Type: | Capacitive Pressure Sensor |
---|---|
Component: | Mechanical Structure Type |
For: | Diffused Silicon Pressure Transmitter |
Output Signal Type: | Digital Type |
Production Process: | Integration |
Material: | Stainless Steel |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Digital display pressure transmitter adopts high precision and high sensitivity pressure sensing element.
The pressure signal of the measured medium is converted into a standard analog signal or a digital signal by a stable and reliable amplifier circuit with strong anti-interference ability.
And there are exquisite packaging technology and perfect detection process to ensure the excellent performance of the product.
Widely used in petroleum, chemical industry, metallurgy, environmental protection, metrology, automation control engineering and production process testing and other industrial automation fields.
Test medium: liquid or gas compatible with the material | Measuring range: any range within -0.1~250MPa |
Accuracy level: 0.1%FS, 0.25%FS, 0.5%FS | Stability: ±0.25%FS/ year, ±0.5%FS/ year |
Output signal: 4~20mA, 0~10V, RS485 communication | Operating voltage: 12~36V DC / 5V DC |
Power impact: Less than 0.01%/V of the output range | Temperature effect: ±1.55%FS/ year, ±3.0%FS/ year |
Operating temperature: -20~80ºC | Compensation temperature: -20~80ºC |
Overload capacity: 300% | Threaded interface: M20*1.5, G1/2, 1/2NPT, etc |
Load resistance: 4 ~ 20mA | (Where: U is the power supply voltage, RD is the internal resistance of the cable) |
1. Do not measure media incompatible with the transmitter material
2. Ensure that the power supply voltage meets product requirements, and connect cables according to the instructions
3. The transmitter should be installed in a ventilated and dry place to avoid direct exposure to strong light and rain
4. Use snakeskin pipe or iron pipe to protect the leading cable, or set the cable high
5. It is recommended to power on for at least 10 minutes to achieve optimal product performance
6. When removing the transmitter, ensure that the pressure source is turned off to prevent the media from ejecting
7. This product is not explosion-proof, and the use in the explosion-proof area will cause major accidents
Suppliers with verified business licenses