4 AXIS SQUARE PIPE ROUND TUBE PLASMA CUTTING MACHINE
Product introduction:
Why Choose Us?
We own professional production workshop, can accept bulk orders and customized orders to meet the needs of different customers.
What you need to do? Just trust us!!!
No matter you need just cut pipe, just cut sheet, or just both pipe and sheet, different types can supply to you. So don't hesitate to contact and tell us your requests.
All square tube plasma cutting machine equipment is driven by Japanese Panasonic servo motor, with high control accuracy. The no-load efficiency can reach 12 meters per minute, and the cutting can reach 2 meters per minute when cutting. This is only a conclusion drawn by referring to the Powermax 105 power supply and the pipe wall thickness of 7mm. The final efficiency is determined by the pipe diameter, wall thickness and processing technology.
Technical parameters
| cutting graphics |
All kinds of plane figure |
| cutting speed |
0-4000mm/min |
| round tube speed |
0-4000mm/min |
| Cutting method |
Plasma /flame |
| Cutting Diameter |
220*220mm |
| Cutting thickness |
Flame :6-200mm,
Plasma :1.5-20mm(according to the plasma power supply) |
| Thickness of circular tube |
Flame :6-80mm,plasma1-20mm
(according to the plasma power supply) |
| Max tube diameter |
0-250mm(can be customized ) |
| Cutting length |
According to different machine size |
| cutting precision |
±0.5mm |
| NC programming |
Support AUTOCAD/TYPE3/CAXA/SOLIDWORKS etc. |
| file transfer |
U disk |
| power supply voltage |
220V 50HZ /plasma:380V |
| work environment temperature |
temperature:-10ºCto +60ºC,
relative humidity:0-95%No condensation |
Major Configurations
Plasma torch and Rotating shaft Automatic pneumatic chuck tube plsama cutting machine
The fully automatic pneumatic chuck can align materials by itself, reducing the time spent by workers to go to the calibration center.
Advantage: Pneumatic chuck, dual driver
Pneumatic chuck is more smart, it can open and fix pipe by switch automatic, easy to confirm the center place than normal chuck. The fully automatic pneumatic chuck can align materials by itself, reducing the time spent by workers to go to the calibration center.
It not only can cut square pipe, also can cut round pipe, rectangular tube etc. Besides, it not only can cut square pipe surface, also can cut pipe angle.
There is automatic chuck and manual chuck to option.
Dual drive is more strong power to make front and behind chuck rotate in same frequency to avoid smaller pipe be twisted when working to confirm cutting precision. Two chucks can work at same time, what is to confirm cutting precision.
Power source
Hypertherm 45A power supply
Can cut up to 8mm thickness, optional power supply with equal capacity - LGK 63A power supply
Control system
FL - FX 430A Control systemA professional control system for pipe cutting, round tube, square pipe, L profile etc. Inset design and nesting software.
Servo Motor
Chine Leadshine servo motor and Japan Yaskawa/Panasonic servo motor are to option.
Automatic pneumatic chuck FX430A Control system
Bilateral drive Hypertherm powermax 45A
Application
Sanitary industry: water pipes, plumbing fittings, shower pipes, etc. Air-conditioning industry: pipes for heat exchange, pipes for piping, and pipes for connectivity. Automotive industry: auto parts pipes, exhaust pipes (car tail pipes) and radiator pipes. Furniture industry: sofa legs, tables and chairs, iron frame beds, etc. Pipe cutting of household hardware, kitchenware, sanitary ware, sports equipment, stainless steel door handles, handrails and other industries.
Cutting raw materials: Round tube, square tube, rectangular tube. If cutting channel steel, angle steel, etc., some functions need to be added.
"High Quality, Good Service" is our COMPANY CULTURE!
Packaging Details:
Packing:plywood case after packed by Wrapping film
Delivery Detail:
within 15 working days after recieved the deposit
Audited Supplier 
){kind=link}
){kind=link}