| Type: | EP200 |
|---|---|
| Material: | Rubber |
| Inside Material: | Polyester |
| Samples: |
EP/ST/SW/SIDEWALL/ROUGH TOP
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier | 1.EP CONVEYOR BELT EP conveyor Belt is widely used in coal, mine, port, metallurgy, electric power, chemical industry and other fields to transport materials. |
| Specifications and technical parameters of EP conveyor Belt | ||||||||||
| Fabric type | Fabric construction | Fabric type | Rubberized fabric thickness | Strength series(N/mm) | Covering rubber thickness(mm) |
Width range(mm) | ||||
| through | weft | 2layer | 3layer | 4layer | Top covering adhesive | Lower covering compound | ||||
| EP | EP | Cotton fiber | EP-80 | 1 | 160 | 240 | 320 | 0-12 | 0-10 | 300-2500 |
| EP-100 | 1 | 200 | 300 | 400 | ||||||
| EP-125 | 1.05 | 250 | 375 | 500 | ||||||
| EP-150 | 1.1 | 300 | 450 | 600 | ||||||
| EP-170 | 1.1 | 340 | 510 | 680 | ||||||
| EP-200 | 1.2 | 400 | 600 | 800 | ||||||
| EP-250 | 1.4 | 500 | 750 | 1000 | ||||||
| EP-300 | 1.6 | 600 | 900 | 1200 | ||||||
| EP-350 | 1.7 | 1050 | 1400 | |||||||
| EP-400 | 1.9 | 1600 | ||||||||
| EP-500 | 2.1 | 2000 | ||||||||
| Adhesive strength and elongation | |||||
| Core material | Adhesion strength | Elongation property | |||
| Interlayer | Overburden and cloth layer N/mm | Longitudinal Full Thickness | Longitudinal Full Thickness | ||
| N/mm | Overburden thickness ≤1.5mm | Overburden thickness ≥1.5mm | Elongation at break | Reference elongation | |
| Polyester canvas | ≥5 | ≥4.5 | ≥5 | ≥10% | ≤4% |
| Overlay Performance of Adhesive Tape | |||||
| Overlay Level | tensile strength | Elongation at break | Wear volume | Change rate of tensile strength and elongation at break after aging | |
| Mpa | Kgf/cm² | % | mm³ | % | |
| H | 24 | 240 | 450 | 120 | -25 ~ +25 |
| D | 18 | 180 | 400 | 100 | -25 ~ +25 |
| L | 15 | 150 | 350 | 200 | -25 ~ +25 |
| 2.ENDLESSCONVEYOR BELT Endlesss belt refers to the flat conveyor belt vulcanized joints (also known as hot sticky joints) will be used when the flat conveyor belt is used because of the restrictions of environment or conditions, so as to make it become a circular conveyor belt. |
| 3.CHEVRON (Patterned)CONVEYOR BELT Chevron conveyor belt is an inclined conveyor belt composed of cover glue with pattern on working face and cover glue with belt core with plane on non-working face. Patterns can be opened or closed, and each pattern can be divided into three types: high, medium and low. It is suitable for powder, granular and small pieces of material conveying with an inclination of less than 40 degrees. It can also convey bagged materials. |
| No.1 V6 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 6 | 1240 | 25 | <=1219 |
| No.2V6 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 6 | 2309 | 25 | 1200-2300 |
| No.3 C5 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 5 | 1400 | 100 | <=1200 |
| No.4 C12.7 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 12.7 | 914.4 | 200 | <=1300 |
| No.5 C3 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 3 | 610 | 43.7 | 650-1200 |
| No.6 C2 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 2 | 520 | 24.6 | 600-1200 |
| No.7 Open V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 580 | 250 | 600-1200 |
| No.8 Open V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 520 | 200 | 600-1200 |
| No.9 Open V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 300 | 146 | 400-1200 |
| No.10 Open V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 385 | 256 | 400-1200 |
| No.11 Closed V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 800 | 300 | 850-1200 |
