Full Automatic One Drag Two Disposable Flat Mask Production Line

After the main body machine outputs the mask body, the mask body sheet is conveyed to the turning mechanism by the conveyor belt structure, and the mask plate is flipped to the conveyor belt connected to the ear tape machine through the turning mechanism, and then the mask piece is conveyed to the ear tape machine through the conveyor belt. Above the first mask plate on the front, and finally put the mask sheet into the mask plate of the ear band machine by pressing down by the air cylinder, and then the ear band machine completes the welding of the ear band of the mask, edging and other actions to complete an ear band mask product. Production.
Technical Parameters:
(1) Equipment size: 7000mm (L) × 4500mm (W) × 1900mm (H) (excluding receiving line);
(2) Appearance color: international standard warm gray 1C (DB standard color), unless otherwise specified, follow this standard;
(3) Equipment weight: ≤5000kg, ground load ≤500KG / m2;
(4) Working power: equipment 220VAC ± 5 %, 50HZ, rated power about 9KW;
(5) Compressed air: 0.5 ~ 0.7 MPa, using flow rate of about 300L / min;
(6) Operating environment: temperature 10 ~ 35 ºC, humidity 5-35% HR, no flammable and corrosive gas, no dust (cleanness no less than 100,000)
(7) Production efficiency: 90-100PCS / MIN;
(8) Qualification rate of equipment production: 99%
(9) Equipment failure rate: 2% (refers to the failure caused by the equipment itself)