| Type: | Steel Plate |
|---|---|
| Standard: | ASTM, AISI, GB, JIS, DIN |
| Surface Treatment: | Pickling |
| Technique: | Hot Rolled |
| Application: | Ship Plate, Boiler Plate, Container Plate |
| Special Use: | High-strength Steel Plate |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier INCONEL Plates AS PER ASTM B168 INCONEL 601
nconel 601 is a nickel-chromium alloy utilized for various general-purpose engineering systems. Inconel 601 Plate shows superior resistance against corrosion and oxidation in an array of stress-induced environments in temperatures up to 2200 degrees F. The inconel 601 sheet develops an oxide film on the surface to resist spalling under severe thermal cycling systems. The sheets exhibit excellent strength and ductility even after long exposure to the ailments.
Standards: ASTM B168,ASTM A240.
Specialize : Shim Sheet, Perforated Sheet, B. Q. Profile.
Size: 0.5 MM TO 200 MM WIDTH & 1000 MM TO 3000 MM
Length: 1000 MM TO 6000 MM
Specifications : ASTM B 168 / SB 168
Form : Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
Finish : Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015max | 1.00 max | Balance | 58.0 - 63.0 | 21.0 - 25.0 |
ASTM B168 Alloy 601 Plate Mechanical Properties in annealed condition
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi - 80,000 , MPa - 550 | Psi - 30,000 , MPa - 205 | 30 % |
INCONEL 601 SHEETS, PLATES & COILS EQUIVALENT GRADES
|
STANDARD |
UNS |
WERKSTOFF NR. |
GOST |
BS |
OR |
EN |
JIS |
AFNOR |
|
Inconel 601 |
N06601 |
2.4851 |
XH60BT |
NA 49 |
ЭИ868 |
NiCr23Fe |
NCF 601 |
N |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}