| After-sales Service: | 6 Months |
|---|---|
| Warranty: | 6 Months |
| Certification: | ISO 9001:2008, CE |
| Customization: |
|---|
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier In order to recommend proper machine and make detailed technical proposal and exact offer for you as soon possible,could you please tell us the following technical parameters:
| 1 | What's the design pressure of your dryer cylinder ? |
| 2 | What's the face length of your dryer cylinder ? |
| 3 | What's the wall thickness of your dryer cylinder? |
| 4 | What's the diameter of your dryer cylinder ? |
| 5 | What's the working/ operation speed of your dryer cylinder ? |
Accept custom, only need to provide related parameters, we will design for you to make you satisfied with the machine.
Product Description
Cylinder dryer , heads and journals are made of special cast iron. Separate journals are bolted onto the dryer heads, Dryer shells are ground on the outside and turned on the inside, while all dryer journals with steam or condensate pipes have insulation sleeves. The inner surface have grooves for the stationary siphons, the front side ends of all dryers contain manholes.
The main parts of cylinder dryer include: shell,dryer bars,syphon, manhole cover, shell head, spherical roller bearing, steam joint ,etc.
The heat energy for paper drying comes from steam as it condenses inside the dryer cylinders. The type of heat is referred to as latent heat.Steam always condenses at the saturation temperature as defined by the pressure in the system,steam is usually transported at a temperature considerably above the saturation level to prevent condensation within pipe lines.
Product Show
Technical Parameters
| Diameter | Design pressure MPa | Material | Hardness | Width | Shell Thickness | Poughness | Working speed |
|
1500 |
0.3-0.8 | HT250-300 | 190-240 |
350-10000 |
25-32 | 0.2-0.4 | 200-1200 |
| 1800 | 0.3-0.8 | HT250-300 | 190-240 | 350-10000 | 28-36 | 0.2-0.4 | 200-1200 |
| 2000 | 0.3-0.8 | HT250-300 | 190-240 | 1350-5000 | 30-40 | 0.2-0.4 | 200-1200 |
| 2500 | 0.3-0.8 | HT250-300 | 190-240 | 1350-5000 | 32-37 | 0.2-0.4 |
200-500 |
| 3000 | 0.3-0.8 | HT250-300 | 190-240 | 1350-5000 | 37-56 | 0.2-0.4 | 200-600 |
| 3660 | 0.3-0.8 | HT250-300 | 190-240 | 1350-5000 | 40-65 | 0.2-0.4 | 200-1200 |
| 3680 | 0.3-0.8 | HT250-300 | 190-240 | 1350-5000 | as required | 0.2-0.4 | 200-1200 |
| ≤1500 | 0.3-0.5 | HT250-300 | 190-240 | 1350-5000 | 18-27 | 0.2-0.4 | 200-1200 |
Hot sale
Cylinder mould
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}