| After-sales Service: | 12 Months |
|---|---|
| Principle: | Magnetic Sensors |
| Range: | 200~6000mm |
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Magnetic Float Ball Level Sensor for Liquid Level Interface Measurement
Magnetic Float Ball Level Sensor for Liquid Level & Interface Measurement consists of reed, precise resistance and amplification transformation circuit and adopt imported advanced sensor components and signal transmitters. When the magnetic line of the magnetic float ball reaches a certain place of the level sensor, the reed closes, and the float ball changes with the height of level interface. The amplification transformation circuit converts the change of the interface height into linear 4~20mADC signal to realize the measurement and transmission of the level location signal.
Product Installation
Product Features
1. Simple structure, good stability and reliability.
2. Independent of the medium's physical and chemical states such as conductivity, dielectric constants, foam etc.
3. Applicable for all kinds of medium environments such as corrosive, toxic and explosive one.
4. Interface measurement or level measurement of 2 kinds of medium with different densities.
5. Two-wire 4~20mADC signal output, 0.8'' or 0.56" LED digital display.
6. Explosion-proof structure design for exploding environment
Product Parameters
| Measuring range | 200~4000mm(>4M customize) |
| Resolution factor | 10mm,5mm,20mm |
| singal output |
4~20mA(two-line) 2000/m(1/2",3/8") |
| Loading resistance | 500Ω |
| Transmitting | >1000m |
| Working power supply | 16~30VDC |
| Density | ≥0.5g/cm3 |
| Pressure | PN2.5~PN160(×0.1MPa)(Max pressure PN320) |
| Operating temperature | -40 ~ 80 °C, ≤120 °C, ≤150 °C |
| Float ball diameter | Φ30~Φ120(depending on pressure and density) |
| Flange installation | DN40~DN150/RF/PL(HG/T20592~2009) customize
2'' thread(downward install) 1/2'' thread (upward install, resistance signaloutput) 3/8'' thread(upward install, resistance signal output) |
| Installation angle | ≤±25° |
| Electrical connection |
M20×1.5 female thread Three-lines screening cable |
| IP grade | IP65 |
| Explosion-proof grade | Exia II CT6Ga,EXd IICT6Gb |
Product Application
Our Services
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}