Basic Info.
Model NO.
RMBS07-S23-125A409.6V
Appplication
LiFePO4 UPS Bess
Warrenty
3 Years for Rbms and 1 Year for Bmu/Pcbs
Battery Type Applicable
LFP Ncm Lto
Design Feature
AC/DC Dual Power Supply
Communication
RS485 TCP/IP Can Dry Contact
Protect
Charge and Discharge
Structure
Group-Rack-Module 3-Level
Transport Package
Bubble Bag, Foam, Carton
Specification
440*223*550mm
Product Description
Lifepo4 BMS High Voltage BMS 128S409.6V 125A lithium battery management system BMS for solar ESS UPS power LFP lithium batteries BMS
Overall Solution HV BMS Configuration:
Solution:
128S409.6V 125A BMS solutions include:
1 set Master BMS, Model#: RBMS07-S23-125A409.6V
8 sets 16S Slave BMU Model#: BMU08-16S8T48F
8 sets 16S Wire Harness(including voltage acquisition wire and temperature acquisition wire,
BMU communication wires, Fan power wire.)
A central control model#: SBMS07 will be required for multiple racks parallel connection applications, equipped
with a 7" display, the main control enables communications among different racks. Customers can also make
some parameter settings and monitor the battery module status on it easily.
GCE HV BMS Characteristics: 1 | Advanced battery management system---The highly integrated battery management system can realize seamless monitoring. |
2 | Perfect self-checking and running status-checking function, with HMI display screen, system running information is clear at a glance. |
3 | Complete and reliable system control and protection strategies, comprehensively guarantee battery safety and escort to extend the life of battery packs. |
4 | Modular design, configurable and expandable---multiple energy storage units can be flexibly combined and expanded into a larger energy storage system. |
5 | Abundant communication interfaces---multiple RS485, CAN, Ethernet, dry contact input and output interfaces, supporting communication with most PCS and monitoring servers on the market. |
6 | The communication interface protocol is flexible---the factory comes with the company's communication protocol, and it can also be adapted to the PCS of different manufacturers according to customer needs. |
7 | The built-in large-capacity memory chip can store a large amount of key operating data, and an SD card can be added to realize battery historical data storage |
8 | Automatic circulation control and automatic parallel/offline control can easily realize the parallel connection of battery packs. |
High Voltage BMS Accessories: 12S-24S BMU(Slave) 12S-24S BMU has 8pcs of temperature sensors, Fan voltage 48V(17S-24S 12V), voltage detection range 0-5V,12V power supply, consumption less 20mA, CAN2.0 B communication | Wire harness- Signal acquisition wire 18 P+20P, 20P+22P, standard voltage&temperature sensor wire: 600/900/1200mm. Fan Power wire: 600mm | Wire harness- communication wire Standard Length: 180/300mm, connecting from the master BMS to each BMU with a cascade connection, the last port is for terminal resistance |
HV BMS Main Technical Parameters: Basic parameters | Max Current | 125A.160A(Optional) |
| Max voltage | 350V.600V(Optional) |
| Power consumption | ≤15W |
| Current sampling accuracy | 1%FSR |
| Insulation withstand voltage | 2800VDC <1mA 1min |
| Protection level | IP20 |
| (W*H*D)Dimension | 482*132*500(mm) |
| Net Weight | ~15Kg |
Communication Port | BMU Communication port with BMU | CAN |
UPS Communication port with UPS | RS485/CAN |
SBMS Communication port with SBMS | RS485/CAN |
Communication with monitoring software | Ethernet |
Basic Function | Battery charge&discharge Management | available |
Battery Temperature Management | available |
IAP IAP Upgrade | available |
System protection parameter setting | available |
Short circuit protection | available(20KA 20ms) |
Pre-charge function | available |
Parallel circulation control | available |
Event record | 5000 Available 5000pieces |
DC power Start | (,) |
available (battery-powered, municipal power as on |
/ off signal) |
Functions Optional | Insulation detection | 300V |
Applicable to system voltage >=300V |
HMI HMI display | 3.5 ()3.5 inches display (embedded inside the cabinet) |
Stand-alone or parallel function | Set up before leaving the factory |
Dry contact | 2 Maximum 2 dry contact outputs (optional) |
Appearance, Color | RAL9005 RAL9005 Black sand grain |
Installation method | 19 Suitable for standard 19-inch cabinet installation |
Incoming and outgoing line mode | Front side in and front side out. |
Operating ambient temperature | -20ºC~60ºC |
Operating ambient humidity | 5%~75%RH |
Comply with National standards | GB/T 16935.1 GB/T 17626.2 GB/T 17626.5 |
Safety Certification | CE Comply with CE certification standards |
HV BMS Applications:
-Battery Energy Storage System(BESS)
-Off-grid energy storage
-Data Center
-Grid frequency modulation energy storage
-Rack power/traction
-LFP UPS power supply
Company introduction:
Hunan Group Control Energy Technology Co., Ltd.(GCE) is a high-tech company specializing in the research and development of BMS and lithium battery peripheral equipment. The high-performance intelligent lithium battery management system produced by our company adopts the international leading technology, which greatly improves the battery management efficiency and prolongs the service life of lithium batteries. The advanced BMS control strategy avoids the difficulties and instability faced by most competitors for our BMS.
