High Oil Yield Used Motor Oil Recycling Plant
overview :This Used Motor Oil Recycling Plant can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.
Systems of equipment
1 Pretreatment system:Waste oil will be pumped into the distillation kettle after pretreated.
2 Distillation system: through burning coal,gasor fuel oil to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.
3 Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.
4 Oil storage system: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.
5 Vacuum system: meet the technology requirement.
6 Filtration system: rapidly filter out mechanical impurities in the base oil, gasoline and diesel, get the high quality base oil, gasoline and diesel.
Base oil: 85%~88 %( index same as SN150~SN200)
Gasoline: about 3%
Diesel: about 3%-4%
Oil residue: 6%~8%
Index of oil after treatment
|Light base oil||Medium/heavy base oil|
|2||Viscosity index|| ||≥99||110|
|7||Flash point open||ºC||≥180||≥210|
performance characteristics,advantage introduction
1 widely usage: can treat gasoline engine oil, diesel engine oil, rubber oil, waste oils and other various cleaning oil
2 low processing costs:the total cost of processing one ton used oil only USD30(including fuel, electricity and pretreatment agent)
3 high recovery rate: base oil:85%~88%,gasoline 3%,diesel:3%~4%,oil residue:6%~8%
Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated,labor-intensive,and a lot of good oil will be pumped as residue oil , the yield at most up to 72% ,too much residue oil.
4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.
5 environmental protection: the whole process is all sealed, won't release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.
6 this waste motor oil vacuum distillation machine use a special way heating, high thermal efficiency, and difficult to form carbon fouling.safe,reliable,durable.this is the most advanced technology in the world and suitable for large-scale industrial production.
7 easy operation, low labor intensity, only 1 to 2 workers can easily operate the machine.
8 without the use of heat-conduction oil furnace, the heat-conduction oil furnace heating temperature can't meet the technical requirements, oil yield only 65%,and need regular maintenance; without the use of special high temperature resistant oil pump, the pump is very expensive and is easily broken, continuous operation mode need to frequently replace this pump; without the use of salt furnace heating, the temperature is too high, extremely unsafe; electric heating can't meet the technical requirements, no successful cases in the world.
Some Question about this plant
1 what kind of raw material the ZSA machine can treat
ZSA machine can treat all kinds of waste lubricant oil,motor oil,car engine oil.these kind of oil can be mixed.
2 what kind of final product we can get
main product is base oil,a little gasoline and diesel
3 how about the oil yield of ZSA waste motor oil vacuum distillation machine
in normal industrial production,can get at least 85% base oil.this can be assured
4 how to heat the ZSA machine
can use fuel oil or gas to heat,environmental friendly,don't suggest use coal.not good for environment
5 need any other special chemical in the processing
just need the pretreatment chemical.this chemical customer can buy from local market.don't need other chemical.don't need acid and clay.
6 what kind of equipment need customer prepare?
customer just prepare the good oil and waste oil tanks,a water pool and power supply
7 how to install the ZSA machine
engineer will at site for installaton and commissioning,till customer can use smoothly
8 how about the guarantee
5Year Guarantee for main parts,1 Year for mechanical and electrical products. any question of the plant will reply in 24 hours!
9 need how many workers to operate the machine,need any special technologist?
2 workers can easily operte the plant,don't need special technologist
10 about how long can deliver the machine
according to different capacity,usually 30~50 working days can deliver the machine
Except this waste motor oil vacuum distillation machine ,we also have other series products
ZSC Engine Oil Purifier Series
ZSA vacuum distillation machine to base oil
JNC Waste engine oil and black oil regeneration diesel oil equipment
RZL Lubricating Oil Purifier
RZL-B Series Lubricating Oil Purifier
TZL Turbine Oil Purifier
ZLA Two-Stage Vacuum Oil Purifier Series
ZLC Two-Stage Multi-Function Vacuum Oil Purifier Series
ZL series of high-efficient vacuum oil purifier
KL FIRE-RESISTANT OIL FILTER MACHINE SER
TLA light fuel oil purifier series
JL Portable-type Oil Purifier
LY Plate Pressure Oil filtering Machine