| After-sales Service: | 1 Year |
|---|---|
| Function: | IV Tesing and Power Source |
| Display: | Digital |
| Usage: | Electric Component Tester, Gas Sensor Tester |
| Type: | Transistor Tester |
| Environment: | Room Temperature |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Introduction
Wuhan Precise Instrument Co.,Ltd has been creating S series source measure meter for so many years.
The source measure meter function has high-precision, large dynamic range, digital touch screen, four-quadrant operation, collect and test input & output voltage and current, meanwhile, maximum output voltage 300V, and minimum output current 100pA.
Therefore, it is widely used in electrical characteristics tests.
Applications
Semiconductor device test: Resistance, Diode, Transistor, MOSFET, SiC, GaN, etc .
Energy and efficiency test: LED / AMOLED, Solar cells, DC-DC converters, etc .
Sensor characteristic test: Resistivity, Hall effect, etc .
Organic material test: Electronic ink, Printed electronic technology, etc .
Nanomaterial test: Graphene, Nanowires, etc .
Four quadrant diagram
S100 S200 S300
Capabilities
| Max output power | 30W, four quadrant source or sink operation |
| Source/sink limits | ±30V (≤1A), ±300V (≤100mA), |
| ±1.05A (≤30V), ±105mA (≤300V) | |
| Overrange | 105% of range, source and measure |
| On-load capacitance | <22nF |
| Noise (20MHz) | 2mV RMS, <20mV Vp-p |
| Voltage guard | Output impedance 1 kΩ, Deflection-Voltage<80uV |
| Max sampling rate | 1000 sample/s |
| Trigger | I/O |
| Communication Interface | RS-232,GPIB,LAN |
| Power supply | AC100V~240V 50/60Hz |
| Temperature coefficient | 25±10 ºC |
| Length,Width and Height | 425mm L x 255mm W x 106mm H |
| Weight | 5KG |
| Warranty | 1 year |
| Voltage |
Source |
Measure |
||
| Range |
Programming resolution | Accuracy±(% rdg.+ volts) | Programming resolution | Accuracy±(% rdg.+ volts) |
| 300mV | 30uV | 0.1%±300uV | 30uV | 0.1%±300uV |
| 3V | 300uV | 0.1%±500uV | 300uV | 0.1%±500uV |
| 30V | 3mV | 0.1%±3mV | 3mV | 0.1%±3mV |
| 300V | 30mV | 0.1%±30mV | 30mV | 0.1%±30mV |
| Current |
Source |
Measure |
||
| Range |
Programming resolution | Accuracy±(% rdg.+ A) | Programming resolution | Accuracy±(% rdg.+ A) |
| 100nA | 10pA | 0.1%±0.5nA | 10pA | 0.1%±0.5nA |
| 1uA | 100pA | 0.1%±3nA | 100pA | 0.1%±3nA |
| 10uA | 1nA | 0.1%±5nA | 1nA | 0.1%±5nA |
| 100uA | 10nA | 0.1%±50nA | 10nA | 0.1%±50nA |
| 1mA | 100nA | 0.1%±300nA | 100nA | 0.1%±300nA |
| 10mA | 1uA | 0.1%±5uA | 1uA | 0.1%±5uA |
| 100mA | 10uA | 0.1%±20uA | 10uA | 0.1%±20uA |
| 1A | 100uA | 0.1%±2mA | 100uA | 0.1%±2mA |
Detailed Photos
Sourcemeter Structure
1.front panel
Front panel control instruction:
1.power:down is on, and up is off;
2.USB interface:save test data or upgrade source meter software;
3.BACK: back to last control interface
4.5.6. Enter button, menu button, home button respectively: no function is assigned at present, and green light and orange light will flash when power on;
7.creen touch: set various parameters of the source meter directly on screen;
8.meter model: S series source meter has three models: S100, S200, and S300. For the different parameters of the three models, please refer to Section 1.2;
9.Adjust parameters: turn it counterclockwise to decrease the parameter, and turn it clockwise to increase the parameter;
10.output button: the button lights up green when the output is clicked;
11.output terminals: FORCE (force) terminal can output current or voltage, and measure current or voltage at the same time, use FORCE terminal in two-wire mode; SENSE (induction) terminal is used to test voltage, SENSE terminal test voltage can eliminate the voltage drop in the wire, four-wire mode makes voltage measurements of the device under test (DUT) is more accurate.
2.back panel
Company Profile
Established in 2009,Wuhan Precise Electronic technology Co., Ltd is a high-tech enterprise, research and develop automatic test equipment, optical communication device production line monitoring and test program. We are a technology-based enterprise integrating research and development, production, sales and services. Meanwhile, R&D team consists of masters and doctors, and the management, marketing, service teams are composed of experienced professionals
Precise products include: CHIP,BAR,TO,OSA,optical model and BOB production line, etc.
Precise customers include: Huawei, Hisilicon, Accelink, HG Genuine ZTE, and Hisense, et
Wuhan Precise Instrument Co., Ltd is a wholly-owned subsidiary of Wuhan Precise Electronic technology Co., Ltd. Located in "Wuhan·Optics Valley of China ", Our main product are high-Precision digital source meter and system, mainly used in the testing process of semiconductor devices. Meanwhile, provide modular hardware, efficient drivers and algorithm software to help users build custom solutions.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}