X-ray film processor (4 channels)
Full automatic NDT X-ray film processor SX430L is use for developing industry-use X-ray films. It can develop NDT roll films, too.
Film processor normal working condition:
1) surrounding temperature: 10~30C
2) relative humidity: <=80%
3) install in darkroom with in & out water way and no dust and ventilate equipment.
2. Film Specifications:
(1)standard film: Single piece(76x125~357x infinity)(mm)
(3'x 5'~14' x infinity)
(2)special sized film: Maximum width B max=357mm
Minimum length L min=125mm
(3)film variety: High-temperature film
3. Developing Parameter:
1) time for whole process: NDT 6 min ~limit, adjustable
NDT films best developing time 8 min
2) developing medical liquid temperature: 24~35 C, adjustable
3. Solution Capability: Developer tank 11 liters
Fixer tank 11 liters
4. Processing order: Developer-water-fixer-water-drying
5. Water Consumption: About 5 liters/min
6. Power Supply: AC220V, 50/60Hz
7. Input Power: 4KW
8. Outlook Size: Length x Width x Height, 1200 mm x 715 mm x 1250mm
9. Net Weight: 130Kgs
Product Characteristic:
Equipment Figure: New designed body and beautiful outlook. Taking films very expediently due films turn above.
Extra-Deep Tank Rolling Frame: Deep than wide is 3: 1, this design make films very distinct clear.
Special Film-Sending Principle: Sending films by special crossing way and no touch guide systems design, no risk of films jamming or scratch.
Anti-oxidization Performance: Sealed chemicals circulation systems reduce touch area for chemicals and air.
Critical Parts: The rollers' material can resist high-temperate and crystallization. No change shape and swell for using long time.
Circuit Control: Microprocessor controls heating, automatic check and touch films, replenishing chemicals.
Energy-Saving: Keep sleep situation when no films need process after a while. Stop heating and rolling, then cut enter water. This can save energy for max limit.