Material: | FPM NBR HNBR Fvmq EPDM |
---|---|
Usage: | All Industries |
Type: | Haplotype |
Speed: | Speed |
Pressure: | Pressure Type |
Lip: | All |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Brief introduction of commonly used materials
Materials | Characteristics | Temperature |
NBR | It has good heat resistance, wear resistance, resistance to all kinds of lubricating oil, grease, oil and gas mixture, etc. | -30ºC~120ºC |
FKM | Aging resistance, heat resistance, oil resistance, almost suitable for all lubricating oil, fuel oil, gasoline, in the oil containing extreme pressure additives is not easy to harden, but cold resistance, high temperature wear resistance is poor, permanent compression deformation is large. | -20ºC~250ºC |
ACM | Oil resistance, heat resistance, wear resistance, ozone resistance, ultraviolet radiation resistance, especially the lubricating oil, gear oil, motor oil, oil, petroleum hydraulic oil, etc. | -30ºC~150ºC |
SR | It has outstanding high and low temperature resistance, which can be used for a long time at 150 degrees Celsius without performance change; it can be used continuously for 10000h at 200, and can maintain its unique use elasticity and ozone resistance and weather resistance in the working temperature range of-70~260. | -70ºC~260ºC |
PTFE | It has outstanding chemical stability, thermal stability, friction reduction and self-lubrication, and its cracking temperature is above 400. In addition to free fluorine and alkali metals, it has excellent corrosion resistance to chemicals, solvents, hydrogen and oxygen compounds and acids. | -70ºC~260ºC |
Q 1. What's the payment term?
A: We accept T/T 30% deposit and 70% balance against copy of B/L or L/C at sight, West Union,VISA,Paypal is also accepted.
Q 2. What is the normal lead time for product orders?
A: Average lead times for prototype / first article are 1-2 weeks, if tooling is involved, lead time for production tooling is 10 days, average production time after sample approval is 2-3 weeks.
Q 3. What is your standard packing?
A: All the goods will be packed by carton box and loaded with pallets. Special packing method can be accepted when needed.
Q 4. Could you please tell us the month capacity of your products ?
A: It depends on which model, we produce more than 3000 tons rubber materials per month.
Q 5. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
Suppliers with verified business licenses