| Bonding Function: | Structural Adhesive |
|---|---|
| Morphology: | Liquid |
| Application: | Synthetic Turf |
| Material: | Polyurethane |
| Classification: | Room Curing |
| Main Agent Composition: | Polyurethane Resin |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
CHARACTERS
(1) Long pot life under room temperature, cures fast when heating, improve the production efficiency
(2) Slight foaming, good flexibility, resistant to bending
(3) High drawing strength, low adhesive consumption, low comprehensive cost
(4) Good flexibility, resistant to bending
(5) High gloss
(6) Resistant to water, acid, alkali and salt aging
IMAGE
TECHNIACAL DATA
|
|
Flexibond 8260 |
Flexibond 8201 |
|
Color |
Black |
Brown |
|
Color after mixing |
Black |
|
|
Viscosity |
8000-15000mpa.s |
200-250mpa.s |
|
Viscosity (after mixing) |
3000-6000mpa.s Brookfield - RVT 6/20 |
|
|
Mixing ratio (by weight) |
6.5 |
1 |
|
Pot life (23ºC) |
30-50mins (can be adjusted) |
|
|
Cure rate (120ºC oven) |
2-5mins (can be adjusted) |
|
|
Shelf life (unopened below 25ºC) |
12 months |
6 months |
*Testing temperature 23ºC and 50% RH
USES
(1) Preparation
Mix the resin and the hardener in the mixing machine. The adhesive should keep a constant temperature (recommended temperature 25-35ºC) in the mixing machine to ensure the applying stability. The mixing ratio should be corrected with the mixing machine before starting application.
Note: Sediment in the resin is normal. Mix the resin uniformly before using.
(2) Substrate Surface Treatment
The substrate surface should be clean and dry, free of grease, dust and other contaminations.
(3) Mixing ratio
Flexibond 8260: Flexibond 8201=6.5:1 by weight.
The mixing ratio varies with the different requirements of adhesive consumption and hardness. If the adhesive consumption is low, in order to achieve a high drawing strength, we recommend mixing ratio 6.5:1; if the adhesive consumption is high, in order to achieve a good flexibility, we recommend mixing ratio 8.5:1. For details, please consult Comens technical department.
Stir uniformly component A before using it. Mix the two components strictly according to the ratio. Mix for 1-2 more minutes after the adhesive color is uniform.
(4) Adhesive Coating
The adhesive consumption is 500-1000g/. The consumption varies with the substrates surface structures and different performance requirements. The mixed adhesive should be used up within its pot life.
(5) Curing and Curing Time
The substrates coated with the adhesive needs to be cured. The turf sheet should be rolled after the adhesive surface tack free. The curing rate varies with the temperature. The lower the temperature is, the longer the curing time it takes. The higher the temperature is, the shorter the curing time it takes. Under the temperature 120ºCin the oven, the curing takes 2-5 minutes.
(6) Cleaning
Recommended cleaning solvent: methylene dichloride, ethyl acetate.
PACKGING
Component A (Resin): 1625kg/drum
Component B (Hardener): 250kg/drum
The packaging can be adjusted according to customer's requirement.
FAQ
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}