High purity and impact Alumina Ceramic Lining Tiles for Inlaid Wear-Resistant Pipe Fittings
Product Description
The Ceramic panel is a high-performance abrasion and impact resisting linings for high-impact, high-pressure applications in which ceramic tile may not have sufficient structural resistance, and high-performance rubber may not offer the required wear life. In extreme applications, the Cube liners can be installed in a matrix or abrasion resistant steel plate to provide structural support for the ceramic/rubber matrix and provide exceptional wear life where competing products cannot.
Product Parameters
ategory |
HC90 |
HC92 |
HC95 |
HCT95 |
HC99 |
HC-ZTA |
ZrO2 |
Al2O3 |
≥90% |
≥92% |
≥95% |
≥ 95% |
≥ 99% |
≥75% |
/ |
ZrO2 |
/ |
/ |
/ |
/ |
/ |
≥21% |
≥95% |
Density |
>3.50g/ cm3 |
>3.60g/cm3 |
>3.65g/cm3 |
>3.70g/cm3 |
>3.83g/cm3 |
>4.10g/cm3 |
>5.90g/cm3 |
HV 20 |
≥900 |
≥950 |
≥1000 |
≥1100 |
≥1200 |
≥1350 |
≥1100 |
Rock Hardness HRA |
≥80 |
≥82 |
≥85 |
≥88 |
≥90 |
≥90 |
≥88 |
Bending Strength MPa |
≥180 |
≥220 |
≥250 |
≥300 |
≥330 |
≥400 |
≥800 |
Compression strength MPa |
≥970 |
≥1050 |
≥1300 |
≥1600 |
≥1800 |
≥2000 |
/ |
Fracture Toughness KIc MPam 1/2 |
≥3.5 |
≥3.7 |
≥3.8 |
≥4.0 |
≥4.2 |
≥4.5 |
≥7.0 |
Wear Volume |
≤0.28 cm3 |
≤0.25cm3 |
≤0.20cm3 |
≤0.15cm3 |
≤0.10 cm3 |
≤0.05cm3 |
≤0.02cm3 |
The cyclone tube is also called the cyclone separator. Its function is to separate the coarse and fine powders of the raw materials after being pulverized by the powder separator or mill. It is directly transported by the fan, and the air inlet and the cyclone separation part are the parts with large air volume and relatively serious wear. The normal wear of the steel plate will be worn out in about a year, so the use of anti-wear products is an ideal choice.
Most manufacturers choose wear-resistant ceramic sheets as the anti-wear product of the cyclone. The main component of the ceramic sheet is alumina. The manufactured ceramic sheet has remarkable characteristics such as high hardness, good stability and long-term wear resistance, and is accepted by the majority of customers.
Wear-resistant ceramic sheets also have high technical requirements for pasting. The specific construction steps are as follows:
1. The metal surface needs to be derusted and polished to reveal the metallic luster
2. Mix the ceramic glue in proportion and spread it evenly on the metal surface.
3. Paste the ceramic sheet on the surface of the scraped ceramic glue. It should be noted that the ceramic sheet and the ceramic glue must be tightly bonded together, and tap lightly with a rubber hammer to ensure that each ceramic sheet can be pasted. firm.
4. The maintenance cycle is generally 24 hours in summer and 48 hours in winter.
Detailed Photos
Company Profile
ZIBO QIMINGXING NEW MATERIAL is located in Zibo, Shandong,Near Qingdao port. With an excellent geographical location and a convenient logistics system,This enable us to provide you varies transportation modes (by express/air/sea) according to your needs. Also, ensure us OTD and save your shipping cost. Our 86700 m2 factory has obtained ISO 9001 and ISO 14001 certification and employs over 350 staff members who enable us to provide you with fully custom services upon request.
We accept customized designs, packing, logo or custom material. We can make custom design based on your inquiry. We provide NDA agreement to keep your design in private.
Our well-equipped facilities and excellent quality control throughout all stages of production enable us to guarantee your satisfaction.
Our business staff have 7~10 years of experience in the industry and can provide you with quality services. All your inquiries will be responded within 24 hours.
PROFESSIONAL
FULL SERVICE
PROTECTION FOR YOUR BENEFIT
FAQ
Q: What is your experience in your products?
A: We have 23 years experience in this industry line. We are professional manufacturer in this area.
Q: What is your MOQ?
A: The MOQ is different as per different products, for example, 1 Ton for ceramic ball.
Q: Can you accept small quantity sample order before production?
A: Yes, we can offer sample for your testing first.
Q: Can you provide free sample?
A: Yes, within 10kg.
Q: What is your production time?
A: We have large stock for standard products. Normally within 7-10days after receipt the deposit.
Q: What are your payment terms?
A: T/T, L/C, Western Union