Basic Info.
Interior Size (Cm)W*H*D
40*50*40
Temperature Range
-20ºC~+150ºC
Temperature Stability
±0.5ºC
Temperature Uniformity
±2.0ºC
Humidity Deviation
≤±5%Rh When Humidity Is Less Than 75%Rh;
Heating up
Heat up From -20ºC to +150ºC,≤60mins
Cooling Down
Cool Down From +20º
Transport Package
Exported Plywood Case
Specification
93*131*81 CM
Product Description
Introduction
The temperature and humidity tester is designed for testing the capability of heat-endurance, cold-endurance, dryness-endurance, and humidity-endurance. It is suitable for the industries of electron, electrical equipment, vehicle, metal, chemistry, building materials, luggage, adhesion tape, printing, packaging, etc.
Specification
Model | TS-80-2M | TS-150-2M | TS-225-2M | TS-408-2M | TS-1000-2M |
---|
Capacity | 80L | 150L | 225L | 408L | 1000L |
---|
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
---|
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
---|
Temperature range | -20ºC~+150ºC |
---|
Temperature stability | ±0.5ºC |
---|
Temperature uniformity | ±2.0ºC |
---|
Humidity range | 20%~98%RH |
---|
Humidity stability | ±1.5% |
---|
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
---|
Heating up | heat up from -20ºC to +150ºC,≤60mins |
---|
Cooling down | cool down from +20ºC to -20ºC, ≤40mins |
---|
Ambient temperature | ambient temperature condition for the chamber working:+5ºC~+35ºC |
---|
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish |
---|
Interior material | SUS304 stainless steel |
---|
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton |
---|
Refrigeration mode | mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling |
---|
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) |
---|
Refrigerant | environment protection R404A(DuPont) |
---|
Circulating fan | high temperature induction motorcentrifugal wind wheel |
---|
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater |
---|
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel |
---|
Control mode | curing input PLC control system |
---|
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input |
---|
Operation mode | fixed value and program |
---|
Program capacity | 120 porgrams and each program can set 100 sections |
---|
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk |
---|
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis |
---|
Water supply | pump drive |
---|
Water tank | 15L/20L food level PE water tank, available to clean dismantling. |
---|
water requirements | resistivity of humidifying water supply ?≥500MΩ |
---|
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads |
---|
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire |
---|
Single maximum currently(A) | 7A | 9A | 12A | 13A | 21A |
---|
Rated power(KW) | 2.5KW | 4.5KW | 6KW | 8KW | 12KW |
---|
Weight(KG) | 250 | 290 | 300 | 380 | 680 |
---|
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding |
---|
Model | TS-80-4M | TS-150-4M | TS-225-4M | TS-408-4M | TS-1000-4M |
---|
Capacity | 80L | 150L | 225L | 408L | 1000L |
---|
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
---|
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
---|
Temperature range | -40ºC~+150ºC |
---|
Temperature stability | ±0.5ºC |
---|
Temperature uniformity | ±2.0ºC |
---|
Humidity range | 20%~98%RH |
---|
Humidity stability | ±1.5% |
---|
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
---|
Heating up | heat up from -40ºC to +150ºC,≤60mins |
---|
Cooling down | cool down from +20ºC to -40ºC, ≤40mins |
---|
Ambient temperature | ambient temperature condition for the chamber working:+5ºC~+35ºC |
---|
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish |
---|
Interior material | SUS304 stainless steel |
---|
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton |
---|
Refrigeration mode | mechanical vapour compression refrigeration-single stage; cooling mode: air-cooling |
---|
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) |
---|
Refrigerant | environment protection R404A(DuPont) |
---|
Circulating fan | high temperature induction motorcentrifugal wind wheel |
---|
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater |
---|
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel |
---|
Control mode | curing input PLC control system |
---|
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input |
---|
Operation mode | fixed value and program |
---|
Program capacity | 120 porgrams and each program can set 100 sections |
---|
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk |
---|
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis |
---|
Water supply | pump drive |
---|
Water tank | 15L/20L food level PE water tank, available to clean dismantling. |
---|
water requirements | resistivity of humidifying water supply ?≥500MΩ |
---|
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads |
---|
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire |
---|
Single maximum currently(A) | 8A | 10A | 13A | 14A | 24A |
---|
Rated power(KW) | 3.5KW | 6KW | 7KW | 9KW | 13KW |
---|
Weight(KG) | 260 | 310 | 320 | 400 | 700 |
---|
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding |
---|
Model | TS-80-7M | TS-150-7M | TS-225-7M | TS-408-7M | TS-1000-7M |
---|
Capacity | 80L | 150L | 225L | 408L | 1000L |
---|
Interior size (cm)W*H*D | 40*50*40 | 50*60*50 | 50*75*60 | 60*85*80 | 100*100*100 |
---|
Exterior size (cm)W*H*D | 93*131*81 | 100*155* 110 | 100*170* 120 | 110*180* 140 | 150*195* 165 |
---|
Temperature range | -70ºC~+150ºC |
---|
Temperature stability | ±0.5ºC |
---|
Temperature uniformity | ±2.0ºC |
---|
Humidity range | 20%~98%RH |
---|
Humidity stability | ±1.5% |
---|
Humidity deviation | ≤±5%RH when humidity is less than 75%RH; ≤±3%RH when the humidity is more than 75%RH |
