General Description
Blueflo™ DLPP-D Series Melt Blown High Flow Filter Cartridge is a high flow PP melt blown filter cartridge without core. It is fusing and intertwined of polypropylene resin without any chemical glues.The cartridges are glued at random to form 3D micro pore which will make the cartridge 3 layers with fine fibers in surface and coarse fibers and deep filtration.Large diameter extend to very high filtration surface area and high flow rate.This insures to reduce the number of filter cartridges and dimension of housing required. The long service life and high flow rate result in low investment and less manpower in many applications.
Features
Three layers structure cartridge offers high dirt holding capacity,longer service life
Formed by thermal bond without using any binders and adhesives
100% Pure Polypropylene will not cause any pollution to water
Wide Chemical compatibility
Large diameter extend to very high filtration surface area and high flow rate
FDA compliance material
Specifications
| Removal ratings |
1um,3um,5um,10um,25um,50um,75um,100um,150um, |
| Length |
9.75'',9.87'',10'', 20'', 30'', 40'' |
| Outside diameter |
152mm,155mm |
| Maximum operating temperature |
65°C |
| Maximum operating differential pressure (reverse direction) |
2.0bar@ 21ºC |
Applications
Pharmaceutics
Food and beverage
Drinking water
Chemical
Plating
Microelectronics
RO security filtration
Order Information
For example:
DLPP-A-5-10-D
Outer diameter:152mm,inner diameter:112mm,5um,10'' length
Audited Supplier 
){kind=link}
){kind=link}