| Function: | Flow Control |
|---|---|
| Installation: | Threaded Cartridge |
| Drive: | Hydraulic |
| Type: | Pilot-Operated Type |
| Spool: | 1, 2, 3, 4, 5, 6, ... |
| Flow: | 40lt, 50lt, 60lt, 80lt, 100lt, 120lt, 140lt, ... |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier hydraulic mobile control valve for Forklift
Manually or mechanically controlled hydraulic directional control valve Р80 is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 7 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
ConstructionР40 is a mono-bloc distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
MountingThe distributor is fixed with two bolts M8
| Ambient temperature | -40C...+60C |
| Viscosity | 12 ...800 mm2/s |
| Fluid temperature | -15C...+80C |
| Filtration | 10 to NAS 1638 |
| Max operating pressure | 250 bar |
| Back pressure | 50 bar |
| Nominal flow | 40 l/min |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Spool stroke | +/-7 mm |
| Actuating force | < 200 N |
| Modification/ Spools | up to 8 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}