Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
Kingfa PBT-R912G15 is a Poly butylene Terephthalate (PBT) material filled with 15% glass fiber. It is available in Asia Pacific or North America for injection molding. Important attributes of Kingfa PBT-R912G15 are: Flame Rated Flame Retardant Heat Resistant High Strength Typical applications include: Electrical/Electronic Applications Appliances Lighting Applications |
||||
General | ||||
Form | Resin Pellets | |||
Filler | 15 % Glass Fiber | |||
Feature | Good Thermal | Low Extractables Good Electrical Properties | ||
UL Yellow Card | E171666-102315099 | |||
Uses | Appliance Components Lighting Applications Connector Electrical |
Bobbins | ||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.50 g/cm³ | ISO 1183 | ||
Molding Shrinkage, Across Flow | 1.2 % | ISO 2577 | ||
Molding Shrinkage, Flow | 0.60 % | ISO 2577 | ||
Water Absorption, Equilibrium(50% RH;23 °C) | 0.070 % | ISO 62 | ||
Rockwell Hardness, R-Scale | 118 | ISO 2039-2 | ||
Mechanical | Nominal Value | Test Method | ||
Tensile Stress | 95.0 MPa | ISO 527-2/10 | ||
Tensile Strain, Break | 3.4 % | ISO 527-2/10 | ||
Flexural Modulus(2 mm/min) | 5400 MPa | ISO 178 | ||
Flexural Stress(2 mm/min) | 145 MPa | ISO 178 | ||
Notched Izod Impact Strength(23 °C) | 6.2 kJ/m² | ISO 180 | ||
Thermal | Nominal Value | Test Method | ||
Heat Deflection Temperature, Unannealed | ||||
0.45 MPa | 215 °C | ISO 75-2/B | ||
1.8 MPa | 205 °C | ISO 75-2/A | ||
Flame Rating(3 mm) | V-0 | UL 94 | ||
Electrical | Nominal Value | Test Method | ||
Volume Resistivity | 1.0E+16 ohms ·cm | IEC 60093 | ||
Electric Strength, in Oil(2 mm) | 21 kV/mm | IEC 60243-1 |
Processing | Nominal Value |
Drying Temperature<Injection> | 120 - 140 °C |
Drying Time<Injection> | 4.0 - 6.0 hr |
Rear Temperature<Injection> | 220 - 250 °C |
Middle Temperature<injection> | 230 - 260 °C |
Front Temperature<Injection> | 240 - 270 °C |
Processing Temp, Melt<Injection> | 235 - 260 °C |
Mold Temperature<Injection> | 40 - 120 °C |
Injection Rate<Injection> | Moderate-Fast |
Suppliers with verified business licenses