| Type: | EP150 |
|---|---|
| Material: | Steel |
| Inside Material: | Polyester |
| Samples: |
EP/ST/SW/SIDEWALL/ROUGH TOP
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
1.Fabric Conveyor Belt |
Fabric conveyor belts are suitable for medium and long distance, heavy load and high
speed transportation of materials, which is widely used in mines, metallurgy, architecture,
ports, electricity, chemical industries, etc.
NN fabric
- High stability
- Short pulley diameter
- High heat resistance
- Strong anti-shock
- Excellent adhesive force to rubber
EP fabric
- Low elongation
- Strong anti-shock
- Excellent adhesive force to rubber
- High stability
- Temperature≤140ºC
(It will decompose over 140ºC)
| Specifications and technical parameters of EP conveyor Belt | ||||||||||
| Fabric type | Fabric construction | Fabric type | Rubberized fabric thickness | Strength series(N/mm) | Covering rubber thickness(mm) |
Width range(mm) | ||||
| through | weft | 2layer | 3layer | 4layer | Top covering adhesive | Lower covering compound | ||||
| EP | EP | Cotton fiber | EP-80 | 1 | 160 | 240 | 320 | 0-12 | 0-10 | 300-2500 |
| EP-100 | 1 | 200 | 300 | 400 | ||||||
| EP-125 | 1.05 | 250 | 375 | 500 | ||||||
| EP-150 | 1.1 | 300 | 450 | 600 | ||||||
| EP-170 | 1.1 | 340 | 510 | 680 | ||||||
| EP-200 | 1.2 | 400 | 600 | 800 | ||||||
| EP-250 | 1.4 | 500 | 750 | 1000 | ||||||
| EP-300 | 1.6 | 600 | 900 | 1200 | ||||||
| EP-350 | 1.7 | 1050 | 1400 | |||||||
| EP-400 | 1.9 | 1600 | ||||||||
| EP-500 | 2.1 | 2000 | ||||||||
| Adhesive strength and elongation | |||||
| Core material | Adhesion strength | Elongation property | |||
| Interlayer | Overburden and cloth layer N/mm | Longitudinal Full Thickness | Longitudinal Full Thickness | ||
| N/mm | Overburden thickness ≤1.5mm | Overburden thickness ≥1.5mm | Elongation at break | Reference elongation | |
| Polyester canvas | ≥5 | ≥4.5 | ≥5 | ≥10% | ≤4% |
| Overlay Performance of Adhesive Tape | |||||
| Overlay Level | tensile strength | Elongation at break | Wear volume | Change rate of tensile strength and elongation at break after aging | |
| Mpa | Kgf/cm² | % | mm³ | % | |
| H | 24 | 240 | 450 | 120 | -25 ~ +25 |
| D | 18 | 180 | 400 | 100 | -25 ~ +25 |
| L | 15 | 150 | 350 | 200 | -25 ~ +25 |
--Flame Resistant Fabric Conveyor Belt for General Use |
It's especially used in aboveground coal washeries, power plants, and non-coal underground mining. The safety meets GB10822.
The product is made of nylon canvas or EP canvas and finished through the processes of calendering, assembling, vulcanizing, etc. The unique formula enables it to work continuously in a flammable environment.
| Grade | Tensile strength min (ISO37) Mpa |
Elongation at break min (ISO37) % |
Abrasion Max. (IS04649) mm |
| D | 18 | 450 | 200 |
| L | 14 | 400 | 250 |
| Items | Flame resistant grade | |
| K2 | K3 | |
Duration of flame |
The total duration of flame of 6 test pieces with covers is less than 45S,any individual test piece does not exceed 15 S |
Average value of duration of flame of 3 test pieces with covers does not exceed 60S |
| Anti-static property | ≤3×108Ω | |
Reapperance |
There should be no reappearance of flame on any test piece |
|
Heat Resistant, High Temperature Resistant Fabric Conveyor Belt |
It is suitable for conveying high temperature solid materials like sintering ore, coke, cement clinker, etc. which is used in metallurgical, cement, chemical industry and so on.
Developed new structure carcass materials will reduce the strength loss of heat aging during running, and thus will extend the working life.
