1. Description:
Virgin & Recycled PP for extrusion and wiredrawing molding.
PP density is small, the strength stiffness and hardness are better than that of low pressure Polyethylene, with heat resistance.
PP has good performance and high frequency insulation, but low temperature time-varying crisp. It is Wear-resisting, easy to aging.
PP is suitable for making general machinery parts, corrosion parts and insulation parts.
The PP production of silk products has high tensile strength, low elongation, exterior smooth.
2. Application:
PP T30S mainly used for all kinds of knitting parts with silk, and also can be used in the production of Monofilament, tear film, injection molding production, etc.
Typical use: Woven bag, carpet backing.
Performance |
Test conditions [state] |
Test data |
Data unit |
Density |
|
0.9 |
g/m3 |
Melt flow rate |
|
10 |
g/10min |
Tensile yield strength |
|
25 |
Mpa |
Elongation at break |
|
≥600 |
% |
Notch impact strength |
23ºC |
8 |
kj/m2 |
Flexural modulus |
|
≥1000 |
Mpa |
Rockwell hardness |
|
90 |
R |
Load heat distortion temperature |
|
80 |
ºC |