KDZG-31 Electric Rail Drilling Machine Product Introduction:
Electric rail drilling machine is an ideal rail drilling tool for railway engineering, bridge, line overhaul and other departments. It is suitable for the laying of railways, line maintenance. Emergency repairs. Especially for the drilling operations of sections and sections with power and electricity. It can be applied to rails of various specifications of 50Kg-60kg/m.
Electric Drilling Machine Rail Hole Drill Tools
| model# |
KDZG-31 |
| rail |
50Kg-60kg/m |
| power |
220V,1000W |
| Cutomized |
Yes |
| range of hole |
Φ9.8mm-Φ31mm |
| Speed |
180-210r/min |
| Installation time |
20-30s |
| Unstallation time |
15-20s |
| Drilling hole time |
in 50s |
| Distance of hole D |
±0.5mm |
| Size of machine |
650×500×450(mm) |
| Weight |
22kg |
| Applicated rail |
50-60kg/m |
Features of KDZG-31 Electric Rail Drilling Machine:
1. This machine adopts 220V, 1000W micro motor.
2. This machine adopts the transmission method of continuous wheels, which can exert the cutting power to the limit of general-purpose drills. Fast speed. High efficiency and low noise.
3. This machine has advanced design, reasonable structure, convenient maintenance, easy maintenance, small size and light weight.
4. The clamping rail part of this machine adopts two sets of four-link clamping mechanism, which is flexible in loading and unloading, clamping firmly and reliably, and working smoothly.
5. The machine adopts the imitation block positioning, and the corresponding imitation positioning block (the attachment of the positioning block) can be replaced for various types of rails, so the positioning is accurate.
6. There are two sets of devices on the left side of this machine. The outer device is a fixed hole device, the inner device is a rail fixing device, and the inner device is provided with a large column and a small column. Only one hole can be drilled at the tight rail end, and after drilling, insert the outer positioning pin into the hole and clamp the second hole to drill three holes in sequence.
When drilling a hole on a 60kg steel rail, the method of drilling the small cylinder against the rail end is the same as above.
Application Sites:
Features of KDZG-31 Electric Rail Drilling Machine:
){kind=link}
){kind=link}