Factory Price Heavy Truck Part Engine Part Oil Pan Gasket for FAW

1.Sealing Performance: The primary function of the oil pan gasket is to ensure that engine oil does not leak. It provides an effective seal, preventing oil leaks between the oil pan and the engine, thus maintaining proper lubrication system operation.

2.Reduced Contamination: The oil pan gasket also prevents external impurities and dirt from entering the engine oil system. This helps to keep the engine's interior clean and extends the lifespan of the oil filter.

3.Preventing Gas Leaks: In addition to preventing liquid leaks, the oil pan gasket can also prevent gas leaks, such as engine exhaust gases or air pressure leaks, maintaining engine stability.
 

4.Extended Engine Life: By ensuring the engine oil system's sealing integrity, the oil pan gasket helps reduce friction and wear, thereby extending the engine's lifespan.

5.Lower Maintenance Costs: Proper functioning of the oil pan gasket can reduce the failure rate of the lubrication system, lowering maintenance and replacement costs.

6.Improved Performance: A well-functioning oil pan gasket ensures that the engine receives an adequate supply of lubricating oil to maintain normal operation and provide the required oil lubrication under high-performance or high-load conditions.
 

Installation Instructions:

1.Prepare Tools and Materials: First, ensure you have the right tools and necessary materials, including a new oil pan gasket, wrenches, torque wrench, bolts, nuts, oil pan, engine oil, work gloves, and safety goggles.

2.Lift the Vehicle: Use a jack to lift the front of the vehicle, ensuring it is securely supported on jack stands to provide enough working space.

3.Drain the Oil: Before replacing the oil pan gasket, drain the engine oil, usually done by opening the oil drain plug located beneath the oil pan. Ensure proper disposal of the used engine oil.

4.Remove the Oil Pan: Use a wrench or pneumatic tool to gradually remove the bolts securing the oil pan. Pay attention to the position and sequence of the bolts for correct reinstallation later.

5.Clean the Work Area: After removing the old oil pan gasket, thoroughly clean both the oil pan and the working surface on the bottom of the engine, ensuring there is no dirt, old sealant, or debris.

6.Install the New Oil Pan Gasket: Place the new oil pan gasket onto the working surface at the bottom of the engine, making sure it aligns correctly and lies completely flat.

7.Reinstall the Oil Pan: Securely reinstall the cleaned oil pan onto the new oil pan gasket and gradually tighten the bolts following the correct torque specifications. Typically, bolts need to be tightened evenly in a cross pattern to ensure uniform compression of the gasket.

8.Add Engine Oil: After completing the installation, add an appropriate amount of engine oil as per the vehicle manufacturer's recommendations.

9.Check for Leaks: Start the engine and let it run for a while, then park and check the underside for any oil leaks. If leaks are detected, a reinspection and resealing may be necessary.

10.Clean Up: Clear any remaining debris from the work area and ensure proper disposal of waste oil and the old oil pan gasket.

11.Lower the Vehicle: Gradually lower the vehicle using the jack until it is back on the ground, ensuring that both the jack and jack stands are safely removed.
 

Hangzhou Jiuxin Auto Trade Co., Ltd. was established on June 1, 2017. It is a subsidiary of Hangzhou FAW Spare Parts Co., Ltd. and specializes in the trading of spare parts for Chinese commercial vehicles. Its parent company, Hangzhou FAW Spare Parts Co., Ltd., has over 30 years of experience in auto parts. The company is located in Hangzhou, Zhejiang, approximately two hours' drive from both Shanghai and Ningbo ports. Currently, the warehouse covers an area of over 10,000 square meters, with over 60,000 SKUs covered. The company has a staff of over 100 people.

1. We supply parts to many truck exporting companies as our competitive edge. We have a large number of direct suppliers for you to choose from, whether they are original products or similar replacement products.
2. You can get FAW/HOWO/SHACMAN/DONGFENG/JAC spare parts at below market price.  
3. "One-stop foreign trade service": Quotation--Preparation--Delivery
4. With 10+year experience,we are proficient in parts business management process.
5. After getting your order, we will take pictures of every part for you. Even if you have 500 items.
6. With the heavy truck manufacturer's system, we can get accurate information based on chassis numbers and assembly nameplates with 95% accuracy.

Q1. What is your package of goods ?

A: Generally, we will pack the goods by Neutral boxes ,Pallets or Wooden boxes.  If any special needed ,please inform us earlier .

Q2. What the quality of your goods ?

A: We have different qualities, including Original, OEM, High copy, Copy, Refurbished and Second-hand. We can quote according to your real requirements and according to our experiences about your market requirements.

Q3. How do you make a price offer and how long is the validity period?

A: Generally we quote prices according to goods' part number , if you don't have , please provide us chassis number , we can confirm the exactly goods according to the chassis number. About the inquiry list, we usually finish the quotation within 24 hours . If you are very urgent ,please inform us earlier. The prices are valid within 20 days.

Q4. What is your terms of delivery?

A: EXW, FOB, CIF,CPT 

Q5. What is your delivery time?

A:  20GP normally 7 to 14 days , 40HC normally 13- 18 days after receiving prepayment. The exactly delivery time depends on the items and quantities which you ordered.

Q6: whats your advantages ?

1.We have more than 31 years truck parts experiences. We can provide professional suggestions to customers.
2.Strict and complicated inspection process .
3.Perfect After-sales service.
4.Reply on time.