Enameled Wire Electric Scraping Paint Hand-held Tools Adjustable Detachable
Performance and parameters
| Model |
Scratchable wire diameter range(mm) |
Scratchable length range(mm) |
Motor Power(V/W) |
Speed mode |
Weight(Kg) |
| WDDF-6 |
φ0.3-1.5 |
3-50 |
~220V/25W |
Stepless Speed |
0.5 |
| WDDF-1A |
φ0.3-3.2 |
3-50 |
~220V/100W |
Stepless Speed |
1.4 |
| WDDF-1 |
φ1.0-3.2 |
3-50 |
~220V/100W |
Stepless Speed |
1.4 |
| WDSM-8 |
φ0.3-1.5 |
3-50 |
~220V/25W |
Stepless Speed |
0.5 |
| WDSM-2 |
φ0.3-3.2 |
3-50 |
~220V/100W |
Stepless Speed |
1.4 |
| WDSM-1 |
φ1.0-3.2 |
3-50 |
~220V/100W |
Stepless Speed |
1.4 |
Use
The new generation of enameled wire electric paint scraper is a national patented product developed by our company. The machine adopts the current international advanced electric paint scraping technology. The whole machine is composed of an electronic step-less speed controller, a single-phase series motor, and a paint scraping blade. It adopts a lightweight and durable miniature jog switch and a spinning carbon brush. device. It can easily and quickly scrape off the insulating paint film on the surface of various enameled wires without damaging the substrate. , not only greatly improve the wire welding efficiency but also significantly improve the welding quality. It has the remarkable characteristics of fast paint scraping speed, high efficiency, simple operation, convenient installation, stable quality of the whole machine, low failure rate, high production efficiency, and novel design. It is an ideal paint scraping tool for coil manufacturing and maintenance industries such as motors, electrical appliances, instruments, transformers, electronics, household appliances, and power tools.
Six-speed stepless speed regulation
Adapt to various wire diameters in the range of 0.35-3.25mm, and the stripping speed is more flexible.
long-lasting
The three-claw cutter head is made of tungsten steel welded floor to the handle and uses different enameled wires to run at high strength.
Shockproof
The sealing impact enameled wire adopts 99.99% pure copper wire with excellent bearing, which makes the rotor run more smoothly and has a long life.
Structural composition
1. The hand-held electric paint scraper is composed of an electronic stepless regulator, a single-phase series motor and a paint scraping blade. It adopts a light and durable micro-touch switch and a spinning carbon brush. It has the remarkable characteristics of fast paint scraping, high efficiency, simple operation, easy installation, stable quality, low failure rate, high production efficiency, and novel design.
2. The stationary electric paint scraper is composed of two parts, which are electric power components (single-phase and series motor), scraper frame and governor.
Operation method
1. Insert the end of the enameled wire to be scraped into the center of the knife holder, press the power start switch (handheld) or the pedal governor (fixed), and the motor will rotate immediately.
2. Move the enameled wire in the opposite direction of the axial direction until the end of the enameled wire, then the paint film can be scraped off.
3. Release the power button switch (handheld) or loosen the governor (fixed).
4. To replace the work, repeat the above steps.
Wire diameter adjustment and related matters
1. Within half a year of the motor part of this product, due to the reasons of the product itself, three guarantees are implemented for the quality. After long-term use of brushes and blades, when users need to replace them, they can contact our company for replacement, charge the cost of production and mail them on their behalf.
2. When scraping the paint to the end of the enameled wire, the end should not be separated from the three blades immediately, and the intersection of the cutting edges should wait for the cutter to stop rotating before disengaging, so as to avoid the enameled wire suddenly breaking away from the cutting edge and damaging the cutting edge when rotating.
3. Before the enameled wire is scratched, it must be slightly straightened by hand to avoid the enameled wire being misaligned with the center of the cutting edge.
4. After a long time of use, in the case of no power supply, the safety cover can be unscrewed to remove the peeled paint film powder.
Packaging & Shipping
General package(Paper carton or plastic bag): For small goods, Package it with form and pack paper to guarantee unbroken during the transport.
Wooden case package: For larger scale goods such as machine equipment etc, we have a special skilled carpenter, who would make the proper wooden case with exact thickness, density, and length. The up arrow ↑marked on the outer wooden case. Buffer material would be put in the wooden case to prevent crack and shock. We will inform you of the delivery note. You just need to wait for a phone call, then pick up the goods at the nearest logistic station. (Please let me know in advance if you want to get the goods at home.)
Shipping:
A. 3-5 workdays shipping from China by Air/Express(DHL, FedEx, UPS, EMS, etc.)
B. 3-5 workdays shipping from UK Warehouse to European union countries.No need to pay for customs duties and VAT.
C. 25-30 workdays shipping from China to Russian customers. No need to pay for customs duties and VAT.
D. We can arrange shipment by sea. Minium CBM requirement : 1 CBM
After Sales Service
1. We provide you with a friendly English User manual or operating videos for free.
2.24 hours of technical support by email or call.
3. Warranty: 1 year free, 2-3 years cost price, and free technical support always.
4. Free training to make sure you master the operation of our products.
5. OEM/ODM accept. But the MOQ of OEM/ODM is 100 sets.
Service tenet
Provide you the best service with "fast + satisfactory + safe".
Warranty period:
12 months long after the user received the product.
){kind=link}
){kind=link}