The cover uses superior ethylene-propylene rubber or halogenate rubber which will enhance the high temperature resistant property of the rubber and reduce the loss of heat aging.
| Item | GB20021Standard | ZHENXING Standard | |||||
| T1 | T2 | T3 | T4 | DAHR150 | DAHR180 | ||
| Test temperature | |||||||
| ≤100ºC | ≤125ºC | ≤150ºC | ≤175*ºC | ≤150*ºC | ≤180ºC | ||
| Permitted change range | |||||||
| Hardness | Difference before and after aging | +20 | +20 | ±20 | ±20 | ±10 | ±10 |
| Maximum after aging | 85 | 85 | 85 | 85 | 75 | 75 | |
| Tensile strength |
Change rate of property % | 25 | 30 | 40 | 40 | ±15 | ±25 |
| Minimum value after aging | 12 | 10 | 5 | 5 | 10 | 8 | |
| Elongation at break |
Change rate after aging % | 50 | 50 | 55 | 55 | ±15 | ±15 |
| Minimum value after aging | 200 | 200 | 180 | 180 | 400 | 350 | |
Oil Resistant Fabric Conveyor Belt |
Oil resistant conveyor belts select the NBR with excellent oil resistant properties as the covers. The reinforced materials can be selected according to customers' requirements. It's suitable for conveying oily materials or the environment that exposure to a variety of working oil.
Low rate of volume change
High maintenance of strength
Wide application ranges
| Type | Rubber material | Permissible temperature ºC |
Application areas |
| COR | NBR/BR | 35~70 | Conveying products containing animal and vegetable oil and fat in cold areas |
| MOR | NBR/SBR | -20~70 | Most products containing animal and vegetable oil and fat |
| OR | NBR | 20~70 | Products containing mineral oi |
| HOR | NBR | 20~120 | Hot asphalt |
Anti-tear Fabric Conveyor Belt |
It's suitable for transportation of hard and sharp materials in larger drop height occasions, used in lines of mines, ports, electricity, metallurgy, chemical industry, coalmines, etc.
The anti- tear conveyor belt has highly extensible transverse polyester or nylon canvas evenly arranged in the top cover (or both top and bottom cover) of the steel cord carcass. The anti-tear layer is perpendicular to the running direction of belt. When the belt conveys hard and sharp materials, the anti-tear layer can stop it from being pierced. Even if the belt is pierced, the anti-tear layer can still prevent it from being torn.
In accordance with ISO15236-2016 standard
| Grade | Tensile strength min (ISO37) Mpa |
Elongation at break min (1SO37) % |
Abrasion Max. (IS04649) mm3 |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
| Ka | 15 | 350 | 200 |
| Note:Ka for flame-resistant and anti-static belts in accordance with ISO340 and ISO284 | |||
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Cold Resistant Fabric Conveyor Belt |
Fabric cord resistant conveyor belts are suitable for conveying materials outdoors in freezing area, cold storage and etc.
The product selects nylon canvas or EP canvas as carcass. Cover rubber selects a blend of NR and BR, which has the properties of high elasticity, shock resistance, cold resistance and etc. It can work normally under the conditions of -60oC.
Cover Grades
| Grade | Tensile strength min (ISO37) Mpa |
Elongation at break min (ISO37) % |
Abrasion esistance max. (1S04649) mm |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
| Tensile cold-resistant coefficient C1(-45ºC) |
≥0.3 | ||
| lensile cold-resistant coefficient C2(-50ºC |
≥0.2 | ||
| Note:C1-working temperature-45ºC~60ºC;C2-working temperature-60ºC~60ºC | |||
Straight Warp Conveyor Belt |
Straight warp conveyor belts are suitable for conveying materials in larger drop height, high
load and high speed occasions, which are widely used in mines, ports, electricity, etc.
Thin carcass:
Replacing the multilayer structure with 1 or 2 plies, which will reduce 7%~17% of the full thickness
and improve sinuosity, making the belt running well with the smaller pulley, and the single roll length
will be 400~500 to reduce loss.
High strength:
With the special weaving method of high denier fiber, the tensile strength of the fabric layer will be
improved, and the working elongation of the conveyor belt will be reduced.
