Feature: | Oxidative Degradable |
---|---|
Material: | Polycarbonates/PC |
Usage: | General Plastics, Engineering Plastics, Specialty Plastics |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Antistatic colorable/opaque FR PC grade
Product Description | ||||
Antistatic colorable/opaque FR PC grade | ||||
General | ||||
Form | ||||
Filler | ||||
Feature | Anti-Static Diffusive | |||
UL Yellow Card E207780-228454 | ||||
Uses | Industria | |||
Physical | Nominal Value | Test Method | ||
Specific Gravity | 1.21 | ASTM D792 | ||
Mold Shrinkage, Flow(1.5 - 3.2 mm) | 0.4 % | Method | ||
Mold Shrinkage, XFlow(1.5 - 3.2 mm) | 0.5 % | Method | ||
Melt Flow Rate[MFR](260 °C;2.16 kgf) | 19 g/10min | ASTM D1238 | ||
Mechanical | Nominal Value | Test Method | ||
Izod Impact, Notched(23 °C) | 700 J/m | ASTM D256 | ||
Tensile Stress, Yield(50 mm/min) | 52 MPa | ASTM D638 | ||
Flexural Stress, Yield(6.4 mm) | 80 MPa | ASTM D790 | ||
Flexural Modulus | 2030 MPa | ASTM D790 | ||
Tensile Strain, Break(50 mm/min) | 200 % | ISO 527 | ||
Thermal | Nominal Value | Test Method | ||
UL Recognized ≥ 1 mm ≥ 0.5 mm |
V-2 HB |
UL 94 | ||
Heat Deflection Temperature[HDT], Unannealed(1.82 MPa;6.4 mm) | 100 °C | ASTM D648 | ||
Electrical | Nominal Value | Test Method | ||
Surface Resistivity | 1.2E+12 ohms | ASTM D257 |
Processing | Nominal Value |
Drying Temperature<Injection> | 90 - 100 °C |
Drying Time<Injection> | 4 - 6 hrs |
Drying Time, Cumulative<Injection> | 8 hrs |
Maximum Moisture Content<Injection> | 0.04 % |
Melt Temperature<Injection> | 240 - 260 °C |
Nozzle Temperature<Injection> | 230 - 260 °C |
Front, Zone 3 Temperature<Injection> | 230 - 260 °C |
Middle, Zone 2 Temperature<Injection> | 220 - 255 °C |
Rear, Zone 1 Temperature<Injection> | 220 - 245 °C |
Mold Temperature<Injection> | 30 - 70 °C |
Back Pressure<Injection> | 0.3 - 0.7 MPa |
Screw Speed<Injection> | 40 - 70 rpm |
Shot To Cylinder Size<Injection> | 30 - 80 % |
Vent Depth<Injection> | 0.38 - 0.76 mm |