After-sales Service: | One Years |
---|---|
Warranty: | One Years |
Application: | Wire Surface Derusting |
Fuel: | Electric |
Type: | Rotary Abrator |
Cleanliness: | High Cleanliness |
Customization: |
---|
Suppliers with verified business licenses
Ensuring the normal, safe and smooth working of the equipment must meet the following working conditions.
1.The workshop must have a ≥5T double hoist crane, the distance from the beam to the ground shall not be less than 6 meters.
2.Power supply:AC380V 50HZ Total power ~ 287KW
3.Equip with a 2m³, 0.8MPa air storage tank
4.No strong magnetic interference source around the workshop
5.Maintain the equipment according to the manufacturer's instruction
working principle for PMW5300 wire rod coil shot blasting machine
The equipment adopts the unique double "side hung gate + pin-ended "to carry the form of the wire rod, which is the patent product of our company (the patent number:(201520774091.4)operation adopt double-position form,bring two workpieces alternant working .
When the simple supported shaft of the wire rod enters the blasting room,which open the steel shot controller to covey steel shot to rotating impeller head,throw out the steel shot with high speed bade to hit wire rod with certain angles,which make its oxide, the Lin layer and its debris fall off. At the same time ,perform compound action "ups and down, right and left positive and negative rotation" by programmed program to beat the inside and outside surface of wire rod with steel shot effectively. The reasonable distribution of the 7 impeller head makes the whole wire rod without corners.
Product Parameters
Application range | fasteners,wire rope,spring,stainless steel,welding rod,cold-heading wire,etc. |
Production capacity | 70,000-150,000 each year |
Wire diameter | 5.5-42mm |
Equipment size | 16.8*12.4*5.8m(overground height) |
Wire loss | 0.2-0.3% |
Derusting cost | about15-35RMB/T |
Production efficiency | 4-10coils/per hour |
QPY5325 type wire rod shot blasting machine is a special equipment which cleaning wire rodm,which convert the kinetic energy of the steel shot in high speed flying into the impact force of workpiece surface to strip the oxide and impurities on base metal by using the plastic deformation of the base metal and its oxide, thereby cleaning the wire rod surface thoroughly.The rust removal level of surface after wire rod postprocessing reaches Sa2.0-2.5.
As the cleaning technology of this equipment,there is no chemical reaction , its byproduct is recyclable metal scrap, so this technology is green environmental protection and no pollution.It has the characteristics of economy, environmental protection and high efficiency compared with the traditional pickling method.Therefore, this equipment is widely used in the spring, bolt, welding rod, welding wire, steel wire rope,steel strand,etc. Which get more customers favor on smoggy day
Leader Wang / Jinan Pumingwei Electrical Equipment Co. Ltd
552 Gongye Er Road, Mingshui Street, Zhangqiu District, Jinan, Shandong, China
North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, Mid East, Eastern Asia, Western Europe
Suppliers with verified business licenses