the motors, the brake allows to calculate the couple by 1 method.(17)1 board for parallel mounting of a 3ph alternator with the industrial network. The board is equipped by safety sockets and a inverter to verify frequency and voltage equality (alternator side and network side), equipped by light indicator, to verify phases correspondence and a switch to latch in case of all confirmed conditions
(18)1 digital measuring module of electrical parameters, DC and AC current and voltage, single and 3ph power, the module must be protected against overload and allow to reset values to zero(19)1 digital tachymeter up to 10000 rpm provided with connection cables, allows to measure speed by contact or without contact using sensor(20)1 set of couplings with protection accessories(21)2 frame for easy mounting of the machines. Each frame allow to install two machines, and should be equipped by vibration proof rubber supports Power supply box, AC 1ph & 3ph and DC outputs:- 01 output variable DC 0 to 230V / 10A min, with security socket and protected by circuit breaker- 01 output variable DC 0 to 230V / 1A for rotor excitation, protected by circuit breaker- 01 output variable AC 3ph, with protected sockets, 0 to 430V + N / 5A protected by circuit breaker- 01 output constant AC 3ph, with protected sockets, 400V + N / 10A protected by circuit breaker- 04 outputs at least on single phase sockets 230V + Ground, 16A protected by circuit breakerThe box must be protected by a differential circuit breaker with high sensibility, emergency push button and key switch. It should be also protected against DC motor run-away by general cut-off, a synoptic in front illustrate the cabling drawing and light indicators which indicate voltage presence
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We have other laboratory as below
Electrical laboratory equipment,such as
PLC training workbench,
transformer training workbench,
AC machine training equipment,
DC motor trainer kit Mechatronics training equipment, such as
mechatronics training system modular product system 9 stations, robot arm trainer,
PLC electro pneumatic trainer,
electro hydraulic trainerThermal lab equipmentRefrigeration and air conditioning training equipment PCB lab equipment
Food Machine Trainer
Address:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Office Supplies
Management System Certification:
ISO 9001
Company Introduction:
Jinan Minrry Technology Equipment Co., Ltd. Established in 2009, is a factory of manufacture educational equipment, vocational training equipment, didactic equipment. Minrry is Shandong Provincial High Tech and Innovation company, with self develop and research engineers team, with self owned 5000 square meters factory.
Past ISO9001, IS14001, OHSAS18001 certificats.
Minrry products exports for more than 100 countries.
Our product ranges are as belows:
Electrical training equipment
Mechatronics training equipment
Fluid lab equipment
Thermal training equipment
Refrigeration training equipment
PCB lab equipment
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishment of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with anirresistible force.