High Speed Pipe Cutting & Beveling Machine (All In One Machine)
I.Product performance features :
* On-line Performance: good (designed as per the on-line equipment of the production line)
* Cutting & Beveling Speed: ≤5Min /one pcs pipe cut off with two bevels (DN200 Sch40,CS) , shall be approx 12 pieces of pipe cut per hour and approx 100 pcs of pipe cut off per day under the normal working condition, as well can be change the speed and speed control. Proposal to you had better operation the machines with two personal, one is operation machines, the other one assist to hoisting pipes and assistant works.
* Bevel cutting: cutting off pipe and two bevels simultaneously.
* Bevel quality: good
* Cutting surplus: it is unnecessary so the material can be saved
* Mobility: low and stationery type
* Application:Used for cutting large amount of pipes dia not larger than 12"with standard wall thickness or thin wall thickness and beveling theV-shape bevel.
II.Product parameter
| Pipe diameter applicable |
DN50-300mm (O.D 60-325mm) |
| Pipe wall thickness applicable |
3-15MM |
| Materials applicable |
carbon steel, alloy steel, stainless steel and cryogenic steel |
| Bevel Shape and angle |
V and 30 °(adjust to bevel angle by different special tool bits) |
| Structure type |
a four column suspending structure is adopted. Since it is hollow, the pipe can goes into the machine directly and fixed there. The cutter rotates and cuts the pipe circumferentially with high speed |
| Cutting direction |
Radial |
| Driven by |
motor |
| Clamping system |
clamped by air cylinder or hydraulic cylinder |
| Control System |
PLC VF control of SIEMENS/OMRON and Touching Screen with man-machine interface of Mitsubishi |
| Tolerances of length |
±1mm |
| Length-Measuring system |
a mechanical Length-Measuring system could be provided if necessary so as to measuring the length of the pipes as well as cut and bevel themwith the supporting of the conveying system of the cutting and beveling machine |
| Mechanical aligning |
A mechanical lifting and lowering device is equipped to adjust automatically the center elevation of the beveling machine, so the pipes with different diameters get the same bottom elevation on the production line to get the pipes in/out of the machine easily |
| Conveying system |
Cutting and beveling VF conveying systems driven by motor are equipped at front and rear sides of the beveling machine if necessary |
III.Packing&shipping
We will provide professional export packaging and choose the appropriate mode of transportation, or we can follow the requirements of customers.
IV.After sale service
Professional technical support and product quality assurance.
V.Company introduction
Wincoo Engineering Co., Ltd (WINCOO) is engaged in bringing the most suitable solutions/equipments for client, fabricators, EPC/C companies on pipe fabrication, tank construction, pipeline construction,industrial production lines, clean energy project and other industrial field.
VI.Our Services & Strength
*We have ability of providing workable solutions to support clients to be awarded with shorter project execution time, fewer man-hour cost and higher efficiency construction/fabrication method and better quality during phase of project bidding.
*Based client's facility/site space availability, we are able to study/design and present matched configurations on project schedule, quality, cost and productivity to guarantee production pace is accordance with project requirement.
*To support project execution, we are ready to work as fireman to give prompt supply on project materials from different consumables, tools, equipments/machines to special merchandise. With flexibility, we are also glad to perform as procurement agent in China to seek required supply resources.
VII.Photos
Audited Supplier 
){kind=link}
){kind=link}