Introducing Keysight Power Meters and Sensors Reliable, high-performing solutions Every power meter and sensor from Keysight Technologies, Inc. consistently delivers great results. One specific application: One right solution Keysight offers a wide selection of power meters and sensors for practically all application needs- wireless communications, radar pulse measurements, component test and more. A sure investment for many years to come Code-compatibility between power meters reduces the need for re-coding. Not only that, all Keysight power meters are backward-compatible with most legacy power sensors. Global network support No matter where you are, Keysight is committed to giving you the 24-hour support you need regarding our products, applications, or services.
Power Meters And Power Sensors
EPM and EPM-P Series Power Meter
The EPM power meters provide CW and average power measurements. The EPM-P power meters provide peak, average, peak-to-average ratio, and time-gated power measurements.
-
Power Measurements You Can Rely On
The EPM and EPM-P series provide high-performance, programmable power meters for CW, average, and peak power measurements.
- EPM series: measure average power over a range of -70 to 44 dBm and over the frequency range 9 kHz to 110 GHz.
- EPM-P series: measure peak, average and time-gated power over a range of -65 to 20 dBm and up to 18 GHz using E932XA power sensors; provides complete pulse and statistical analysis with PC software via the GPIB or RS232.
- A BenchVue software license (BV0007B) is included with EPM series meters. BenchVue makes it simple to connect, control instruments, and automate test sequences.
characteristic & What's included:
| 20 Msamples per second sampling rate for reliable continuous |
single shot measurements on wide bandwidth signals |
- Time-gated and free run power measurements
|
- Free 'Analyzer Software' software for complete pulse and statistical analysis, software is located 'In the Library'
|
- Eight pre-defined wireless configurations (GSM, EDGE, NADC, iDEN, Bluetooth, IS-95 CDMA, W-CDMA and cdma2000)
|
The E4416A dual channel power meter provides peak, peak-to-average ratio, average power |
| time-gated measurements on TDMA and W-CDMA wireless formats and pulsed signals. |
E4416A Front panel input sensor and reference calibration connector, power sensor cable, |
E9288A length 5-ft (1.5m), and ANSI Z540-1-1994 Calibration |
){kind=link}
){kind=link}