| No.12 Closed V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 450 | 250 | 500-1200 |
| No.13 Closed V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 600 | 250 | 650-1200 |
| No.14 Closed V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 550 | 250 | 600-1200 |
| No.15 Closed V C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 750 | 250 | 800-1200 |
| No.16 Open U C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 435 | 320 | 500-1200 |
| No.17 Open U C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 450 | 160.9 | 500-1200 |
| No.18 C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 730 | 300 | 800-1200 |
| No.19 Open U C15 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 15 | 540 | 181.9 | 600-1200 |
| Chevron Cleated) Conveyor Belt ------We have more than 64 Chevron Mold. ------Support custom (Chevron )pattern mold. |
| No.20 Open U C32 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 32 | 900 | 330 | 1000-1200 |
| No.21 Open U C20 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 20 | 510 | 250 | 600-1200 |
| No.23 Open U C25 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 25 | 750 | 450 | 800-1200 |
| No.24 Open U C25 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 25 | 450 | 330 | 500-1200 |
| No.25 Open U C25 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 25 | 550 | 330 | 600-1200 |
| No.26 Open U C25 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 25 | 750 | 330 | 800-1200 |
| No.27 Closed V C12.5 | |||
| C.H.(mm) | C.W(mm) | C.P(mm) | B.W(mm) |
| 12.5 | 1067 | 381 | 1200-2200 |
| 4.STEEL CORD CONVEYOR BELT (Steel Wire Rope Core Rubber Conveyor Belt) The steel wire rope core conveyor belt is a rubber conveyor belt with steel wire as its skeleton. It has the advantages of high tensile strength, good impact resistance, long service life, small use elongation, good grooving, good flexibility resistance, and is suitable for long-distance, large-distance and high-speed conveying materials. The product is composed of core glue, wire rope, covering layer and side glueaterials. |
| Characteristic: 1,High allowable strength and high safety factor; 2,Minimal elongation, short stretching distance; 3,The steel wire rope is firmly bonded with rubber and has excellent dynamic performance; 4,Soft belt body, good grooving, good linear operation; 5,Excellent impact resistance; 6,Reliable joint, long service life. |
| Main Technical Parameters of Steel Wire Core Conveyor Belt in Germany | |||||||||||||||
| project | Number of wire rope roots | Width specification/mm | |||||||||||||
| 500 | 650 | 800 | 1000 | 1200 | 1400 | 1600 | 1800 | ||||||||
| Minimum Tensile Strength N/mm | Wire rope diameterd(maximum) | Rope distance±1.5mm | Covering glue thickness (minimum) | width | |||||||||||
| Width specification/mm | |||||||||||||||
| ±5 | ±7 | ±8 | ±10 | ±10 | ±12 | ±12 | ±14 | ||||||||
| St1000 | 1000 | 4.1 | 12 | 4 | 39 | 51 | 64 | 81 | 97 | 114 | 131 | 147 | |||
| St1250 | 1250 | 4.9 | 14 | 4 | 34 | 44 | 55 | 69 | 84 | 98 | 112 | 127 | |||
| St1600 | 1600 | 5.6 | 15 | 4 | - | - | 50 | 64 | 77 | 90 | 104 | 117 | |||
| St2000 | 2000 | 5.6 | 12 | 4 | - | - | 64 | 81 | 97 | 114 | 131 | 147 | |||
| St2500 | 2500 | 7.2 | 15 | 5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St3150 | 3150 | 8.1 | 15 | 5.5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St3500 | 3500 | 8.6 | 15 | 6.5 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| St4000 | 4000 | 8.9 | 15 | 7 | - | - | - | 64 | 77 | 90 | 104 | 117 | |||
| Performance Grade of Covering Rubber | |||
| Grade code | tensile strength,Mpa≥ | Elongation at break,%≥ | Wear volume,mm³≤ |
