After-sales Service: | Support |
---|---|
Warranty: | 3 Years |
Certification: | CE |
Condition: | New |
Customized: | Customized |
Automatic Grade: | Automatic |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Operating Procedures
1.before starting the machine, must cover the protective cover, check whether there are people and obstacles before and after the peeling machine.
2.open cover inspection must power off.
3.Before starting the machine, it is necessary to check whether the rotary knife and the die core meet the specifications of the stripping hose.
4.before starting, seriously testing rotating knife and the distance of the mold core, according to the measurement of the length of the coat, determine the work degree of rubber stripping, calculate the screw knife and rubber hose steel wire layer between the data, with similar specifications of the Angle of material under test strip first, try to peel tool setting, should from the large radial trail gradually adjusted, until clean rubber stripping, can work normally.
5.When the rubber stripping machine is in operation, if abnormal phenomenon is found, it should be stopped immediately and report the situation.
6.When the rubber stripping machine is in operation, the operator should keep the balance of the hose in his hand and not swing it up and down so as not to scratch the steel wire of the hose with the rotary knife.
7.the rotary knife must be fixed firmly, the knife shall not be too fierce, stripping work, do not remove the cutting strip by hand, so as to avoid danger.
8.No individual who has not been specially trained to do the job shall operate the machine.
9.Turn off the main power supply, clean up the work site, and keep the equipment and the ground clean and sanitary after the work is finished.
Different hose or fitting need different dies mold, like air suspension ring, air conditioning hose,brake hose,hydraulic hose,cable wire, steel pipe,steel wire rope and so on.So you can tell us what you need to crimp, then we make customize the dies mold regarding your products or requirements.
Item | Data |
Work range | Φ1/4" to 2" |
Matched knife bar | 1 set |
Matched core shaft | 10 sets or 15sets or 14sets |
Power | 1.5 KW |
Voltage | 220V/380 V |
Speed | 500 rolls/min |
Size (L×W×H) | 670×470×1060mm |
Standard weight | 60 KG |
A. Yes, we are a factory since 2000, which have more than 20 years experience on rubber hose production.
Q2. Do you produce embossed marking ?
A. Yes, we do provide embossed and printing markings with different color.
Q3. Can you produce product with my own brand?
A. Yes, it's available except famous brand which are not allowed.
Q4. What is the biggest size you can produce?
A.Hydraulic hose inner diameter size up to 304mm, industrial rubber hose inner diameter size up to 1300mm.
Q5. Is colorful hose available?
A. Yes, we can produce the hose color buy your requirements.
Q5.What is your payment terms?
A. 30% deposit, 70% before delivery.
Suppliers with verified business licenses