Excellent toughness:
The special structure of straight wrap can absorb impact better than ordinary EP or NN fabric, which
will extend the service life of the belt.
| Type | Ply | Strength N/mm |
| SW500 | 1 or 2 | 21000 |
| SW630 | 1 or 2 | 21250 |
| SW800 | 1 or 2 | 21600 |
| SW1000 | 1 | 22000 |
| SW1250 | 1 | 22500 |
| SW1400 | 1 | 22800 |
| SW1600 | 1 | ≥3200 |
In accordance with ISO14890-2013 standard
| Grade | Tensile strength min. (1S037) Mpa |
Elongation at break min. (ISO37) % |
Abrasion max (IS04649) mm |
| H | 24 | 450 | 120 |
| D | 18 | 400 | 100 |
| L | 15 | 350 | 200 |
The values will help to determine the appropriate cover compound for the application or for the materials carries. Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Straight Warp Conveyor Belt |
Combined with high strength, lightweight materials and multifunction cover materialse
aramid conveyor belt are suitable for various application areas.
Low energy consumption
The structure of straight warp and straight weft consists of aramid cords in warp and nylon cord in weft in both sides which will protect the belt. The lightweight aramid conveyor belt can reduce the power consumption of the conveyor.It will save more energy by using energy-saving rubber with low rolling resistance as the pulley side.
Impact resistance
As the toughness of aramid fabric can protect the conveyor belt from being punctured by sharp conveying materials. It can also reduce the damage of the conveyor belt even if in high drop distance.
High heat resistance and flame resistance
High heat resistance property will protect the conveyor belt from being damaged by conveying materials with high temperature. Even the burning substance is not easy to penetrate the aramid core.
Anti-corrosion
Aramid, as the man-made fabric itself is superior resistant to media. Otherwise, it has excellent properties in chemical resistance and corrosion resistance.
Optimized belt design for a long lifetime
As there's single fabric ply only, the carcass is light and flexible with optimum strength utilization. Aramid conveyor belts are excellent in fatigue resistance throughout their lifetime. Top and bottom cover meet high demands on wear and impact resistance,which provides the optimum protection for the valuable aramid.
| Specifications | Longitudinal tensile strength (N/mm) |
Min transverse tensile strength (N/mm) |
10%load elongation (max.) |
Coyers standard (mm) |
Belt thickness (mm) |
Belt weight (Kg/m2) |
| DPP800 | 800 | 150 | 0.5 | 6+2 | 11.5 | 11.0 |
| DPP1000 | 1000 | 150 | 0.5 | 6+2 | 11.5 | 11.1 |
| DPP1250 | 1250 | 150 | 0.5 | 6+2 | 11.6 | 11.3 |
| DPP1600 | 1600 | 180 | 0.5 | 6+3 | 12.0 | 12.9 |
| DPP1800 | 1800 | 180 | 0.5 | 6+3 | 12.3 | 13.1 |
| DPP2000 | 2000 | 180 | 0.5 | 8+3 | 14.5 | 15.9 |
| DPP2250 | 2250 | 180 | 0.5 | 8+3 | 14.5 | 16.1 |
| DPP2500 | 2500 | 200 | 0.5 | 8+3 | 14.6 | 16.3 |
| DPP3150 | 3150 | 200 | 0.5 | 8+3 | 16.3 | 17 |
PIPE Fabric Conveyor Belt |
Fabric pipe conveyor belt is a new type of conveying belt which uses EP/NN as carcass, high elastic, high anti-abrasive and high strength rubber as working surface. It's mainly used in conveying materials which are easily polluted like power, granular materials, etc. when working, the rubber belt changes its form from flat to U shape and finally to pipe, folding the materials and realizing the process of enclosed conveying.
Enclosed conveying of materials, protecting both the materials and the environment.
Steep angled conveying, the conveying angle can reach 30° usually.
Conveying line can be arranged according to the curve of space.
