Glass Substrate Annealing Furnace (HSA10005-1907N)

Specifictation of this Annealing Furnace:
1. Operating Temperature: 600deg. C; Max Temperature: 650deg. C
2. Effective Dimentsion of Furnace Entrance: 1000× 50mm(W× H)
3. Belt Width: 1000mm
4. Belt Material: SUS314.
5. Drive System: Big wrapped angle friction drive.
6. Speed Range: 50mm~350mm/min.
7. Firing Atomsphere: Nitrogen.
8. Gas Pipelines: 14 N2 pipelines (the entrance and exit gas curtain have one pipeline separetely; Four in the exhaust stack, seven pipelines are in the chamber; One in the cooling jacket; The gas flow can be adjusted by the flowmeter).
9. Oxygen Content Testing: 4 points (the entrance and exit gas chamber have one testing point separately; One testing point in the zone 12 of the chamber and one in the cooling jacket.
10. Exhaust System: 4 exhaust stacks(each exhaust stack has a venturi exhaust)
11. Cooling Mode: Water cooling.
12. Cleaning Mode: Brush cleaning.
13. Furnace Layout: Overall Length: 14450mm
14. Entrance Vestibule Section: 240mm Length
15. Entrance Insulation Zone: 100mm length.
16. Heating Section: Length: 8550mm (19 zones) 450mm length/each zone
17. Exit Insulation Section: Length: 100mm Length
18. Air Cooling Section: 200mm Length
19. Water Cooling+ Exit Vestibule Zone: 2000mm Length.
20. Load Table: Length: 1520mm
21. Unload Table: Length: 1520mm
22. Stability of Temp Control: ± 1deg. C, Shimanden SR94 Intelligent Temperature Controller with PID parameter auto-setting. (If the furnace is equipped with industrial computer, the intelligent temperature controller will use MR13 model. )
23. Control System: Use DCS control system, single loop intelligent temperature controller, PID parameter auto-setting, Industrial computer carry out multiple program saving.
24. Uniformity of the Furnace Temperature: ± 3deg. C(Flat- temperature 600deg. C)
25. Control Zone: 19 zones.
26. Control Temp Point: 38 points.
27. Temperature Testing Point: 1 point (For exit cooling water temperature)
28. Chamber Structure: Use 316L 8mm thick Muffle in the chamber.
29. Alarm Protection: Over temp, thermocouple failure, low gas pressure, over water temperature and other audible and visual alarm protection.
30. Gas Inlet Pressure: 0.2~0.4Mpa
31. Flowmeter: 14× 24~240L/min. Its flow is adjustable.
32. The Temperatue of Incoming Water: < 20 deg. C
33. Water Inlet Pressure: 0.15~0.3Mpa
34. The Temperature of Furnace Surface: 35. Max Heating up Power: 152KW.
36. Insulation Power of Empty Furnace: 50KW
37. Power: 277VAC± 10%, 60Hz± 5%, 3phase, 5line (A, B, C, Ground, 0), independent power supply, total capacity: > 180kVA.
38. Weight: About: About 3500Kg
39. Overall Dimension: 14450× 1640× 1350(L× W× H) mm
40. Installation Dimension: 18000mm× 3000mm× 3000mm(L× W× H), Installation Area: >60m2

We (Hengli Eletek)  have been designing and manufacturing industrial furnaces for over 30 years as part of a major electronics research institute. We were incorporated as a company in 1992 and today occupy a state-of-the-art ISO9001-certified design and manufacturing facility. Today, our furnaces are used by customers in Australia, Austria, Canada, China, Costa Rica, Hong Kong, Hungary, India, Indonesia, Israel, Italy, Malaysia, Mexico, Netherlands, Russia, Singapore, Slovenia, South Korea, Spain, Sri Lanka, Switzerland, Taiwan, Turkey, UK, USA and Vietnam. We have served the furnace needs of many renowned customers including Apple, IBM, Ferro, Eaton, Schott AG, EBG, First Solar, NASA, Neways Micro, Coilcraft, PCB, 3G Solar, Materion, and more.

Furnace can be produced (procedure 90~135days) right away after pre-payment confirmation. COSCO Maersk MSC ship to worldwide for safe shipping, don't worry about package damage or loss. It takes about 15-40 days to worldwide, Please note us your contact details include your phone number for easy contacting from shipping company officer.