---|
Heating up | heat up from -70ºC to +150ºC,≤60mins |
---|
Cooling down | cool down from +20ºC to -70ºC, ≤40mins |
---|
Ambient temperature | ambient temperature condition for the chamber working:+5ºC~+35ºC |
---|
Exterior material | 1)stainless steel; 2)galvanized steel sheet bake finish |
---|
Interior material | SUS304 stainless steel |
---|
Insulation technology | outer rigid polyurethane foaminter glass fibre cotton |
---|
Refrigeration mode | mechanical vapour compression refrigeration-cascade cycle;air-cooling/water cooling |
---|
Refrigeration compressor | totally enclosed plunger compressor imported from France (low noise/environment protection) |
---|
Refrigerant | Environment protection R404A+R23(DuPont) |
---|
Circulating fan | high temperature induction motorcentrifugal wind wheel |
---|
Heater | high reliability stainless steel packaging finned heater/selectable: nickel chrome alloy bare wire heater |
---|
Humidifier | built-in stainless steel anticorrosion heating pipe, deflector type humidification(convenient to clean, low water consuption)/available to select outer humidification barrel |
---|
Control mode | curing input PLC control system |
---|
Displayer | 7 inches TFT Truecolor LCD screen,resolution: 800*480; manual touch screen input |
---|
Operation mode | fixed value and program |
---|
Program capacity | 120 porgrams and each program can set 100 sections |
---|
File saving | with USB interface,convenient to input or output the programs and the internal parameters; available to output the curves and datas by U disk |
---|
Communication | to select LAN network interface, convenient to remote connection control and fault diagnosis |
---|
Water supply | pump drive |
---|
Water tank | 15L/20L food level PE water tank, available to clean dismantling. |
---|
water requirements | resistivity of humidifying water supply ?≥500MΩ |
---|
Standard accessaries | a 50mm diameter test hole and a soft plug;2 stainless steel shelves with excellent ventilation; a observing window,4 mobile caster wheels and 4 wheel pads |
---|
Power | 3 phase, 4 wires, 380V 50Hz±10%+protective earth wire |
---|
Single maximum currently(A) | 11A | 14A | 16A | 16A | 28A |
---|
Rated power(KW) | 5KW | 8KW | 9KW | 10KW | 16KW |
---|
Weight(KG) | 320 | 340 | 350 | 430 | 730 |
---|
Protection device | power anti-phase overvaltage protection; power leakage protection switch; test specification overtemperature protection(independent); compressor overload high and low pressure protection; heater overtemperature protection;humidifier dry heating protection;water shortage protection; controller self diagnosis fault reminding |
---|
Address:
No. 1115, A1 Building, a Area, Tianan Cyber Park, 1 Huangjin Road, Nancheng District, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Manufacturing & Processing Machinery, Transportation
Management System Certification:
ISO 9001, ISO 9000
Company Introduction:
Dongguan Yuelian Testing Machines Co., Ltd was established in 1994 in Taiwan, specializing in R&D, manufacturing and marketing of universal material testing machines, physical testing equipments, simulated environment testing equipments and import & export business of goods and technology, which have been well received by customers for many years. In order to enhance sales and service for other customers outside Taiwan, Yuelian respectively established manufacture factory in Dongguan Guangdong in 2004, Suzhou Branch Office in Jiangsu Province in 2006, Zhongshan Branch Office in Guangdong Province in 2008 in China mainland, continuously improving sales and service network.
Yuelian is an integrated enterprise that combines with R&D, manufacture and marketing. High-grade product appearances, ingenious structure, CNC parts, laser processing, strong interchangeability and great precision have been recognized by customers for many years. Yuelian products are now widely used in electronics, adhesive products, luggage & handbag, leather & shoes, packaging & printing, exercise equipment, medication & chemistry, furniture manufacture, textile printing & dyeing, toys, metal wire, rubber plastic, chemical paint and other industries. It also maintains long-term friendly and cooperative relationship with national research institutions, universities & colleges, commodity inspection agencies and other departments. Yuelian has its own professional R&D team with the capability of designing testing machines, which is beneficial from the long-term investment on R&D, resulting in high-texture appearance, good manufacturing process and subtle precision of products. Self-designed universal material testing machine test and its control system have the advantage of software upgrading, which can achieve network remote assistance, driving software test requirement to quicker responses and solutions in remote distance.
Yuelian always takes innovation, effectiveness, and brand as its enterprise spirit;
Takes producing superior products with responsibility for all customers as it quality policy;
Takes achieving high quality to survival, reasonable management to benefit, and firm faith in development as its management police;
Takes the guide by science & technology, ingenious structure and leading low cost as its R&D policy;
Takes people-orientation, superior standard and the best use of human resources and intelligence as its employment ideology.
Takes improving norms in operation, establishing efficient mechanisms and strengthening sustainable improvement as it manufacture ideology;
Yuelian takes strict management, consummate service, well-deserved reputation and outstanding quality as its principle, to make the company sustainable, healthy, and stable development.