Kggk-Hc High Voltage Switch Comprehensive Characteristic Tester Switch Dynamic Characteristic Meter

KGGK-HC High Voltage Switch Comprehensive Characteristic Tester Switch Dynamic Characteristic Meter

Product Introduction

KGGK-HC high voltage switch tester can be used for various voltage levels of vacuum, sulfur hexafluoride, less oil, more oil and other power system high voltage switch mechanical characteristics of the parameter test and measurement. The measurement data is stable, the connection is convenient, the operation is simple, it is a convenient tool for the maintenance test of high voltage switch.

KGGK-HC High Voltage Switch Comprehensive Characteristic Tester Switch Dynamic Characteristic Meter

Product Characteristics
1, the instrument can automatically identify the breaking and closing state, and according to the reference fracture state prompts the corresponding closing and parting operation.
2, independent 6 fracture, can detect and prompt the connection status of the fracture, convenient for users to check the connection.
3, the machine can store 100 groups of test results.
4, large screen LCD (320×240)LCD display, advanced gray screen, no reflection in the sun no black screen, graphic and Chinese menu operation tips, humanized menu interface, easy to operate.
5, the instrument has a powerful graphic analysis function, to achieve waveform and measurement processing data on the same screen display, so that the test process is more intuitive.
6, the machine has a delay protection function, the circuit breaker can automatically cut off the coil voltage after the action, a good protection of the circuit breaker and testing instruments.
7, this instrument can be electric closing test and manual closing test.
8, can carry out high and low voltage experiment, automatically find the opening or closing voltage.
9, reclosing test, can do the closing, closing, closing and other parameters measurement.

KGGK-HC High Voltage Switch Comprehensive Characteristic Tester Switch Dynamic Characteristic Meter

Product Parameters
1. Time measurement:
12 natural opening (closing) time
Different phases in the opening (closing) phase
Switching (closing) phase is different
Closing (opening) bounce time (number of bounces)
Test range: 0.01ms ~ 20s, resolution: 0.01ms, accuracy: 0.1%±2 words
2, closing resistance measurement:
3/6 natural opening (closing) time
Different phases in the opening (closing) phase
Switching (closing) phase is different
Closing (opening) bounce time (number of bounces)
Closing resistance input time
3, Measuring range: 30 ~ 10000Ω, resolution 0.1Ω, accuracy 1%
4, graphite contact measurement:
3/6 natural opening (closing) time
Different phases in the opening (closing) phase
Switching (closing) phase is different

5, speed measurement: just minutes (just) speed
Average speed for a specified period of time (stroke or Angle)
6, speed measurement range: 1mm sensor 0.01 ~ 25.00m/s,
0.1mm sensor 0.001 ~ 2.50m/s
0.5° Angle sensor 1 cycle / 0.5°
7, stroke measurement: moving contact stroke (stroke)
Contact stroke
Overshoot or reverse
Sensor: 50mm, resolution :0.1mm
360-wire sensor: 360, resolution :0.25
Optional sensor: 300mm, 1000mm, acceleration sensor
8, coil current measurement range: 0 ~ 40A, minimum resolution: 0.01A.
9, instrument power supply: AC 220V ± 10%; 50Hz ± 2%
10, DC power supply: output voltage: 10 ~ 260V continuous adjustable, output current: ≤ 20A(short time)
11, external trigger trigger voltage range: AC/DC10V ~ 300V, current: ≤ 120A(short time)

12, isolation switch measurement range:
(1) Voltage output: DC10 ~ 260 (adjustable);
(2) Power output time: 0.01-20 seconds (configurable);
(3) The maximum acquisition time of the fracture signal is 20 seconds;
(4) can measure the fracture closing, opening time, three-phase different periods, bounce time and number
13, host volume: 380×280×170mm
14, use environment: -10ºC~+50ºC
15, relative humidity: ≤90%