| Strength (KN/m) |
No of plies |
CarcasS type |
Belt width(mm) | ||||||||||||||||
| 300 | 400 | 500 | 600 | 750 | 800 | 930000 | 1000 | 1050 | 1200 | 1400 | 1600 | 1800 | 2000 | 2200 | 2400 | 3000 | |||
| 160 | 2 | NN/EP | |||||||||||||||||
| 250 | 2~3 | NN/EP | |||||||||||||||||
| 315 | 2~4 | NN/EP | |||||||||||||||||
| 400 | 2~4 | NN/EP | |||||||||||||||||
| 500 | 2~5 | NN/EP | |||||||||||||||||
| 630 | 3~6 | NN/EP | |||||||||||||||||
| 800 | 3~6 | NN/EP | |||||||||||||||||
| 1000 | 3~6 | NN/EP | |||||||||||||||||
| 1250 | 3~6 | NN/EP | |||||||||||||||||
| 1400 | 3-6 | NN/EP | |||||||||||||||||
| 1600 | 4~6 | NN/EP | |||||||||||||||||
| 2000 | 4~6 | NN/EP | |||||||||||||||||
| 2500 | 5~6 | NN/EP | |||||||||||||||||
| 3150 | 5~6 | NN/EP | |||||||||||||||||
| Nominal pipe diameter mm |
φ150 | φ200 | φ250 | φ300 | φ350 | φ400 | φ500 | φ600 | φ700 | φ800 |
| Width mm | 600 | 800 | 1000 | 1100 | 1300 | 1600 | 1850 | 2250 | 2450 | 2800 |
In accordance with HG4224-2011 standard
| Grade | Tensile strength min. Mpa |
Elongation at break min. % |
Abrasion Max. mm² |
| H | 25 | 450 | 120 |
| D | 18 | 400 | 90 |
| T1/T2 | 10 | 300 | 200 |
| Ozone resistant test condition:50pphm,40±2ºC,elongation:20%,time 96hours,no cracks T1-heat resistant 100C work condition,T2-heat resistant 125Cwork condition |
|||
The values will help to determine the appropriate cover compound for the application or for the materials carries
Reliable assessment of the behavior of the covers in service for wear and cut resistance cannot be determined from tensile strength, and abrasion values alone.
Acid-Alkaline Resistant Fabric Conveyor Belt |
Suitable for conveying materials with chemical corrosiveness in chemical factories, chemical fertilizer factories, paper mills, mining industries, etc.
Selecting nylon canvas or EP canvas as the carcass, the belt has good elasticity and excellent troughability. The rubber cover, which is made from acid- alkaline resistant materials, has great anti-chemical corrosiveness and good physical properties.
| tems | Tensile strength Mpa |
Elongation and break % |
Abrasion mm3 | Hardness |
Qzone deterioration |
||
| Cover | Physical properties | e14.0 | ≥400 | s250 | 55-70 | No cracks | |
| Acid and Alkali resistance |
Class | Soak liquid |
Density | Soak conditions Cxh |
Change rate before and after soaking |
||
| Swelling rate |
Change rate of tensile strength |
||||||
| A1 | HCL | 18% | 50°ºC×96h | <+10% | ≤-10% | ||
| A2 | H2SO4 | 50% | 50°ºC×96h | <+10% | <-10% | ||
| A3 | NaOH | 48% | 50°ºC×96h | <+10% | <-10% | ||
Chevron Conveyor Belt |
| 4.STEEL CORD CONVEYOR BELT (Steel Wire Rope Core Rubber Conveyor Belt) The steel wire rope core conveyor belt is a rubber conveyor belt with steel wire as its skeleton. It has the advantages of high tensile strength, good impact resistance, long service life, small use elongation, good grooving, good flexibility resistance, and is suitable for long-distance, large-distance and high-speed conveying materials. The product is composed of core glue, wire rope, covering layer and side glueaterials. |
| Characteristic: 1,High allowable strength and high safety factor; 2,Minimal elongation, short stretching distance; 3,The steel wire rope is firmly bonded with rubber and has excellent dynamic performance; 4,Soft belt body, good grooving, good linear operation; 5,Excellent impact resistance; 6,Reliable joint, long service life. |
| Main Technical Parameters of Steel Wire Core Conveyor Belt in Germany | |||||||||||||||
| project | Number of wire rope roots | Width specification/mm | |||||||||||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | ||||||||
| Minimum Tensile Strength N/mm | Wire rope diameterd(maximum) | Rope distance±1.5mm | Covering glue thickness (minimum) | width | |||||||||||
| Width specification/mm | |||||||||||||||
| ±5 | ±7 | ±8 | ±10 | ±10 | ±12 | ±12 | ±14 | ||||||||
| St1000 | 1000 | 4.1 | 12 | 4 | 39 | 51 | 64 | 81 | 97 | 114 | 131 | 147 | |||