| D | 18 | 400 | 90 |
| H | 25 | 450 | 120 |
| L | 20 | 400 | 150 |
| P | 14 | 350 | 200 |
| notes: D-Strong Wear Working Conditions;H-Strong splitting working conditions;L-General working conditions |
|||
| P-Oil-resistant, heat-resistant, acid-alkali-resistant, cold-resistant and general non-flammable conveyor belts | |||
| Performance Grade of Covering Rubber | |||
| Executive standard DIN22131standard | |||
| Performance grade | tensile strength | Tensile ratio at break | Wear volume |
| <=mm³ | |||
| W | 18 | 400 | 90 |
| X | 25 | 450 | 120 |
| Y | 20 | 400 | 150 |
| K* | 20 | 400 | 200 |
| notes:*Suitable for general flame retardant conveyor belt conforming to DIN22103.Its covering glue meets the requirements of DIN22104. | |||
| 5.Heat Resistant CONVEYOR BELT (HR,EPDM,SBR+EPDM) The core of the product is polyester canvas with high modulus, low shrinkage and high breaking strength. The covering rubber is made of ethylene propylene diene monomer or chlorinated butyl rubber with good high temperature resistance. It is refined with high temperature resistant materials in conformity with forming and vulcanizing processes. After special impregnation and setting treatment, the product has high bonding strength, small elongation deformation and excellent abrasion performance under normal service conditions below 180 C. Mainly used in metallurgy, construction and other industries, transport sinter, coke, cement clinker and other high-temperature materials. |
| Physical property indexes | |||||
| project | category | ||||
| T1 | T2 | T3 | T4 | ||
| Test temperature | |||||
| ≤100ºC | ≤125ºC | ≤150ºC | ≤175ºC | ||
| Permissible range of change | |||||
| hardness | Difference between post-aging and pre-aging | 20 | 20 | ±20 | ±20 |
| Maximum after aging | 85 | 85 | 85 | 85 | |
| tensile strength | Performance change rate/% | -25 | -30 | -40 | -40 |
| Minimum post-aging value/Mpa | 12 | 10 | 5 | 5 | |
| Elongation at break | Post-aging change rate/% | -50 | -50 | -55 | -55 |
| Minimum value after aging/% | 200 | 200 | 180 | 180 | |
| 6.Fire Resistant CONVEYOR BELT (K2,K3) This product is refined from polyester canvas and nylon canvas through calendering, forming and vulcanizing processes. This product is suitable for conveying non-corrosive, non-spiky, bulk, granular and powder materials, such as coal and other bulk or finished goods, in the upper inflammable and explosive environment of coal mines. |
| Overlay Performance | |||
| project | Company | level L | level D |
| tensile strength | Mpa | ≥14 | ≥18 |
| Elongation at break | % | ≥400 | ≥450 |
| Safety performance | ||
| project | Flame Retardant Grade | |
| K2 | K3 | |
| Flame duration | The total flame duration of six coated specimens is not more than 45s, and any single value is not more than 15s. | The average flame duration of three coated specimens is not more than 60 s. |
| Electrostatic conductivity ≤3*10 8Ω | ||
| Reburning property | No flame shall reappear on any specimen | |
| 7.High Abrasion Conveyor Belt Through the measures of lightweight conveyor belt body, increasing rubber elasticity and reducing rubber friction coefficient, the operation resistance of conveyor device to belt surface during conveyor belt operation can be greatly reduced, and reasonable transmission friction coefficient can be obtained, which can save electricity by 10-15%.The effect. The surface coating has high elasticity and excellent wear resistance, which makes the conveyor belt wear-resistant, impact-resistant and prolongs its service life. It is suitable for medium and long distance material transportation in mining, wharf, electric power, metallurgy, chemical industry, coal and other industries. Product characteristics: It saves electricity, does not need equipment modification and has high safety factor. |
