Easy To Use And Persistent Drones Tether Power Station For Traffic Monitoring
One of the key aspects of the Easy To Use And Persistent Drones Tether Power Station is its ability to maintain power integrity despite the dynamic movements of the drone during flight. The tether, made from advanced conductive materials, not only transfers power but also facilitates data communication between the drone and the ground station, further enhancing the real-time capabilities of aerial surveys.
I.Typical Characterist
1.It is small size ,light weight and backpack storage.it is easy to carry.
2.Simple operations,the entire process of drone taking off and landing does not require the operation of ground module .
3.Comprehensive input /output protection,fault elimination and self recover.
4.Fully automatic take up and pay off function,the wire can be rewound under power loss.
5.The air module power supply has a constant voltage output,and the back u
p battery has no charging and discharging phenomenon.
II,Adapted M350 drone.
1.Supporting flight duration:≥24h.
2.Supporting flight altitude:≥50/100/150m(tethered cable length:55/110/160m,Reserve safe length).
3.Optional lighting group:640w or 1280w
III,Function characteristics
1.Protection functions:Separate design for strong and weak electricity.input overvoltage and undervoltage protection,output overvoltage ,output overcurrent,output circuit,output over temperature protection.input and output voltage resistance ≥3000VDC,tethered cable insulation voltage resistance≥3500VDC.
2.Data communication:wired and wireless communication function.Support remote display and control,client-side data viewing and downloading.
3.Data display function:The touch screen displays data such as output voltage,output current,output power, cable outlet length,working duration,installation temperature,total power consumption,fault record,and working status information.
4.Set and adjustment:the display screen supports setting and adjustment the parameters such as take-up and payoff tension and speed,data and time,output voltage,safety lengths,warning temperature,ect...,and support the switching between Chinese and English.
5.Alerts and reminds:Failure the screen displays the contents of the fault,the buzzer strong sound reminder.
6.Automatic take-up and payoff:following take off and landing of the drone to synchronously tethered cable take-up and payoff,adjusting the tension auto management,and manually press the button to reaction the cable while power cut off.
7.Carry and transport:Equipment portability,with a backpack design,it can be equipped with a complete set of tethered power system. 8.Power supply can be equipped with 5800W/7000Wh, outdoor mobile power or 4300W/6L gasoline inverter generator (specification attached).
IV,Parameters
items |
Technical parameters |
Model |
TPS55M-M350 |
TPS110M-M350 |
TPS160M-M350 |
Cable length |
55M |
110M |
160M |
Ambient temperature |
-20~45ºC(working),-40~65ºC(storage) |
Relative humidity |
10~80%RH(working),5~90%RH(storage) |
Altitude |
≤3000m |
Ground power module |
Input voltage |
190~240Vac wide range input,single-phase 220Vac,frequency 50/60Hz |
Output voltage |
600~800Vdc adjustable,Factory Default 800Vdc |
Output power |
≥3500W(Rated Long-Time Output),≥4000W(peak value≮30s) |
take-up and payoff speed |
0~2m/s,adjustable |
take-up and payoff tensile |
0~10N,adjustable |
interface |
Input switched 3-pole socket,tethered cable output XT60 connector |
Button and switch |
High-voltage on/off button,cable forced retraction button,back up battery button |
Protection level |
IPx4 |
Size |
D360×W180×H260±0.5mm,excluding foot pads and handles |
Weight |
8.5±0.2kg,excluding tethered cable |
Tethered cable |
Material |
Silver plated lightweight high-temperature resistant aviation wire,lightweight high-temperature resistant sheath. |
Current |
3~5A |
DC resistance |
10.5±0.2Ω,100m@20ºCloop |
Resistance Tensile strength |
≥20kg,resistant to repeated reaction and release times≥500 |
Insulation strength |
≥3500Vdc,1min, no breakdown |
Cable length |
standard equipment 55m,optional 110m and 160m |
Outer diameter |
2.3±0.1mm |
Weight |
10±0.5g/m |
Air module |
Input voltage |
580~810Vdc wide range input |
Output voltage |
51.5Vdc±1%,constant voltage output,support voltage customization |
Output power |
≥3000W(rated long-term output),≥3500W(peak value≮10s) |
Protection function |
Input over voltage,under voltage protection,output over voltage,over current,short circuit,and over temperature protection |
Communication function |
Optional CAN communication to report voltage, current, temperature data and operating status information. |
Isolation voltage |
≥3000V(Vin-Vout),1min,Current leakage 5mA,no breakdown,flying arc and corona phenomenon |
Installation method |
Replacement battery latch, docking battery, side mounting |
Heat dissipation |
External fan for active cooling, reserved air ducts for forced air cooling |
Interface |
Input XT60,output XT60,output battery interface |
Protection level |
IP54 |
Size |
158×92×115±0.5mm,excluding connector |
Weight |
960±10g,excluding outer connector and wire |
packages |
Size |
550×420×260±5mm(backpack size),600×450×300±5mm(Carton Size) |
Weight |
14.5±1kg,including ground power module,air module,Annexes and documents |
1,Unless otherwise specified,All of the above data are in Ta=25ºC,humidity<75%,nominal Input and rated Load.
2,Due to space limitations,there is incomplete data in the sheet.please contact our sales personnel to obtain it.