Shangrao, Jiangxi, China
Member Since: 2014
Business Type: Manufacturer/Factory
Material: zinc alloy
Use method of electronic password lock:
1. The factory password is "0". Press OK after the password.
Install two no.7 alkaline batteries in the battery box on the back of the lock body for the first time. Press 0 and OK and turn the knob clockwise to unlock the lock after hearing the sound of (di -)., can be used normally;Please put the external power supply outside the cabinet for safekeeping and backup. It can be used for emergency lock opening when the power is low.
2, password setting method: press 0 (note: 0 is the factory password) → press C button → enter new password (example: 12345678) → press OK button, and the new password will take effect after hearing the long tone (di -).(password is between 1 and 15 digits)
The password is set and changed by the user.
Turn the knob counterclockwise to LOCK the LOCK.
4. Automatic alarm:
If the password entered four times in a row is wrong, the electronic combination lock will alarm.The alarm will last for 60 seconds. During this period, enter the correct password and press OK to cancel the alarm.This feature prevents others from cracking passwords.
5. Power shortage tip:
When the battery is low, it will beep three times when opening the lock.The lock can be unlocked about 100 times when the battery is exhausted. Please replace the battery as soon as possible.
6. Use emergency power supply:
If the electronic combination lock is not equipped with battery or fails to replace the internal battery in time due to business trip or other reasons, connect the 9V battery to the emergency power interface to unlock the lock (note the positive and negative poles of the power supply).Emergency power supply is only used for emergency unlock. 2 no.7 batteries should be installed immediately after opening the door.Do not use the emergency power for a long time, otherwise the emergency power will be exhausted within 24 hours.
7. Emergency decoding:
When the user accidentally forget the password, can contact the manufacturer to apply for decoding (that is, management code reset)
|The coin lock with master key|