Basic Info.
Signal Transmission
Wired Alarm
Power Voltage
15VDC-28VDC
Sensitivity Level
Level 1: High Sensitivity. Level 2: Medium Sensiti
Normal Monitoring State
Red LED Flashes Periodically
Operating Environment: Temperature
-10c-+50c
Length of Optical Pathway
8m-100m
Dimension: Length
206mm Width: 95mm Thickness: 95mm
Material and Color of Enclosure
ABS, Gray
Specification
GST Brand optical Reflective beam detector relay
Product Description
I General
HD106 Conventional Reflective Beam Detector (hereinafter called the detector) is a non-addressable reflective infrared beam smoke detector, which must be used together with a reflector. The number of reflector(s) to be used (one or four) depends on the distance from the detector.
With excellent built-in microprocessor, the detector has strong ability of analysis and judgment. The detector can automatically carry out system adjustment, compensation
of variation of ambient data, and judgment of fire and fault through fixed algorithm, and indicate these states by LED and signal output terminals. With new and reasonable design, attractive appearance, flexible adjustment and alignment method it's easy to install and adjust. The sensitivity of the detector can be set through hand held programmer in field, decreasing the demand for cleanliness of field conditions, and enlarging application areas. The detector is applicable to historical buildings, warehouses, large storages, shopping malls, leisure centers, exhibition halls, hotel lobbies, printing houses, clothing factories, museums and prisons etc, as well as places where slight smoke particles exist.
II Features
(1) Wide operating voltage range, big monitoring areas.
(2) Combination of the emitting and receiving part makes mounting easy and optical pathway accurate.
(3) Built-in microprocessor enables intelligent judgment of fire alarm and fault.
(4) The detector can calibrate automatically, which ensures that one person complete adjustment in short time. It's also convenient to operate.
(5) Self-diagnosis function can monitor the inner fault.
(6) Automatic compensation for factors weakening received signals, such as dust contamination, positional excursion and ageing transmitter.
(7) It has passive output contacts for fire alarm and fault.
(8) Two sensitivity levels can be set in field.
(9) The detector's optical pathway is designed with strong anti-interference ability.
(10) SMT processing technology.
(11) Attractive and decent appearance.
III Technical Specifications
(1) Power Voltage: 15VDC-28VDC
(2) Power Current: Commission current?20mA Standby current?12mA Alarm current?22mA
(3) Fire Alarm and Fault Contact Output:
Fire Alarm Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fire alarm state.
Fault Relay: Contact capacity 28V/2A, which is normally open in normal state and closed in fault state.
(4) Angle of Adjusting: -6°-+6°
(5) Dependency Angle of Optical Pathway Orientation: 0.5¢
(6) Sensitivity Level:
Level 1: High sensitivity. Level 2: Medium sensitivity.
(7) Indication of Detector State:
Commission: Green LED and Yellow LED are lit or flash in a certain way. See details in Section VI Commission.
Normal monitoring state: Red LED flashes periodically.
Fire: Red LED constantly illuminates, and Yellow LED turns off. Fire alarm should be cleared through powering up again.
Fault: Yellow LED constantly illuminates. The detector clears the fault signal automatically if the condition causing the fault disappears.
Optical pathway obscured totally: the detector first gives fault signal and turns on Yellow LED. 20s later, it alarms fire, illuminates Red LED and turns off Yellow LED. Note: In this case, it does not mean there is a fire. After the obscuration
is removed, the detector clears fault signal automatically. Fire signal has to be cleared by powering up the detector again.
(8) Operating Environment: Temperature: -10°C-+50°C
Relative Humidity 95%, non condensing
(9) Monitoring Area: aximum monitoring area: 14*100=1400m2
Maximum width: 14m
(10) Length of Optical Pathway: 8m-100m
(11) Protection Level:
Under common environment, ingress protection rating is IP20.
Under special environment, ingress protection rating is IP66 through glue-seal treatment.
(12) Dimension: length: 206mm width: 95mm thickness: 95mm
(13) Material and Color of Enclosure: ABS, gray
(14) Weight: 450g
(15) Mounting Hole Spacing: Spacing for embedding: 158mm
Spacings for surface mounting: 79mm€96mm
Please feel free to contact us for more details
Address:
4f, Building B1, Xinhaosheng High-Tech Park, Yonghe Road, Fuyong Town, Baoan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Security & Protection
Company Introduction:
Shenzhen Zoanco Electronic Co., Ltd. Specializes in fire alarm security products, such as smoke, heat, gas detector, fire control module, manual call point, sounder strobe, alarm button, fire alarm control panel, etc. In good quality and competitive price. We have been in this field for almost 10years and already established a long-term stable cooperative relations with many retailers and agents. Our products have been exported to many overseas countries and wined a good compliment!
Over the past ten years, we have been dedicated to service the diverse needs of our customers. Although we started out as a tiny engineering and manufacturing company in China and have grown into a global player in the international safety market. Zoanco continues to work hard to earn your trust and retain your confidence in our products.
Smoke, heat, and gas detector manufacturing isn′t an easy business to be in. Faced with the stiff competition from cheaply made, low-quality detectors, we remain committed to our customers with high quality products at the most reasonable prices. Our focus is to deliver meaningful value to clients that choose our brand over the competition through our commitment to quality. This year we are preparing to introduce our new line of advanced, feature-rich conventional and addressable detectors and panels at a competitive price.
Warmly welcome to contact us for more details!