LST1 Ramera depositor
LST1 is a conical mud bucket depositor with simple structure and no energy consumption.
Cons: The device is highly high. Often in order to meet the transport requirements, do composition combination, by the upper and
lower 2 sections of the removable part.
LST2 Ramera precipitator
LST2 is a mechanical scraper-type sedimentator, which greatly reduces the height of the equipment, discharges the mud smoothly, and has the advantage of significant large-scale sedimentation.
Product DescriptionThe central drive mud scraper is applicable to the sludge scraping and discharging of the radial flow (circular) sedimentation tank with a diameter generally not greater than 18m in the water plant or sewage treatment plant in the water supply and drainage project. The central drive mud scraper is mainly composed of driving device, main shaft, handrail, steel beam, vertical grid bar,support, mud scraper, overflow weir plate, pull rod, small scraper, underwater bearing, flow stabilizer, electric control box and other components.
Product details
Process principles and theories
The Ramera sedimentator is an efficient solid-liquid separation device that obtains multiple effective precipitation area by setting a number of sheets in the precipitation separation zone and obtaining multiple effective precipitation area on the unit floor area. The Ramera precipitation system is based on the 20th century by Professor Hazhen of Germany
It is suggested that the precipitation capacity is related to the area of the sedimentation pond and has nothing to do with the precipitation depth. The precipitation area of Ramera is the accumulation plus of the bevel projection surface.
Working principleThe sewage flows into the diversion drum from the inlet pipe for diffusion, and then flows out to the surrounding evenly in a radial direction. The suspended sludge is deposited at the bottom of the tank after sedimentation. The driving device drives the center stand to rotate, and drives the scraper arm and scraper to rotate. After the sludge around the tank is scraped to the central sludge collection tank, it is discharged from the sludge discharge pipe outside the tank by static pressure inside the tank. The water surface scum is skimmed to the side of the tank by the skimming device, and then it is scraped into the slag bucket by the slag scraper and discharged outside the tank; The supernatant overflows to the outlet tank through the triangular outlet weir plate, and then discharges.
Product advantages
1. Efficient, less land:
slant plate lengthened to 1.5 meters, high separation efficiency, higher than conventional oblique oblique pipe efficiency of 1.5 to 2.0 times higher, with the conventional amplitude
Streaming and vertical-flow depositors can save up to 80% of the floor space.
2. Good hydraulic conditions:
no hydraulic dead ends and vortex, precipitation effect is better.
3. The slant plate is not blocked:
The slope of the bevel plate is 60 degrees, 80 to 100mm, and the anti-cleaning device is provided.
4. Rugged:
the bevel plate does not break, does not collapse, the use of 6mm hard PVC board or 8mm
High-quality PP board specially made into separate sheet, module embedded installation, high strength and easy to disassemble and maintain.
5. Smooth drainage:
The sedimentation pool designed by Zhongshen has no dead ends, and the mud drainage is recommended to be pumped out of the mud.
Application
This center drive mud scraper can be widely used in sewage treatment project of city, chemical industry, textile, gold treatment and other industries. Its structure is reasonable, high efficiency, convenient operation and maintenance, is a kind of more ideal sewage treatment project supporting facilities!
| Model |
LST2-010 |
Process customization |
Yes |
Types of sedimentary ponds |
Slant deposition pool |
| Single pool of water processing |
0~10(m3/h) |
Settling time |
30~40(min) |
Effective area |
customize(m2) |
| The size of the inlet |
200(mm) |
the diameter of the drain pipe |
200(mm) |
The concentration of water suspension |
customize(mg/L) |
| The concentration of water suspension |
Ask customer service(mg/L) |
The slope of the bevel plate |
60 |
Mud-containing drainage rate
|
customize |
| The flow rate inside the board |
Ask customer service(mm/S) |
Material |
Carbon steel/stainless steel |
Single pool self-weight |
customize(k |
Audited Supplier 
){kind=link}
){kind=link}