| 8.Oil Resistant CONVEYOR BELT Oil Resistant Belt The nylon canvas and polyester canvas are refined by calendering, forming and vulcanizing processes. They have good oil resistance and are suitable for oil-containing materials in conveyor belts and occasions where oil and chemical solvents may occur. Specifically, it has the advantages of low volume change rate, high strength and wide application range. |
| Technical index | ||
| 1. Oil-resistant conveyor belts can be divided into wear-resistant type (D) and general type (L) according to their covering properties. | ||
| 2. Oil resistance can be divided into Y1 and Y2 grades. |
| 9.Anti Tear CONVEYOR BELT |
| 10.Akli-Acid Resistant Belt it is a kind of inert material which is suitable for working environment in contact with acid and alkali, such as phosphate fertilizer manufacturing, seawater salt drying, covering rubber and plastic blending and filling with excellent acid and alkali resistance. |
| Technical indexes | |||||||
| project | tensile strength/Mpa | Elongation at break% | Wear volume/mm³ | hardness/Ao | Ozone aging | ||
| Cover gum | physical property | Before aging | ≥14.0 | ≥400 | ≥250 | 55-70 | No crack |
| After aging | ≥12.0 | ≥340 | -- | 60-75 | -- | ||
| Acid and alkali resistance | category | Soaking solution | concentration | Soaking condition | Performance change rate before and after soaking | ||
| Volume Expansion Rate | Tensile Strength Change Rate | ||||||
| A1 | hydrochloric acid | 18% | 50ºC×96h | +10%Following | -10%within | ||
| A2 | sulphuric acid | 50% | 50ºC×96h | +10%Following | -10%within | ||
| A3 | sodium hydroxide | 48% | 50ºC×96h | +10%Following | -10%within | ||
| Test conditions:Ozone concentration(50±5)*10(volume fraction),temperature(40±2)ºC,elongation(20±2)%,time15h | |||||||
| 11.Filter belt |
| 12.Pipe Conveyor Belt |
Pipe Conveyor Belt refers to the conveyor belt matched with the circular pipe belt conveyor, which forms the shape of a circular pipe in the whole or part of the transportation line by means of external force.Pipe Conveyor Belt,the core body is composed of high strength canvas or steel wire rope, high strength, high wear resistance and high quality rubber as upper and lower covering layer. When working, the tape gradually changes from plane to U shape, and finally rolls into tubular shape to implement closed conveying. |
| Technical parameters of Pipe Conveyor Belt | ||||
| pipe diameter/mm | bandwidth/mm | Breaking strength | Fabric layer | Covering glue thickness/mm |
| N/mm | ||||
| 100 | 430 | 250 | 1 | 3.0×1.5 |
| 150 | 600 | 160 | 2 | 3.0×2.0 |
| 315 | 2 | 3.0×2.0 | ||
| 200 | 750 | 500 | 2 | 3.0×2.0 |
| 315 | 2 | 3.0×2.0 | ||
| 500 | 2 | 5.0×2.0 | ||
| 250 | 2 | 5.0×2.0 | ||
| 250 | 1000 | 400 | 2 | 3.0×2.0 |
| 500 | 2 | 3.0×2.0 | ||
| 400 | 2 | 5.0×2.0 | ||
| 500 | 2 | 3.0×2.0 | ||
| 300 | 1100 | 400 | 2 | 3.0×2.0 |
| 500 | 2 | 3.0×2.0 | ||
| 400 | 2 | 3.0×2.0 | ||
| 500 | 2 | 5.0×2.0 | ||
| 350 | 1300 | 630 | 3 | 5.0×2.0 |
| 800 | 4 | 5.0×2.0 | ||
| 400 | 1600 | 800 | 4 | 5.0×2.0 |
| 1000 | 5 | 5.0×2.0 | ||
| 13.Rough Top Conveyor Belt Rough top belt can be used for tilt angleLight materials such as bags, boxes and parcels are transported at 35 degrees angle. The top rubber surface is wear-resistant and skid-resistant rubber. It has the functions of cushioning, shock absorption and stabilization for material transportation, especially anti-skid. |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}