| Conditions of Use: |
Marine, Land Use, Gas Engine |
|---|---|
| Usage: | Emergency Crew, Standby Unit, Common Units |
| Output Type: | DC |
| Cooling Method: |
Water Cooling |
| Installation Method: |
Fixed |
| Generator Type: |
Diesel Generator |
| Samples: |
|---|
Suppliers with verified business licenses
Audited Supplier PRODUCT INTRODUCTION
DC20D MKII is one module used for Diesel/gasoline Engine or Generator, It's an upgraded product of DC20D.It is with the functions of Auto Star/Stop, Protection and Alarm indication. DC Power and Running situation is indicated on the front panel.
The status of the engine and generator can be checked conveniently because these parameters of over speed, under speed, Over Frequency, Low Frequency, Over Voltage, Under Voltage, Low Oil Pressure, High Temperature, Low Water Level, Low Oil Level, Charge Failure, Over-time Stop, Emergency Stop Alarm System as well as Low Battery Voltage can be indicated in time.
The output connector is connected with traditional relay which can burden more output current. The parameters can also be set by the front face buttons so that it can be used in different kinds of situations.
TECHNICAL SPECIFICATIONS
| Power Consumption: MAX 3W. |
| Measuring Frequency:10~70 Hz. |
| AC input: AC 50~380 V. |
| Current measurement range:0-2000A. |
| Speed sensor Frequency:30-9999Hz |
| Relay output: |
| Fuel Output: MAX 5A. |
| Start Output: MAX 5A. |
| Configurable output1:MAX 2.5A. |
| Configurable output2:MAX 2.5A. |
| Excitation output: MAX 1A. |
| Size:78mm * 78mm * 55mm. |
| Panel cut-out:67mm * 67mm. |
| Protection Level:IP65 when waterproof rubber gasket is added between controller and its panel. |
| Operation Temperature :-30ºC~70ºC. |
| Storage Condition:-40ºC~85ºC. |
| Insulation strength:Apply AC2.2kV voltage between high voltage terminal and low voltage terminal; The leakage current is not more than 3mA within 1min. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}