Type: | Alloy Steel Bar |
---|---|
Standard: | AISI, ASTM, GB, JIS, DIN, BS |
Technique: | Hot Rolled |
Application: | Structural Steel Bar, Tool Steel Bar, Die Steel Bar |
Surface Treatment: | Black/Peeling/Polishing/Machining/Grinding/Turning |
Alloy: | Alloy |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
High strength, good elasticity, low cold deformation plasticity, medium machinability, poor weldability, no temper brittleness, low hardenability, easy to produce cracks during water quenching. It is usually used after normalizing, tempering after quenching, or high-frequency induction quenching. Used as mechanical parts with high wear resistance requirements and small dynamic load and impact effects, such as forged gears, pull rods, rollers, shaft friction discs, machine tool spindles, engine crankshafts, agricultural machinery plowshares, heavy load mandrels, etc., as well as less important damping springs, spring washers, etc
Unified number
Code |
Brand
|
Chemical composition (mass fraction) (%)
|
|||||
C
|
Si
|
Mn
|
Cr
|
Ni
|
Cu
|
||
≤
|
|||||||
U20080
|
08F
|
O.05~O.11
|
≤0.03
|
0.25~0.50
|
0.10
|
O.30
|
0.25
|
U20l00
|
10F
|
O.07~O.13
|
≤O.07
|
O.25~O.50
|
O.15
|
0.30
|
0.25
|
U20150
|
15F
|
0.12~O.18
|
≤O.07
|
0.25~O.50
|
0.25
|
0.30
|
0.25
|
U20082
|
08
|
0.05~O.11
|
O.17~O.37
|
O.35~O.65
|
O.10
|
O.30
|
O.25
|
U20102
|
lO
|
0.07~O.13
|
0.17~O.37
|
0.35~0.65
|
0.15
|
O.30
|
O.25
|
U20152
|
15
|
O.12~0.18
|
0.17~O.37
|
O.35~0.65
|
O.25
|
O.30
|
O.25
|
U20202
|
20
|
O.17~0.23
|
0.17~0.37
|
0.35~0.65
|
O.25
|
O.30
|
O.25
|
U20252
|
25
|
O.22~0.29
|
0.17~O.37
|
O.50~O.80
|
O.25
|
O.30
|
0.25
|
U20302
|
30
|
O.27~O.34
|
O.17~O.37
|
O.50~O.80
|
0.25
|
O.30
|
0.25
|
U20352
|
35
|
O.32~0.39
|
O.17~O.37
|
O.50~O.B0
|
0.25
|
O.30
|
0.25
|
U20402
|
40
|
0.37~O.44
|
0.17~O.37
|
O.50~O.80
|
O.25
|
O.30
|
O.25
|
U20452
|
45
|
O.42_O.50
|
O.17~O.37
|
0.50~0.80
|
0.25
|
O.30
|
0.25
|
U20502
|
50
|
0.47~0.55
|
0.17~O.37
|
0.50~0.80
|
0.25
|
O.30
|
O.25
|
U20552
|
55
|
O.52~0.60
|
O.17~O.37
|
O.50~0.80
|
O.25
|
0.30
|
O.25
|
U20602
|
60
|
0.57~O.65
|
0.17~O.37
|
0.50~O.80
|
O.25
|
O.30
|
0.25
|
U20652
|
65
|
O.62~0.70
|
0.17~0.37
|
O.50~O.80
|
O.25
|
O.30
|
O.25
|
U20702
|
70
|
O.67~0.75
|
0.17~0.37
|
O.50~O.80
|
0.25
|
O.30
|
O.25
|
U20752
|
75
|
O.72~0.80
|
0.17~O.37
|
0.50~0.80
|
0.25
|
O.30
|
O.25
|
U20802
|
80
|
O.77~0.85
|
O.17~0.37
|
O.50~O.80
|
0.25
|
O.30
|
0.25
|
U20852
|
85
|
O.82~0.90
|
O.17~0.37
|
0.50~O.80
|
O.25
|
O.30
|
O.25
|
GB
|
ISC
|
ASTM/AISI
|
UNS
|
DIN EN/DIN
|
W-Nr.