| St1250 | 1250 | 4.9 | 14 | 4 | 34 | 44 | 55 | 69 | 84 | 98 | 112 | 127 | |||
| St1600 | 1600 | 5.6 | 15 | 4 | - | - | 50 | 64 | 77 | 90 | 104 | 117 | |||
| St2000 | 2000 | 5.6 | 12 | 4 | - | - | 64 | 81 | 97 | 114 | 131 | 147 | |||
| St2500 | 2500 | 7.2 | 15 | 5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St3150 | 3150 | 8.1 | 15 | 5.5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St3500 | 3500 | 8.6 | 15 | 6.5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St4000 | 4000 | 8.9 | 15 | 7 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| Performance Grade of Covering Rubber | |||
| Grade code | tensile strength,Mpa≥ | Elongation at break,%≥ | Wear volume,mm³≤ |
| D | 18 | 400 | 90 |
| H | 25 | 450 | 120 |
| L | 20 | 400 | 150 |
| P | 14 | 350 | 200 |
| notes: D-Strong Wear Working Conditions;H-Strong splitting working conditions;L-General working conditions |
|||
| P-Oil-resistant, heat-resistant, acid-alkali-resistant, cold-resistant and general non-flammable conveyor belts | |||
| Performance Grade of Covering Rubber | |||
| Executive standard DIN22131standard | |||
| Performance grade | tensile strength | Tensile ratio at break | Wear volume |
| <=mm³ | |||
| W | 18 | 400 | 90 |
| X | 25 | 450 | 120 |
| Y | 20 | 400 | 150 |
| K* | 20 | 400 | 200 |
| notes:*Suitable for general flame retardant conveyor belt conforming to DIN22103.Its covering glue meets the requirements of DIN22104. | |||
| 5.Heat Resistant CONVEYOR BELT (HR,EPDM,SBR+EPDM) The core of the product is polyester canvas with high modulus, low shrinkage and high breaking strength. The covering rubber is made of ethylene propylene diene monomer or chlorinated butyl rubber with good high temperature resistance. It is refined with high temperature resistant materials in conformity with forming and vulcanizing processes. After special impregnation and setting treatment, the product has high bonding strength, small elongation deformation and excellent abrasion performance under normal service conditions below 180 C. Mainly used in metallurgy, construction and other industries, transport sinter, coke, cement clinker and other high-temperature materials. |
| Physical property indexes | |||||
| project | category | ||||
| T1 | T2 | T3 | T4 | ||
| Test temperature | |||||
| ≤100ºC | ≤125ºC | ≤150ºC | ≤175ºC | ||
| Permissible range of change | |||||
| hardness | Difference between post-aging and pre-aging | 20 | 20 | ±20 | ±20 |
| Maximum after aging | 85 | 85 | 85 | 85 | |
| tensile strength | Performance change rate/% | -25 | -30 | -40 | -40 |
| Minimum post-aging value/Mpa | 12 | 10 | 5 | 5 | |
| Elongation at break | Post-aging change rate/% | -50 | -50 | -55 | -55 |
| Minimum value after aging/% | 200 | 200 | 180 | 180 | |
| 6.Fire Resistant CONVEYOR BELT (K2,K3) This product is refined from polyester canvas and nylon canvas through calendering, forming and vulcanizing processes. This product is suitable for conveying non-corrosive, non-spiky, bulk, granular and powder materials, such as coal and other bulk or finished goods, in the upper inflammable and explosive environment of coal mines. |
| Overlay Performance | |||
| project | Company | level L | level D |
| tensile strength | Mpa | ≥14 | ≥18 |
| Elongation at break | % | ≥400 | ≥450 |
| Safety performance | ||
| project | Flame Retardant Grade | |
| K2 | K3 | |
| Flame duration | The total flame duration of six coated specimens is not more than 45s, and any single value is not more than 15s. | The average flame duration of three coated specimens is not more than 60 s. |
| Electrostatic conductivity ≤3*10 8Ω | ||
| Reburning property | No flame shall reappear on any specimen | |
