| Function: | Flow Control |
|---|---|
| Installation: | Threaded Cartridge |
| Drive: | Hydraulic |
| Type: | Pilot-Operated Type |
| Spool: | 1, 2, 3, 4, 5, 6, ... |
| Flow: | 40lt, 50lt, 60lt, 80lt, 100lt, 120lt, 140lt, ... |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier hydraulic joystick control valve DCV100
Manually or mechanically controlled hydraulic directional control valve 100liters is designed for distribution and control of work flow between generator (pump) and executive mechanisms (cylinder, hydro-motor, etc.). It is manufactured with 1 to 12 plungers, with parallel or serial action, with common or individual back valve for each plunger, with or without safety valve.
ConstructionDCV100 is a section distributor. Its body is made of cast iron EN-GJL300. Plungers are made of carburized steel with hard chrome plating.
MountingThe distributor is fixed with two bolts M8
| Ambient temperature | -40C...+60C |
| Viscosity | 12 ...800 mm2/s |
| Fluid temperature | -15C...+80C |
| Filtration | 10 to NAS 1638 |
| Max operating pressure | 250 bar |
| Back pressure | 50 bar |
| Nominal flow | 100 l/min |
| Leakage(A,B-T) | 15cm3/min at 120bar |
| Spool stroke | +/-7 mm |
| Actuating force | < 200 N |
| Modification/ Spools | up to 12 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}