| After-sales Service: | Available |
|---|---|
| Warranty: | 12months |
| Type: | Electrostatic Spraying Equipment |
| Samples: |
price is subject to final communication.
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Introduction of the powder coating spray technology
Powder coating is a type of coating that is applied as a free-flowing, dry powder. The main difference between a conventional liquid paint and a powder coating is that the powder coating does not require a solvent to keep the binder and filler parts in a liquid suspension form. The coating is typically applied electrostatically and is then cured under heat to allow it to flow and form a "skin". The powder may be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is tougher than conventional paint. Powder coating is mainly used for coating of metals, such as household appliances, aluminum extrusions, drum hardware and automobile and bicycle parts.This open-type powder coat spray booth can be used in a manual coating line, and can also be used in an automatic coating line.
The low-noise open-type powder coat spray booth can deal with both small and bigger metal parts coatings.
If you want to put the booth anywhere you want without considering the position of the vent hole in the wall;
If you want to have a low-noise booth to avoid deafening noise;
If you want to have an elegant booth to make your plant looks more orderly and beautiful;
If you don't want to waster powder;
If you ask for less electricity bill;
If you expect your powder spray booth to be durable, such as living for over 20 years; You should try this indoor exhausting powder coat spray booth.
Advantages:
(1) Direct exhaust clean air indoors, so no limits for installation place;
(2) Low power, low noise, and big air volume to keep powder inside the booth for recycle
(3) Easy to install, save time and labor
a. There are lifting ears at both ends for easy hoisting
b. There are holes for screw and positioning, which is convenient for installation
c. There is a label on the top of the fan motor to indicate the direction of the fan to prevent customer wiring errors
(4) Made of high-quality booth material, SECC panels with high glossy outdoor powder coated surface, which won't rust, won't fade and can be used for over 20 years
Quick Specification of the Manual Powder Spray Booth with Filter Cartridge Powder Recovery System
| platform Size | 2200mm long *1200mm wide |
| Material | galvanized steel, with powder coated |
| Filter cartridge | 3pieces |
| Exhaust fan | 1set |
| powder recovery system | HY-FRC3U2.2 |
| Control box | 1set, English panel |
| Standard Voltage | 380V/3f@50Hz, 220V/1f@50Hz |
| Remarks | size and voltage could be as required. |
Picture of the Manual Powder Spray Booth with Filter Cartridge Powder Recovery System
Production area and equipment for Manual Powder Spray Booth with Filter Cartridge Powder Recovery System
Package Show of Manual Powder Spray Booth with Filter Cartridge Powder Recovery System
Our Team is serving you at any time
Send us inquiry for more info about Manual Powder Spray Booth with Filter Cartridge Powder Recovery System
Contact person: Lisa Lee
Wish the best to your family!
FAQ
Q 1: Where are your factory and company?
A: We are located at Mingji Industrial Zone, Zouping City, Shandong Province, China.
Welcome to have a visit.
Q 2: How do you control your quality?
A: Our factory is ISO and SGS, BV certified. We have our own QA and QC team.
They will check finished products on the site to ensure all details to meet our highest standard and the customer's requirements.
Q 3: What is your terms of delivery?
A: Normally our quotation is under FOB Qingdao, CFR, but we also accept EXW, FOB(other seaports), CFR, CIF, DDU and so on.
Q 4: What is your terms of payment?
A: By T/T, 50% as deposit for production, and 50% balance before delivery. We'll show you the photos of the products and packages before you pay the balance. Other payment terms are as negotiated. For small amount order, we also accept WU, Paypal, MoneyGram and ONLINE orders payment and so on.
Q 5: What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton, and wooden box as required.
Q 6: How about your delivery time?
A: Generally, the goods will be ready within 7 to 10 days after receiving deposit for standard goods. Some kinds are even in stock. If your voltage is different from 380V/3PH/50Hz, the delivery time will be a little longer for custom-made motors or electric components.
Q 7: Can you produce according to the technical drawings?
A: Yes, we can produce by your technical drawings or requirements. We also can make drawings for you.
Q 8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit;
A2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Q 9: How about the quality of the products?
A:With the advanced machines, strong and professional R&D team and material sources, our products are excellent in performance and craftsmanship.
Why Choose Us
1.More than 10-year manufacturing experience involved in this industry, and 10-year rich export experience
2.Superb unique technology and Automatic production line.
3.Large order can be placed.
4.Advanced equipment and exquisite workmanship.
5.Durable and reliable
6.Professional pre-sales and after-sales service
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}