Manufacturer Supply IGBT Induction Hot Forging Equipment with Automatic Pusher to Copper, Iron Bar

Manufacturer Supply  IGBT Induction Hot Forging equipment with Automatic Pusher to copper, iron bar

Induction Hot Forging Machine with Forging furnace :
   Induction heating for diathermy (hot forging)has the characteristics of high efficiency, fastgood controllability, automation, safe operation, easy to  realize the factory production line operation and so on.Because the application of diathermy generally requires the equipment to operate continuously
under the condition of high power output, the comprehensive efficiency, reliability, service life and maintenance cost of the equipment are very important. induction heating generator is a highly efficient and energy-saving product, and the efficiency of the diathermy product is higher than 96%. Power factor is not less than 0.9, which is especially beneficial to reduce the distribution transformer capacity.With a design life of more than 15 years, high comprehensive reliability and low maintenance cost, it is an ideal induction heating generator for diathermy.
As people in the pursuit of high quality products as well as increasing costs of social and human, and often requires modern diathermy equipment automation operation and reduce the human input. These require that the induction heating generator has the function of automatic temperature control and the interface controlled by PLC or upper computer, and solves the problem of measuring and controlling the temperature of metronome feeding and feeding materials as well as the control of the initial state, pause state and end state of operation. Our products has found suitable solutions to these problems.

Main Fetures:
1. Using the Cylinder to push th workpiece size, auto-Matic Feeding system, improve the produce speed and produce efficiency.
2. Infineon IGBT module and Inverting technologies of third generation been used; Higher reliability and lower maintenance cost.
3. 100% Duty cycle, continuous working is allowed at maximum power output.
4. Simple to install, Installation can be done by unprofessional person very easily;
5. High Efficiency Up to 98%.
6. Energy Saving Up to 20-30% compare with SCR machine.
7. Diode Rectification Technology Make sure high power factory-0.98.
8. Soft Switch Technology And prefect Protection system( Over Heat, Over Current, Under Voltage, Over Voltage, Phase Fail, Lack Water) enhance Good Reliability.
9. Display of heating power, Power%, Current, Voltage, oscillating frequency.
10. Light weight, small Size
11. Water Pressure and Water Temperature meter in the machine, easy to check the water pressure and water temperature for the working!
 
Technical Parameter

 
Application:
Heating (hot forging, hot fitting and smelting):
1.Hot forging aims to fabricate the work pieces of certain temperature (different materials require different temperatures) into other shapes through forging press with the help of punch press, forging machine or other equipments, for instances, hot extrusion of watch case, watch flan, handle, mold accessory, kitchen and table ware, art ware, standard part, fastener, fabricated mechanical part, bronze lock, rivet, steel pin and pin.
2. Hot fitting refers to the connection of different metals or metals with nonmetals through the heating based on the principle of hot expansion or hot smelting, for instances, embedded welding of copper core of computer radiator with aluminum sheet and speaker web, compound of steel and plastic tube, sealing of aluminum foil (tooth paste peel), motor rotor and sealing of tubular electric heating element.
3. Smelting mainly aims to melt the metal into liquid by using the high temperature, which is mainly applicable to the smelting of iron, steel, copper, aluminum, zinc as well as various noble metals.
 
Advantage
1. Using the third generation Infineon IGBT, Can save 20-30% electricity compare SCR parallel type
and Lamp Vacuum Tube type. Small size compare with Lamp Vacuum Tube
Induction Heating Mahine.
2. DELIXI Air Switch
3. All screws in our machine are stainless steel.
4. Phase Bridge (Germany IXYS)
5. Water Temperature and water Pressure meter in the machine,double protection for the machine.

After-sale service:
1. Warranty time: Within 18 months from the date of delivering, 12months from date of receiving.
2. Within warranty all parts are free for customer, any fault caused by non artificial reason, any quality problems such as design,
manufacture, or procedure occurs, We shall provide replacement parts after detecting the faults.
3. If any big quality problems occurs out of the guarantee period, we will send maintenance
technician to provide visiting service after checking with the customer and charge for a favorable price.
5. We will provide a lifetime cost price to the buyer with the materials and spare parts used in system operation, equipment
maintenance.
6. The above mentioned are only basic aftersale service requirements,we will make more promises related to quality assurance and operation guarantee