Loctite Frekote Wolo Chemical Auxiliary for Polyester Resins

LOCTITE FREKOTE WOLO

Product  Description
LOCTITE FREKOTE WOLO-HL is a solventbased polymer release agent with a unique high slip formulation that cures quickly and provides multiple releases for low Voc polyester gel-coat and other tough releasing polyester structures. Application and use of this release agent. utilizing the wipe-on-leave-on technique produces a high gloss finish with no need to polish.

GENERAL INFORMATION
This product is not recommended for use in pure oxvaen andlor oxvoen rich svstems and should not be selected as a sealant for chlorine or other strong oxidizing materials.For safe handling information on this product, consult theSafety Data Sheet (SDS).

Directions for use:
1. Apply LOCTITE FREKOTE WOLO-HLTM with a clean lint free, cotton wiping cloth. Wet the cloth with LOCTITE FREKOTE WOLO-HLTM until it is damp but not dripping.
2. Wipe a smooth, wet film over the entire mold surface. Be sure to avoid drips and puddles. Allow the product to evaporate. For larger molds, apply LOCTITEFREKOTE WOLO-HLTM to the surface one section at a time, being sure not to miss any areas.
3. Allow a minimum of 15 minutes before applying next coat. Apply a minimum of four coats in this manner. Dampen cloth lightly as needed.
4. Allow the final coat to cure for 30 minutes at 20°C.
5. NOTE: If the cloth dries out during your coating process use a fresh clean cloth to apply the next coat. This prevents resin accumulation on the cloth from being deposited on the mold surface. If streaking occurs. replace the cloth with a clean dry one and/or make sure that the cloth is just damp and not soaking wet. Avoid over-application, as this will cause streaking on the tooling surface. Streaks or wipe lines can be removed easily by wiping the mold surface lightly with a dry cloth. Product is moisture sensitive, keep container tightly closed when no in use.
6. NOTE: For maximum number of releases, apply a touch up coat after the first 2-3 parts are released as a break in period after the initial application. On deep or high wear areas, apply an extra 1-2 coats of LOCTITE FREKOTE WOLO-HLTM. This will help increase the slip even further in these high drag areas.

Storage
The product is classified as flammable and must be stored in an appropriate manner in compliance with relevant regulations. Do not store near oxidizing agents or combustible materials. Store product in the unopened container in a dry location. Storage information may also be indicated on the product container labelling.Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28°C can adversely affect product properties.Material removed from containers mav be contaminated during use. Do not return product to the original container. Henkel cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representive.

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
 

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.