Product Description
Product Description:
1. Raymond Mill needs low investment costs. In the case of same fineness, lower costs than air milling machine.
2. Raymond Mill needs High rate of powder. Under the same fineness products and consumption of power, the capacity is 45% higher than air milling machine and mixing mill.
3. Raymond Mill consumes less wearing parts. All wearing parts use good quality resistant materials, more durable than traditional milling machines, generally, more than one year.
4. Grinding chamber of Three-rings Ultra-fine Mill is safe and stable. This milling machine has no rolling bearing and bolts, so there are no wearing parts which avoid the machine damage because of the bolts becoming adrift.
5. Raymond Mill produces high fineness of products. The final fineness can reach to d97≤ 5μ M.
6. Raymond Mill is environmental friendly. The whole production line has no dust pollution in the process of operation because of the adoption of efficient pulse dust collector, silencer, and silencer room, which is the state standard production and protect the environment around.
Raymond Mill is also known as the Mill Hill stone.Is a new mine milling equipment, milling machine is mainly used in mining, building materials,chemical, metallurgical and other industries, limestone,calcite,barite,dolomite,potassium feldspar,marble, talc, gypsum, kaolin,swelling soil, phosphate rock, manganese ore, iron ore, glass, ceramic, activated carbon, carbon black, refractory, insulation materials, Chemical raw materials, and Mohshardness of not more than 7, humidity less than 6 percent of more than 300 kinds of non-inflammable and explosive materials for milling processing, product fineness can be adjusted between 30-325 mesh(The finest 600mesh)
Working principle
Working principle:
The main bearing and each dial are driven by electromotor of main equipment through reducer, and numbers of ring and rolls which are rolling in the ring channels are driven by dial through plunger. After being crushed by hammer crusher, the big materials become small ones and they are sent to the storage bin by elevator. The electromagnetic vibrating feeder sends them to the edge of dial by centrifugal force, and ground by the grinding rings and rolls. Then the materials fall into the second and third ring and crushed and ground. The high pressure centrifugal blower inhales air from the outside and blow the materials which are ground in the third ring to powder Seperator.
Be processed materials into the Raymond Mill host the grinding chamber, due to the spindle rotates, centrifugal force, the roller swings out, pressed on the grinding ring.Between the blade to scoop up the materials sent to the grinding ring rolling mill rolls to achieve grinding, smash purpose, Material grinding, the powder with the blower cycle wind sorting through the analysis machine, fine through coarse material falls back to the grinding chamber to re-grinding, qualified powder with the air flow into the cyclone powder collector, through a powder discharge pipels finished.Airflow through the cyclone powder collector and then enter the blower to form a closed loop, so that the machine work properly and continuously.I wind through more than duct from the plane into the dust after purification.
Packaging & Shipping
The operation and maintenance:
(1)The raw material should be put into the machine after the machine running normally.
(2 )This machine is not allowed to state with the material in the machine. If the machine is stopped
because of stoppage, the residual material in the machine should be cleared. Then start the machine again.
(3)The material should be put into the machine uniformity, not sometimes much sometimes less.
It's better to use a feeding equipment.
(4)The bearing part should be add butter regularly.
(5)Every bolts should be checked to avoid flexible.
(6)The bearing should be changed in time if it is damaged to avoid damage other parts.
(7)While the machine is running formally, you should check if there is abnormal sound in the reducer box and or bearing part, if there is a too high temperature, if there is too big motor current and so on.If it happened, you should stop the machine to remedy of the trouble.
(8)The motor V-belt should be removed while examine and repair the machine for your safe.
Product Parameters
Specification and technical parameters:
Model |
HGM60 |
HGM80 |
HGM100 |
Average Diameter( mm) |
600 |
800 |
1000 |
NO. |
Roller |
15 |
21 |
27 |
Ring of Roller |
2 |
2 |
2 |
Feeding Size( mm) |
≤ 10 |
≤ 10 |
≤ 10 |
Output Size |
μ m |
5~45 |
5~45 |
5~45 |
Mesh |
3250~325 |
3250~325 |
3250~325 |
Capacity( kg/h) |
350~2500 |
600~4000 |
900~6000 |
Motor Power( kw) |
Main Engine |
37 |
55 |
90 |
Powder Concentrator |
11 |
18.5 |
30 |
Air Blower |
30 |
45 |
75 |
Virbrating Feeder |
0.06 |
0.06 |
0.15 |
Discharge Valve |
0.75 |
1.1 |
1.1 |
Dimension (L× W× H )( m ) |
10× 2× 5.53 |
11.9× 2.7× 5.8 |
14.5× 3.8× 6. |
Main Concentrator Weight ( kg ) |
5200 |
7000 |
9500 |
FAQ
FAQ:
1. The name and feature of the raw material?
2. Aim of using: get rid of impurity, filtration or grading?
3. Handling capacity: kg /h, L/h?
4. input and output mesh size: (mesh or mm)?
Our engineers will suggest you the most suitable one for you according to your information.
We will give you factory price with full specification, so pls leave us an inquiry to know more details about price, packaging shipping and discount.
Now, please click the following contact to send us email for best offer and more details !
↓↓↓
Web: hkrotarykiln.en.made-in-china.com
Henan Hongke Heavy Machinery Co.,Ltd
Tel&Fax:86-371-68617124