Liaoyang, Liaoning, China
Member Since: 2008
|working frequency||1.rotary tablesize( diameter): 1400mm |
2. to set up 6 stations along the circumference of turntable,
it can work more than 3000 times a day on average.
(according to 8 hours per day to count)
|blue or grey for option, |
it also could be customized according to customer's requirements
|temperature control||1. internal type 2. 4KW stainless steel heating pipe; |
2. "FOTEK"LED to display 200ºC adjustable high precision
3. temperature detection adopts high insulation k- thermocouple,it's the pioneer in the same industry competitors, to solve the
the interference of high frequency on heating system is completely solved,
to reduce the failure rate of temperature controller.
|safety protection measure|
1. with emergency stop device, to set up in a conspicuous and accessible place, it could allow operators to stop all work and activities immediately in case of emergency, the configuration of operation control button accords with the principle of human engineering;
2. The power supply is equipped with wrong phase protection function.
The device cannot operate when the power supply is out of phase after startup. Other operations can only be carried out after correction.
3. The power supply is equipped with overload automatic protection function.
4. The whole circuit is provided with multistage overload,protection against electric shock.
|machine overall dimension|
(only for reference)
|machine general size: ≈ 2100mm×4300mm×1860mm(LxWxH)|
|1. with high frequency system, automatic rotary table system compact type |
compact split structure design of automatic rotary table system,
with small occupied area, convenient for daily operation and maintenance;
2. The upper and lower parts of therotary table are driven by cylinders;
3. The automatic rotary table is made of 10MM aluminum plate precisely
by water cutting;
4. The fore and after door sheet of our machine adopts door bracket structure, it could open freely, it's convenient for maintenance and repair.
5. The front and rear door plates of the machine adopt doorbracket structure, it could open freely, it's convenient for maintenance
6. The rotary table adopts SKD brand precision intermittent dividerfrom Taiwan, the accuracy of rotary table positioning can be guaranteed;
7. All the cylinders adopt Zhicheng brand cylinder from China;
8. High frequency C type machine head adopts A3, 25mm cold roll steel sheet;
9.The main machine frame adopts A3 steel plate and square tubesto make.
|power supply||380V, 50hz, 3 phases |
(it could also be customized according to the customer's requirements)
|input power capacity||MAX:20KVA|
|driving method||pneumatic type|
|air supply requirements||the air compressor is more than 5P, 0.4-0.6MPa|
|effective size of die table||upper die table: (L)300mmx(W)350mm.|
|driving air cylinder parameters||1. lifting stroke: 150~200mm adjustable; |
2. welding force: 0-700KG adjustable;
3. pushing rotary table cylinder stroke: 20mm.
|timing controller||1. high frequency delay time: 0-10 seconds (adjustable); |
2. welding time: 0-10 seconds (adjustable);
3. cooling time: 0-10 seconds (adjustable);
4. automatic delay time: 0-10 seconds (adjustable).
|high frequency technical parameters||1.operating frequency: 27.12MHZ, to meet relevant IECstandards; |
2. low energy consumption and high power military electronic tube;
3. maximum output power is 12KW;
4. Russian PL5557 high sensitivity spark protection circuit;
5. resistance adopts the pattern of overcurrent protection circuit.
|electric tube |
cooling and heat dissipation system
|with 370W high quality high speed centrifugal blower, average air output is 25m3/min, to ensure the continuous use of equipment and the service life of electronic tube.|