HT9010 Lightning protection standard resistor
I. Product Introduction
HT9010 standard resistor consists of 9 1/2W high-precision military-grade wirewound resistor series to form a four-wire standard resistor. Direct shifting does not need to change the line. It is convenient to carry and replace the traditional BZ3 and other single resistors to carry the problem of inconvenient switching of different resistors. The highest accuracy is 0.05%. It is a standard resistor specially customized by us. Its resistance value includes 1mΩ, 10mΩ, 100mΩ, 1Ω, 10Ω, 100Ω, 1KΩ, 10KΩ, 100KΩ.Fully meet the range of 10-3~105 as stipulated in Order 31 of the Lightning Protection Device Inspection Qualification Management Measures. It is mainly used for the calibration of grounding resistance tester, equipotential tester and other instruments.
II. Technical Specification
Function |
Used for the calibration of instruments such as grounding resistance tester and equipotential tester |
Range |
1mΩ,10mΩ,100mΩ,1Ω,10Ω,100Ω,1KΩ,10KΩ,100KΩ |
Accuracy |
0.05% |
Wiring method |
Four-wire method |
capacity factor |
1/2W |
Coefficient |
±25ppm |
Size |
L/W/T:187*119*48mm |
Test line length |
Red 0.5m,black 0.5m each 2PCS |
Weight |
550g |
Working temperature and humidity |
-10ºC~40ºC;below 70%rh |
Storage temperature and humidity |
-20ºC~60ºC;below 80%rh |
Insulation resistance |
More than 10MΩ(Between circuit and case500V) |
Pressure resistance |
AC 3700V/rms(Between circuit and case) |
Suitable for Safety Regulations |
IEC61010-1, CAT III 600V, Pollution Degree 2, JJG724-1991 "Direct Current Digital Ohmmeter Verification Procedure", JJG166-1993 "Direct Current Resistor Verification Regulation" |
III. Accessories
Instrument bag |
1PC |
Standard resistor |
1PC |
Test line |
4PCS(red, black each 2PCS) |
Manual, certificate |
1SET |