Dnetal Lab Equipment High Power Circular Vibration Gypsum Oscillator
Specialized Instrument Equipment
The oscillator consists mainly of the base and the gypsum, and is equipped with an oscillating strength adjustment button.
Operation use: After the power is turned on, place the gypsum model to be oscillated on the oscillator plate, turn on the adjustment knob, adjust the clockwise direction to increase the oscillation, and counterclockwise to reduce the oscillation. After the model is oscillated, turn off the knob to stop the oscillation. The model can be removed for use.
Tips: When adjusting the knob, the speed should not be too fast. Slowly turn the knob from small to large or from large to small. The power should be cut off after use. Always scrub the surface of the body and keep it clean to extend its life.