| 7.High Abrasion Conveyor Belt Through the measures of lightweight conveyor belt body, increasing rubber elasticity and reducing rubber friction coefficient, the operation resistance of conveyor device to belt surface during conveyor belt operation can be greatly reduced, and reasonable transmission friction coefficient can be obtained, which can save electricity by 10-15%.The effect. The surface coating has high elasticity and excellent wear resistance, which makes the conveyor belt wear-resistant, impact-resistant and prolongs its service life. It is suitable for medium and long distance material transportation in mining, wharf, electric power, metallurgy, chemical industry, coal and other industries. Product characteristics: It saves electricity, does not need equipment modification and has high safety factor. |
| 8.Oil Resistant CONVEYOR BELT Oil Resistant Belt The nylon canvas and polyester canvas are refined by calendering, forming and vulcanizing processes. They have good oil resistance and are suitable for oil-containing materials in conveyor belts and occasions where oil and chemical solvents may occur. Specifically, it has the advantages of low volume change rate, high strength and wide application range. |
| Technical index | ||
| 1. Oil-resistant conveyor belts can be divided into wear-resistant type (D) and general type (L) according to their covering properties. | ||
| 2. Oil resistance can be divided into Y1 and Y2 grades. |
| 9.Anti Tear CONVEYOR BELT |
| 10.Akli-Acid Resistant Belt it is a kind of inert material which is suitable for working environment in contact with acid and alkali, such as phosphate fertilizer manufacturing, seawater salt drying, covering rubber and plastic blending and filling with excellent acid and alkali resistance. |
| Technical indexes | |||||||
| project | tensile strength/Mpa | Elongation at break% | Wear volume/mm³ | hardness/Ao | Ozone aging | ||
| Cover gum | physical property | Before aging | ≥14.0 | ≥400 | ≥250 | 55-70 | No crack |
| After aging | ≥12.0 | ≥340 | -- | 60-75 | -- | ||
| Acid and alkali resistance | category | Soaking solution | concentration | Soaking condition | Performance change rate before and after soaking | ||
| Volume Expansion Rate | Tensile Strength Change Rate | ||||||
| A1 | hydrochloric acid | 18% | 50ºC×96h | +10%Following | -10%within | ||
| A2 | sulphuric acid | 50% | 50ºC×96h | +10%Following | -10%within | ||
| A3 | sodium hydroxide | 48% | 50ºC×96h | +10%Following | -10%within | ||
| Test conditions:Ozone concentration(50±5)*10(volume fraction),temperature(40±2)ºC,elongation(20±2)%,time15h | |||||||
| 11.Filter belt |
| 12.Pipe Conveyor Belt |
Pipe Conveyor Belt refers to the conveyor belt matched with the circular pipe belt conveyor, which forms the shape of a circular pipe in the whole or part of the transportation line by means of external force.Pipe Conveyor Belt,the core body is composed of high strength canvas or steel wire rope, high strength, high wear resistance and high quality rubber as upper and lower covering layer. When working, the tape gradually changes from plane to U shape, and finally rolls into tubular shape to implement closed conveying. |
| Technical parameters of Pipe Conveyor Belt | ||||
| pipe diameter/mm | bandwidth/mm | Breaking strength | Fabric layer | Covering glue thickness/mm |
| N/mm | ||||
| 100 | 430 | 250 | 1 | 3.0×1.5 |
| 150 | 600 | 160 | 2 | 3.0×2.0 |
| 315 | 2 | 3.0×2.0 | ||
| 200 | 750 | 500 | 2 | 3.0×2.0 |
| 315 | 2 | 3.0×2.0 | ||
| 500 | 2 | 5.0×2.0 | ||
| 250 | 2 | 5.0×2.0 | ||
| 250 | 1000 | 400 | 2 | 3.0×2.0 |
| 500 | 2 | 3.0×2.0 | ||
| 400 | 2 | 5.0×2.0 | ||
| 500 | 2 | 3.0×2.0 | ||
| 300 | 1100 | 400 | 2 | 3.0×2.0 |
| 500 | 2 | 3.0×2.0 | ||
| 400 | 2 | 3.0×2.0 | ||
| 500 | 2 | 5.0×2.0 | ||
| 350 | 1300 | 630 | 3 | 5.0×2.0 |
| 800 | 4 | 5.0×2.0 | ||
| 400 | 1600 | 800 | 4 | 5.0×2.0 |
| 1000 | 5 | 5.0×2.0 | ||
| 13.Rough Top Conveyor Belt Rough top belt can be used for tilt angleLight materials such as bags, boxes and parcels are transported at 35 degrees angle. The top rubber surface is wear-resistant and skid-resistant rubber. It has the functions of cushioning, shock absorption and stabilization for material transportation, especially anti-skid. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}