CAS No.: | N.a |
---|---|
Formula: | N.a |
EINECS: | N.a |
Color: | Black |
Appearance: | Powder |
Main Raw Material: | Epoxy |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
We can provide a variety of resin types such as mixed and pure polyester for artistic pattern effect powder coatings, suitable for indoor or outdoor use. This product has a unique and luxurious exterior decoration effect, which can help conceal the defects of the substrate itself. Widely used in the coating of various high-end metal products.
For metal effect powder coatings, the following two points should be noted: 1 Used for products of this type that contain metal pigments. When using an electrostatic gun for construction, it is necessary to ensure good grounding of the system, and set a lower electrostatic voltage and powder output to prevent sparking during spraying. To improve the decorative properties of the coating and overcome the tendency of metal pigments to peel off, we recommend using transparent powder coating for polishing.
We can provide products with various effects such as sand grain, hammer grain, silk grain, marble grain, and metal appearance.
We can provide a variety of glossy products according to user needs. (We do not recommend using a glossmeter to measure the gloss of art type coatings)
Specific gravity (g/cm3, 25 ºC): 1.2-1.8
Particle size distribution: 100% less than 100 microns (specific indicators depend on artistic effects and can be adjusted according to special coating requirements)
Curing conditions: Depending on the resin type of the product, please refer to the accompanying instructions for details.
Testing items | Inspection standards or methods | Inspection indicators |
impact resistance | GB/T 1732-1993 | 30-50kg.cm |
Cupping test | GB 9753-1988 | 6mm |
Adhesion (grid method) | GB/T 9286-1998 | 0level |
bend | GB 6742-1986 | 3mm |
Salt spray test | GB 1771-1991 | > 500time |
Damp heat test | GB 1740-1989 | >1000timeNote: |
Note: | 1. The above test uses a cold-rolled steel plate with a thickness of 0.8mm and standard pre-treatment, with a coating thickness of 60-80 microns. | |
The performance indicators of the above coatings may vary depending on the artistic effect and resin type. |
Q1: Can I order samples of powder coatings?
A1: Yes, we welcome ordering samples to test and inspect the quality. Mixed samples are acceptable.
Q2: What is the delivery cycle?
A2: The sample takes 3-5 days, and bulk production time for orders exceeding 10 tons takes 1-2 weeks.
Q2: Do you have a minimum order quantity limit for powder coating orders?
A2: Minimum order quantity 300KG
Q3: How did you ship the goods and how long will it take to arrive?
A3: We usually transport through DHL, UPS, FedEx, or TNT. It usually takes 4-6 days to arrive. Air and sea transportation are also optional.
Q4: How to process powder coating orders?
A4: First, let us know your requirements or applications (indoor or outdoor use). Secondly, we will provide a quotation based on your requirements or our suggestions. Thirdly, the customer confirms the sample and places a deposit on the order. Fourthly, we arrange production.
Q5: Can I print my logo on the packaging?
A5: Yes. Please notify us before we start production and confirm the design based on our samples first.
Suppliers with verified business licenses