| After-sales Service: | Support |
|---|---|
| Warranty: | Support |
| Type: | Horizontal Lathe |
| Processing Accessory: | Centre CNC Lathe |
| Guide Rail: | Horizontal Guide Rail |
| Tool Holder: | Single-tool Holder CNC Lathe |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
| I t e m s | Unit | 6150B | 6266B | 6150L | 6166L | 6176L |
| Swing over bed | mm | 500 | 660 | 500 | 660 | 760 |
| Swing over cross slide | mm | 300 | 430 | 300 | 430 | 530 |
| Distance between centers | mm | 1000,1500,2000,3000 | ||||
| Swing in gap | mm | 710 | 870 | 710 | 870 | 970 |
| Width of gap | mm | 240 | 240 | 240 | 240 | 240 |
| Width of bed | mm | 390 | ||||
| Spindle nose | D8 | |||||
| Spindle bore diameter | mm | 82 | 105 | |||
| Morse taper of spindle center | M6 | 1:20 | ||||
| Spindle speed | rpm | 9-1600(24 steps) | 6-1120(24 steps) | |||
| Max output torque of spindle | NM | 1500 | ||||
| Range oflongitudinalfeed | mm/re | 0.028-6.43 | 0.063-6.43 (0.0025-0.25in/rev) | |||
| Range of cross feed | mm/rev | 0.012-2.73 | 0.027-2.73 (0.00106-0.107in/rev) | |||
| Lead screw pitch | 12mm( metric system)/2tpi. ( inch system) | |||||
| Metric threads | mm | 0.5-224(48 kinds) | 1-224(46 kinds) | |||
| Inch system threads | t.p.i | 72-1/8(46 kinds) | 28-1/8(42 kinds) | |||
| Module threads | 0.5-112mm(42kinds) | |||||
| Diameter pitch threads | 56-1/4DP(45 kinds) | |||||
| Cross slide travel | mm | 340 | 360 | 340 | 360 | |
| Top slide travel | mm | 150 | 200 | 150 | 200 | |
| Section specification of tool post | mm | 25×25 | ||||
| Longiudinalrapid traveling speed | m/min | 4.5(50HZ)/5.4(60HZ) | ||||
| ransversalrapid traveling speed | m/min | 1.9(50HZ)/2.3(60HZ) | ||||
| Morse taper of tallstock center | M5 | |||||
| Max travel of tallstock quill | mm | 150 | ||||
| Tailstock quill diameter | mm | 75 | ||||
| Main motor | kw | 7.5 | 11 | |||
| Rapid travel motor | 250W/1360rpm | |||||
| Coolant pump moto | 90W/25L/min | |||||
1. 250mm 3-jaw chuck for 50B, 50L series;0325mm 3-jaw chuck for 66B, 66L, 76L series
1. 630mm Face plate for 50 series
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}