The grey eagle all-in-one machine remote metal detector uses a deep and long-distance metal detection system, namely the precious metal directional indicator. Its characteristic is ultra deep and large-area rapid scanning detection, with a detection area of a few minutes equivalent to the long-term workload of a regular metal detector.
Product parameter configuration:
Product model: Grey Eagle all-in-one machine
Scope of use: outdoor exploration, archaeology, treasure hunting
Detection depth range: 1-20M
Detection range: 1-1200M
Rechargeable lithium battery: working continuously for more than 10 hours
Voltage: DC12.6V
Temperature range: -10 ° C -+50 ° C
Weight: 1.9KG
Detectable metal types: gold, Yuan Datou, copper mirror, diamond (auxiliary), selecting gold means scanning the gold (if the object is too large, it will affect the machine)
Specific functions:
It can accurately determine the burial position of objects through fixed points and can locate them.
It can also rely on a frequency regulator to identify the specific type of metal.
Specific operations:
After receiving the machine, it is necessary to charge it first. Both the transmission box and receiver need to be charged (because the built-in batteries of the transmission box and receiver have been discharged during transportation, consuming a lot of electricity). If not charged, due to insufficient electricity, the transmission and reception signals may weaken, leading to the machine being unusable.
The normal charging time is 5-8 hours.
After being fully charged, we can operate the machine. Taking scanning gold as an example, turn on the power switch of the transmission box and receiver. At this time, the scanning light on the receiver will flash. At the same time, when we press the gold button on the transmission box, we will find that the corresponding indicator light for the gold element on the receiver will light up; At this point, we need to use the pointer of the receiver to receive the ferrous metal, for about 10 seconds, in order to eliminate the magnetism of the receiver. Then, we take off the phone and necklace that can send signals from our body and put them aside; This is done to eliminate the interference of metal on the receiver. Afterwards, we hang the transmission box around our waist and hold the receiver in our hands. When holding the receiver, we must maintain its balance to ensure that it does not spin around due to our own lack of balance. After ensuring the balance of the receiver, we can start scanning at a constant speed in a certain direction. During the scanning process, we still need to maintain the balance of the receiver while paying attention to the indication of the receiver pointer. When the receiver pointer receives a signal from underground gold, it will start to rotate, rotating in the direction of the signal from the gold. If the gold is too small, the pointer may show slight rotation or even no rotation. If there is rotation and the rotation amplitude is large, we can roughly determine the direction of gold, which is the direction pointed by the pointer. This also requires 2-3 confirmations.
){kind=link}
){kind=link}