|
NF EN/NF
|
GOST
|
BS EN/BS
|
50
|
U20502
|
1050
|
G10500
|
C50E Ck53 |
1.1210
|
C50E
|
50
|
C50E 080M50 |
Material Science: | Hot rolled/cold drawn/forged steel round steel |
Process: | It is forged from vacuum degassed steel ingot. |
Diameter: | 25mm - 1000mm (optional) |
Length: | 1000mm-12000mm Straightness:3mm/M max(optional) |
Process: | EAF+LF+VD+forging+heat treatment (optional) |
Delivery conditions: | Hot forging+rough machining (black surface after Q/T)+double tempering. |
Delivery time | 15-25 days |
Minimum order quantity: | 5 tons |
Heat treatment: | Normalizing/annealing/quenching/tempering (optional) |
Technical data: | Chemical composition, physical properties and mechanical tests according to customer requirements |
characteristic: | According to your requirements |
Test: | Ultrasonic test according to SEP 1921-84 C/c and D/d (optional) |
Tag: | Grade, heat resistant NO The length will be printed with the required color on each bar |
Payment: | T T 30% in advance; The balance shall be paid against shipping documents or irrevocable letter of credit at sight before shipment |
Terms of trade | FOB,C&F,EXW... |
Brand | Sample blank size/mm | mechanical property | Hardness of steel delivered HBSl0 / 300 ≤ | |||||
Normalizing/quenching/ tempering | ób/MPa | ós/MPa | δ5(%) | Ψ(%) | AKu2/J | |||
≥ | Unheat-treated steel | Annealed steel | ||||||
1010 | 25 | 930-/-/ | 315 | 185 | 33 | 55 | 137 | |
1020 | 25 | 910/-/- | 4lO | 245 | 25 | 55 | 156 | |
1025 | 25 | 900/870/600 | 450 | 275 | 23 | 50 | 170 | |
1030 | 25 | 880/860/600 | 490 | 295 | 21 | 50 | 179 | |
1035 | 25 | 870/850/850 | 530 | 315 | 20 | 45 | 197 | |
1040 | 25 | 860/840/60D | 570 | 335 | 19 | 45 | 217 | 187 |
1045 | 25 | 850/840/600 | 600 | 355 | 16 | 40 | 229 | 197 |
1050 | 25 | 830/830/600 | 630 | 375 | 14 | 40 | 24l | 207 |
1055 | 25 | 820/820/600 | 645 | 380 | 13 | 35 | 255 | 217 |
1060 | 25 | 810/-/- | 675 | 400 | 12 | 35 | 255 | 229 |
1065 | 25 | 810/-/- | 695 | 410 | lO | 30 | 255 | 229 |
Main features | Application examples | |
50 | High strength medium carbon structural steel has low cold deformation ability and medium machinability. Poor weldability, no temper brittleness, low hardenability, easy to crack during water quenching. Use status: normalizing, tempering after quenching, high-frequency surface quenching, applicable to mechanical parts with high wear resistance under the condition of small dynamic load and impact | Forged gears, pull rods, rollers, shaft friction discs, machine tool spindles, engine crankshafts, agricultural machinery ploughshares, heavy load mandrels and various shaft parts, as well as minor damping springs, spring washers, etc |
55 | It has high strength and hardness, poor plasticity and toughness, medium machinability, poor weldability, poor hardenability, and easy to crack when water quenched. It is mostly used after normalizing or tempering treatment, and is suitable for manufacturing high-strength, high-elastic and high-wear parts | Gear, connecting rod, wheel rim, rim, locomotive wheel rim, flat spring, hot rolling roller, etc |
60 | It has high strength, high hardness and high elasticity. During cold deformation, the plasticity is poor, the machinability is medium, the weldability is poor, the hardenability is poor, and the water quenching is easy to crack; Therefore, large parts shall be normalized. | Roll, shaft, wheel rim, spring coil, damping spring, clutch, wire rope |
1. Who are we?
Our headquarter is located in Shandong, China. Since 2022, we have sold to North America (60.00%), Western Europe (14.00%) and South America (6.00%). There are about 11-50 people in our office.
2. How do we guarantee quality?
Always provide pre-production samples before mass production;
Always carry out final inspection before shipment;
3. What can you buy from us?
Copper, aluminum, die steel, titanium, customized machine parts
4. Why should you buy from us instead of other suppliers?
The company has 25 years of production experience. It has advanced precision production equipment, modern large warehouse, 200000 tons of inventory goods and a number of long-term stable cooperative customers.
5. What services can we provide?
Accepted delivery conditions: FOB, CFR, CIF, EXW
Accepted payment currency: US dollar, Euro, Japanese yen, Canadian dollar, Australian dollar, Hong Kong dollar, British pound, RMB, Swiss franc;
Accepted payment type: T/T, L/C, D/P D/A, PayPal;
Optional ports: Tianjin, Shanghai, Guangzhou;
Spoken: English, Chinese
6. How can we get your price?
A. We need the following information to quote for you:
1). Product Name
2). standard
3). Material grade (chemical composition)
4). dimension
5). amount
6). Special part drawing
Suppliers with verified business licenses