4S to 24s low voltage software BMS has a wide range of uses, rich product interfaces, strong scalability, and secondary development compatibility; 30s to 75s BMS adopts master-slave integrated design and relay solution to meet the lithium battery demand of multiple strings of small capacity batteries. Greatly reduce the use cost of users; 60s-270s adopts master-slave three-level architecture, which can meet the series and parallel requirements of high-capacity single lithium batteries within 1000V.
By mastering the core technology of BMS and inventing it on this basis, our company has developed a variety of lithium battery peripherals to meet the high-quality needs of the market.
FQAs about GCE HV BMS:- Q: Are you a manufacturer or simply a trading company?
A: We are a manufacturer, and we sincerely welcome you to visit our factory. - Q: Can I get some samples?
A: Yes, the sample order is available for quality checking and market testing. - Q: What kind of cells are applicable to this Battery Management System?
A: LFP, NMC, LTO - Q. How about the delivery time?
A: The lead time usually takes about 15 to 20 working days accordingly to the specification of your order and quantity. - Q. What are your terms of payment?
A: Advanced T/T is the main payment term, and other payment terms are negotiable. Please contact us, we'll discuss the details. - Q: What are your warranty terms?
A: We offer a 3-year warranty. - Q. Can you produce BMS with customization requirements?
A: Yes, based on the order quantity, we can make some small adjustments. - Q: How does your factory do regarding quality control?
A: Quality always comes first. All our products go through strict quality control processes from incoming material to the assembling process. Each product will be tested before packing & shipping. - Q: What Trade Terms are available?
A: No limitation on the trade terms. We usually do EXW for orders amounts smaller than 5000USD, and FOB for the best ones. Moreover, we can send BMSs via DHL&UPS&FEDEX quickly and easily. - Q: Is your BMS easy and convenient to install&test?
A: This is our 4th generation high voltage bms. It's an overall BMS solution, that is to say, you don't need professional technology to install our high-voltage BMS to form a complete battery system. - Q: What benefits do customers get?
A: Our high voltage BMS has complete battery charge and discharge control logic and balance function between batteries. We can also set various parameters of the system according to the actual needs of customers to ensure the stability, reliability, and efficient performance of the system.
Address:
Changsha County, Changsha, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Instruments & Meters, Metallurgy, Mineral & Energy
Company Introduction:
Hunan group control energy technology Co., Ltd. (GCE) is a high-tech company specializing in the research and development of BMS and lithium battery peripheral equipment. The high-performance intelligent lithium battery management system produced by our company adopts the international leading technology, which greatly improves the battery management efficiency and prolongs the service life of lithium batteries. The advanced BMS control strategy avoids the difficulties and instability faced by most competitors for our BMS. 4S to 24s low voltage software BMS has a wide range of uses, rich product interfaces, strong scalability, and secondary development compatibility; 30s to 75s BMS adopts master-slave integrated design and relay solution to meet the lithium battery demand of multiple strings of small capacity batteries. Greatly reduce the use cost of users; 60s-270s adopts master-slave three-level architecture, which can meet the series and parallel requirements of high-capacity single lithium batteries within 1000V. By mastering the core technology of BMS and inventing on this basis, our company has developed a variety of lithium battery peripherals to meet the high-quality needs of the market.